[PATCH v5 3/3] arm64: dts: stingray: Add Stingray Thermal DT support.

[Srinath Mannam]

From: Pramod Kumar <pramod.kumar@xxxxxxxxxxxx>

Add DT nodes for thermal zones memory base address
to read temperature.

Signed-off-by: Pramod Kumar <pramod.kumar@xxxxxxxxxxxx>
Signed-off-by: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
Reviewed-by: Ray Jui <ray.jui@xxxxxxxxxxxx>
Reviewed-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
---
 .../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 89 ++++++++++++++++++++++
 1 file changed, 89 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index e283480..0d246ba 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -612,4 +612,93 @@
 			status = "disabled";
 		};
 	};
+
+	tmons {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x8f100000 0x100>;
+
+		tmon: tmon@0 {
+			compatible = "brcm,sr-thermal";
+			reg = <0x0 0x40>;
+			brcm,tmon-mask = <0x3f>;
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		ihost0_thermal: ihost0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 0>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		ihost1_thermal: ihost1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 1>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		ihost2_thermal: ihost2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 2>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		ihost3_thermal: ihost3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 3>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		crmu_thermal: crmu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 4>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		nitro_thermal: nitro-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 5>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };
-- 
2.7.4