[PATCH 3.16 037/366] thermal: imx: Fix race condition in imx_thermal_probe()

[Ben Hutchings]

3.16.60-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Mikhail Lappo <mikhail.lappo@xxxxxxxxxxx>

commit cf1ba1d73a33944d8c1a75370a35434bf146b8a7 upstream.

When device boots with T > T_trip_1 and requests interrupt,
the race condition takes place. The interrupt comes before
THERMAL_DEVICE_ENABLED is set. This leads to an attempt to
reading sensor value from irq and disabling the sensor, based on
the data->mode field, which expected to be THERMAL_DEVICE_ENABLED,
but still stays as THERMAL_DEVICE_DISABLED. Afher this issue
sensor is never re-enabled, as the driver state is wrong.

Fix this problem by setting the 'data' members prior to
requesting the interrupts.

Fixes: 37713a1e8e4c ("thermal: imx: implement thermal alarm interrupt handling")
Signed-off-by: Mikhail Lappo <mikhail.lappo@xxxxxxxxxxx>
Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxx>
Reviewed-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
Acked-by: Dong Aisheng <aisheng.dong@xxxxxxx>
Signed-off-by: Zhang Rui <rui.zhang@xxxxxxxxx>
Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
---
 drivers/thermal/imx_thermal.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -484,6 +484,9 @@ static int imx_thermal_probe(struct plat
 	regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN);
 	regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP);
 
+	data->irq_enabled = true;
+	data->mode = THERMAL_DEVICE_ENABLED;
+
 	ret = devm_request_threaded_irq(&pdev->dev, data->irq,
 			imx_thermal_alarm_irq, imx_thermal_alarm_irq_thread,
 			0, "imx_thermal", data);
@@ -495,9 +498,6 @@ static int imx_thermal_probe(struct plat
 		return ret;
 	}
 
-	data->irq_enabled = true;
-	data->mode = THERMAL_DEVICE_ENABLED;
-
 	return 0;
 }