Re: [PATCH v4 3/7] arm64: dts: allwinner: axp803: add AC and battery power supplies

From: Chen-Yu Tsai
Date: Tue Oct 16 2018 - 00:12:04 EST


On Sat, Oct 13, 2018 at 4:09 PM Oskari Lemmela <oskari@xxxxxxxxxxx> wrote:
>
> AXP803 is compatible with AXP813. Add DT nodes ADC, GPIO,
> AC and battery power supplies.
>
> Signed-off-by: Oskari Lemmela <oskari@xxxxxxxxxxx>
> Reviewed-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/allwinner/axp803.dtsi | 31 +++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi
> index e5eae8bafc42..128177178615 100644
> --- a/arch/arm64/boot/dts/allwinner/axp803.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi
> @@ -49,6 +49,37 @@
> interrupt-controller;
> #interrupt-cells = <1>;
>
> + ac_power_supply: ac-power-supply {
> + compatible = "x-powers,axp813-ac-power-supply";

Even though they seem to be compatible, please add a model specific
compatible string in front for all the new nodes just in case. In
this case it would be "x-powers,axp803-ac-power-supply".

ChenYu

> + status = "disabled";
> + };
> +
> + axp_adc: adc {
> + compatible = "x-powers,axp813-adc";
> + #io-channel-cells = <1>;
> + };
> +
> + axp_gpio: gpio {
> + compatible = "x-powers,axp813-gpio";
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio0_ldo: gpio0-ldo {
> + pins = "GPIO0";
> + function = "ldo";
> + };
> +
> + gpio1_ldo: gpio1-ldo {
> + pins = "GPIO1";
> + function = "ldo";
> + };
> + };
> +
> + battery_power_supply: battery-power-supply {
> + compatible = "x-powers,axp813-battery-power-supply";
> + status = "disabled";
> + };
> +
> regulators {
> /* Default work frequency for buck regulators */
> x-powers,dcdc-freq = <3000>;
> --
> 2.17.1
>