Re: [V2, 2/5] Documentation: dt-bindings: Document the Synopsys MIPI DPHY Rx bindings

[Luis Oliveira]

Hi Rob,

On 12-Oct-18 17:45, Rob Herring wrote:
> On Thu, Sep 20, 2018 at 01:16:40PM +0200, Luis Oliveira wrote:
>> Add device-tree bindings documentation for SNPS DesignWare MIPI D-PHY in
>> RX mode.
> 
> "dt-bindings: phy: ..." for the subject.
> 
Yes, you are right.

>>
>> Signed-off-by: Luis Oliveira <lolivei@xxxxxxxxxxxx>
>> ---
>> Changelog
>> v2:
>> - no changes
>>
>>  .../devicetree/bindings/phy/snps,dphy-rx.txt       | 36 ++++++++++++++++++++++
>>  1 file changed, 36 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/phy/snps,dphy-rx.txt
>>
>> diff --git a/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt b/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt
>> new file mode 100644
>> index 0000000..9079f4a
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt
>> @@ -0,0 +1,36 @@
>> +Synopsys DesignWare MIPI Rx D-PHY block details
>> +
>> +Description
>> +-----------
>> +
>> +The Synopsys MIPI D-PHY controller supports MIPI-DPHY in receiver mode.
>> +Please refer to phy-bindings.txt for more information.
>> +
>> +Required properties:
>> +- compatible		: Shall be "snps,dphy-rx".
>> +- #phy-cells		: Must be 1.
>> +- snps,dphy-frequency	: Output frequency of the D-PHY.
>> +- snps,dphy-te-len	: Size of the communication interface (8 bits->8 or 12bits->12).
>> +- reg			: Physical base address and size of the device memory mapped
>> +		 	  registers;
>> +
>> +Optional properties:
>> +- snps,compat-mode	: Compatibility mode control
> 
> type? values?
> 

I will remove this in V3.

>> +
>> +The per-board settings:
>> +- gpios 		: Synopsys testchip used as reference uses this to change setup
>> +		  	  configurations.
> 
> Preferred to be named (e.g. foo-gpios). How many? What are their 
> functions?
> 

Ok, thanks for reviewing this.

>> +
>> +Example:
>> +
>> +	mipi_dphy_rx1: dphy@3040 {
>> +		compatible = "snps,dphy-rx";
>> +		#phy-cells = <1>;
>> +		snps,dphy-frequency = <300000>;
>> +		snps,dphy-te-len = <12>;
>> +		snps,compat-mode = <1>;
>> +		reg = < 0x03040 0x20
>> +			0x08000 0x100
>> +			0x09000 0x100>;
>> +	};
>> +
>> -- 
>> 2.9.3
>>