[PATCH 4.18 041/135] net: stmmac: Rework coalesce timer and fix multi-queue races

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jose Abreu <Jose.Abreu@xxxxxxxxxxxx>

[ Upstream commit 8fce3331702316d4bcfeb0771c09ac75d2192bbc ]

This follows David Miller advice and tries to fix coalesce timer in
multi-queue scenarios.

We are now using per-queue coalesce values and per-queue TX timer.

Coalesce timer default values was changed to 1ms and the coalesce frames
to 25.

Tested in B2B setup between XGMAC2 and GMAC5.

Signed-off-by: Jose Abreu <joabreu@xxxxxxxxxxxx>
Fixes: 	ce736788e8a ("net: stmmac: adding multiple buffers for TX")
Cc: Florian Fainelli <f.fainelli@xxxxxxxxx>
Cc: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
Cc: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
Cc: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
Cc: David S. Miller <davem@xxxxxxxxxxxxx>
Cc: Joao Pinto <jpinto@xxxxxxxxxxxx>
Cc: Giuseppe Cavallaro <peppe.cavallaro@xxxxxx>
Cc: Alexandre Torgue <alexandre.torgue@xxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/net/ethernet/stmicro/stmmac/common.h      |    4 
 drivers/net/ethernet/stmicro/stmmac/stmmac.h      |   14 +
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c |  234 ++++++++++++----------
 include/linux/stmmac.h                            |    1 
 4 files changed, 146 insertions(+), 107 deletions(-)

--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -256,10 +256,10 @@ struct stmmac_safety_stats {
 #define MAX_DMA_RIWT		0xff
 #define MIN_DMA_RIWT		0x20
 /* Tx coalesce parameters */
-#define STMMAC_COAL_TX_TIMER	40000
+#define STMMAC_COAL_TX_TIMER	1000
 #define STMMAC_MAX_COAL_TX_TICK	100000
 #define STMMAC_TX_MAX_FRAMES	256
-#define STMMAC_TX_FRAMES	64
+#define STMMAC_TX_FRAMES	25
 
 /* Packets types */
 enum packets_types {
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -48,6 +48,8 @@ struct stmmac_tx_info {
 
 /* Frequently used values are kept adjacent for cache effect */
 struct stmmac_tx_queue {
+	u32 tx_count_frames;
+	struct timer_list txtimer;
 	u32 queue_index;
 	struct stmmac_priv *priv_data;
 	struct dma_extended_desc *dma_etx ____cacheline_aligned_in_smp;
@@ -73,7 +75,14 @@ struct stmmac_rx_queue {
 	u32 rx_zeroc_thresh;
 	dma_addr_t dma_rx_phy;
 	u32 rx_tail_addr;
+};
+
+struct stmmac_channel {
 	struct napi_struct napi ____cacheline_aligned_in_smp;
+	struct stmmac_priv *priv_data;
+	u32 index;
+	int has_rx;
+	int has_tx;
 };
 
 struct stmmac_tc_entry {
@@ -109,14 +118,12 @@ struct stmmac_pps_cfg {
 
 struct stmmac_priv {
 	/* Frequently used values are kept adjacent for cache effect */
-	u32 tx_count_frames;
 	u32 tx_coal_frames;
 	u32 tx_coal_timer;
 
 	int tx_coalesce;
 	int hwts_tx_en;
 	bool tx_path_in_lpi_mode;
-	struct timer_list txtimer;
 	bool tso;
 
 	unsigned int dma_buf_sz;
@@ -137,6 +144,9 @@ struct stmmac_priv {
 	/* TX Queue */
 	struct stmmac_tx_queue tx_queue[MTL_MAX_TX_QUEUES];
 
+	/* Generic channel for NAPI */
+	struct stmmac_channel channel[STMMAC_CH_MAX];
+
 	bool oldlink;
 	int speed;
 	int oldduplex;
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -147,12 +147,14 @@ static void stmmac_verify_args(void)
 static void stmmac_disable_all_queues(struct stmmac_priv *priv)
 {
 	u32 rx_queues_cnt = priv->plat->rx_queues_to_use;
+	u32 tx_queues_cnt = priv->plat->tx_queues_to_use;
+	u32 maxq = max(rx_queues_cnt, tx_queues_cnt);
 	u32 queue;
 
-	for (queue = 0; queue < rx_queues_cnt; queue++) {
-		struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
+	for (queue = 0; queue < maxq; queue++) {
+		struct stmmac_channel *ch = &priv->channel[queue];
 
-		napi_disable(&rx_q->napi);
+		napi_disable(&ch->napi);
 	}
 }
 
@@ -163,12 +165,14 @@ static void stmmac_disable_all_queues(st
 static void stmmac_enable_all_queues(struct stmmac_priv *priv)
 {
 	u32 rx_queues_cnt = priv->plat->rx_queues_to_use;
+	u32 tx_queues_cnt = priv->plat->tx_queues_to_use;
+	u32 maxq = max(rx_queues_cnt, tx_queues_cnt);
 	u32 queue;
 
-	for (queue = 0; queue < rx_queues_cnt; queue++) {
-		struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
+	for (queue = 0; queue < maxq; queue++) {
+		struct stmmac_channel *ch = &priv->channel[queue];
 
-		napi_enable(&rx_q->napi);
+		napi_enable(&ch->napi);
 	}
 }
 
@@ -1822,18 +1826,18 @@ static void stmmac_dma_operation_mode(st
  * @queue: TX queue index
  * Description: it reclaims the transmit resources after transmission completes.
  */
-static void stmmac_tx_clean(struct stmmac_priv *priv, u32 queue)
+static int stmmac_tx_clean(struct stmmac_priv *priv, int budget, u32 queue)
 {
 	struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
 	unsigned int bytes_compl = 0, pkts_compl = 0;
-	unsigned int entry;
+	unsigned int entry, count = 0;
 
-	netif_tx_lock(priv->dev);
+	__netif_tx_lock_bh(netdev_get_tx_queue(priv->dev, queue));
 
 	priv->xstats.tx_clean++;
 
 	entry = tx_q->dirty_tx;
-	while (entry != tx_q->cur_tx) {
+	while ((entry != tx_q->cur_tx) && (count < budget)) {
 		struct sk_buff *skb = tx_q->tx_skbuff[entry];
 		struct dma_desc *p;
 		int status;
@@ -1849,6 +1853,8 @@ static void stmmac_tx_clean(struct stmma
 		if (unlikely(status & tx_dma_own))
 			break;
 
+		count++;
+
 		/* Make sure descriptor fields are read after reading
 		 * the own bit.
 		 */
@@ -1916,7 +1922,10 @@ static void stmmac_tx_clean(struct stmma
 		stmmac_enable_eee_mode(priv);
 		mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(eee_timer));
 	}
-	netif_tx_unlock(priv->dev);
+
+	__netif_tx_unlock_bh(netdev_get_tx_queue(priv->dev, queue));
+
+	return count;
 }
 
 /**
@@ -1999,6 +2008,33 @@ static bool stmmac_safety_feat_interrupt
 	return false;
 }
 
+static int stmmac_napi_check(struct stmmac_priv *priv, u32 chan)
+{
+	int status = stmmac_dma_interrupt_status(priv, priv->ioaddr,
+						 &priv->xstats, chan);
+	struct stmmac_channel *ch = &priv->channel[chan];
+	bool needs_work = false;
+
+	if ((status & handle_rx) && ch->has_rx) {
+		needs_work = true;
+	} else {
+		status &= ~handle_rx;
+	}
+
+	if ((status & handle_tx) && ch->has_tx) {
+		needs_work = true;
+	} else {
+		status &= ~handle_tx;
+	}
+
+	if (needs_work && napi_schedule_prep(&ch->napi)) {
+		stmmac_disable_dma_irq(priv, priv->ioaddr, chan);
+		__napi_schedule(&ch->napi);
+	}
+
+	return status;
+}
+
 /**
  * stmmac_dma_interrupt - DMA ISR
  * @priv: driver private structure
@@ -2013,57 +2049,14 @@ static void stmmac_dma_interrupt(struct
 	u32 channels_to_check = tx_channel_count > rx_channel_count ?
 				tx_channel_count : rx_channel_count;
 	u32 chan;
-	bool poll_scheduled = false;
 	int status[max_t(u32, MTL_MAX_TX_QUEUES, MTL_MAX_RX_QUEUES)];
 
 	/* Make sure we never check beyond our status buffer. */
 	if (WARN_ON_ONCE(channels_to_check > ARRAY_SIZE(status)))
 		channels_to_check = ARRAY_SIZE(status);
 
-	/* Each DMA channel can be used for rx and tx simultaneously, yet
-	 * napi_struct is embedded in struct stmmac_rx_queue rather than in a
-	 * stmmac_channel struct.
-	 * Because of this, stmmac_poll currently checks (and possibly wakes)
-	 * all tx queues rather than just a single tx queue.
-	 */
 	for (chan = 0; chan < channels_to_check; chan++)
-		status[chan] = stmmac_dma_interrupt_status(priv, priv->ioaddr,
-				&priv->xstats, chan);
-
-	for (chan = 0; chan < rx_channel_count; chan++) {
-		if (likely(status[chan] & handle_rx)) {
-			struct stmmac_rx_queue *rx_q = &priv->rx_queue[chan];
-
-			if (likely(napi_schedule_prep(&rx_q->napi))) {
-				stmmac_disable_dma_irq(priv, priv->ioaddr, chan);
-				__napi_schedule(&rx_q->napi);
-				poll_scheduled = true;
-			}
-		}
-	}
-
-	/* If we scheduled poll, we already know that tx queues will be checked.
-	 * If we didn't schedule poll, see if any DMA channel (used by tx) has a
-	 * completed transmission, if so, call stmmac_poll (once).
-	 */
-	if (!poll_scheduled) {
-		for (chan = 0; chan < tx_channel_count; chan++) {
-			if (status[chan] & handle_tx) {
-				/* It doesn't matter what rx queue we choose
-				 * here. We use 0 since it always exists.
-				 */
-				struct stmmac_rx_queue *rx_q =
-					&priv->rx_queue[0];
-
-				if (likely(napi_schedule_prep(&rx_q->napi))) {
-					stmmac_disable_dma_irq(priv,
-							priv->ioaddr, chan);
-					__napi_schedule(&rx_q->napi);
-				}
-				break;
-			}
-		}
-	}
+		status[chan] = stmmac_napi_check(priv, chan);
 
 	for (chan = 0; chan < tx_channel_count; chan++) {
 		if (unlikely(status[chan] & tx_hard_error_bump_tc)) {
@@ -2211,6 +2204,13 @@ static int stmmac_init_dma_engine(struct
 	return ret;
 }
 
+static void stmmac_tx_timer_arm(struct stmmac_priv *priv, u32 queue)
+{
+	struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
+
+	mod_timer(&tx_q->txtimer, STMMAC_COAL_TIMER(priv->tx_coal_timer));
+}
+
 /**
  * stmmac_tx_timer - mitigation sw timer for tx.
  * @data: data pointer
@@ -2219,13 +2219,14 @@ static int stmmac_init_dma_engine(struct
  */
 static void stmmac_tx_timer(struct timer_list *t)
 {
-	struct stmmac_priv *priv = from_timer(priv, t, txtimer);
-	u32 tx_queues_count = priv->plat->tx_queues_to_use;
-	u32 queue;
+	struct stmmac_tx_queue *tx_q = from_timer(tx_q, t, txtimer);
+	struct stmmac_priv *priv = tx_q->priv_data;
+	struct stmmac_channel *ch;
 
-	/* let's scan all the tx queues */
-	for (queue = 0; queue < tx_queues_count; queue++)
-		stmmac_tx_clean(priv, queue);
+	ch = &priv->channel[tx_q->queue_index];
+
+	if (likely(napi_schedule_prep(&ch->napi)))
+		__napi_schedule(&ch->napi);
 }
 
 /**
@@ -2238,11 +2239,17 @@ static void stmmac_tx_timer(struct timer
  */
 static void stmmac_init_tx_coalesce(struct stmmac_priv *priv)
 {
+	u32 tx_channel_count = priv->plat->tx_queues_to_use;
+	u32 chan;
+
 	priv->tx_coal_frames = STMMAC_TX_FRAMES;
 	priv->tx_coal_timer = STMMAC_COAL_TX_TIMER;
-	timer_setup(&priv->txtimer, stmmac_tx_timer, 0);
-	priv->txtimer.expires = STMMAC_COAL_TIMER(priv->tx_coal_timer);
-	add_timer(&priv->txtimer);
+
+	for (chan = 0; chan < tx_channel_count; chan++) {
+		struct stmmac_tx_queue *tx_q = &priv->tx_queue[chan];
+
+		timer_setup(&tx_q->txtimer, stmmac_tx_timer, 0);
+	}
 }
 
 static void stmmac_set_rings_length(struct stmmac_priv *priv)
@@ -2570,6 +2577,7 @@ static void stmmac_hw_teardown(struct ne
 static int stmmac_open(struct net_device *dev)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
+	u32 chan;
 	int ret;
 
 	stmmac_check_ether_addr(priv);
@@ -2666,7 +2674,9 @@ irq_error:
 	if (dev->phydev)
 		phy_stop(dev->phydev);
 
-	del_timer_sync(&priv->txtimer);
+	for (chan = 0; chan < priv->plat->tx_queues_to_use; chan++)
+		del_timer_sync(&priv->tx_queue[chan].txtimer);
+
 	stmmac_hw_teardown(dev);
 init_error:
 	free_dma_desc_resources(priv);
@@ -2686,6 +2696,7 @@ dma_desc_error:
 static int stmmac_release(struct net_device *dev)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
+	u32 chan;
 
 	if (priv->eee_enabled)
 		del_timer_sync(&priv->eee_ctrl_timer);
@@ -2700,7 +2711,8 @@ static int stmmac_release(struct net_dev
 
 	stmmac_disable_all_queues(priv);
 
-	del_timer_sync(&priv->txtimer);
+	for (chan = 0; chan < priv->plat->tx_queues_to_use; chan++)
+		del_timer_sync(&priv->tx_queue[chan].txtimer);
 
 	/* Free the IRQ lines */
 	free_irq(dev->irq, dev);
@@ -2914,14 +2926,13 @@ static netdev_tx_t stmmac_tso_xmit(struc
 	priv->xstats.tx_tso_nfrags += nfrags;
 
 	/* Manage tx mitigation */
-	priv->tx_count_frames += nfrags + 1;
-	if (likely(priv->tx_coal_frames > priv->tx_count_frames)) {
-		mod_timer(&priv->txtimer,
-			  STMMAC_COAL_TIMER(priv->tx_coal_timer));
-	} else {
-		priv->tx_count_frames = 0;
+	tx_q->tx_count_frames += nfrags + 1;
+	if (priv->tx_coal_frames <= tx_q->tx_count_frames) {
 		stmmac_set_tx_ic(priv, desc);
 		priv->xstats.tx_set_ic_bit++;
+		tx_q->tx_count_frames = 0;
+	} else {
+		stmmac_tx_timer_arm(priv, queue);
 	}
 
 	skb_tx_timestamp(skb);
@@ -3125,14 +3136,13 @@ static netdev_tx_t stmmac_xmit(struct sk
 	 * This approach takes care about the fragments: desc is the first
 	 * element in case of no SG.
 	 */
-	priv->tx_count_frames += nfrags + 1;
-	if (likely(priv->tx_coal_frames > priv->tx_count_frames)) {
-		mod_timer(&priv->txtimer,
-			  STMMAC_COAL_TIMER(priv->tx_coal_timer));
-	} else {
-		priv->tx_count_frames = 0;
+	tx_q->tx_count_frames += nfrags + 1;
+	if (priv->tx_coal_frames <= tx_q->tx_count_frames) {
 		stmmac_set_tx_ic(priv, desc);
 		priv->xstats.tx_set_ic_bit++;
+		tx_q->tx_count_frames = 0;
+	} else {
+		stmmac_tx_timer_arm(priv, queue);
 	}
 
 	skb_tx_timestamp(skb);
@@ -3300,6 +3310,7 @@ static inline void stmmac_rx_refill(stru
 static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 {
 	struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
+	struct stmmac_channel *ch = &priv->channel[queue];
 	unsigned int entry = rx_q->cur_rx;
 	int coe = priv->hw->rx_csum;
 	unsigned int next_entry;
@@ -3469,7 +3480,7 @@ static int stmmac_rx(struct stmmac_priv
 			else
 				skb->ip_summed = CHECKSUM_UNNECESSARY;
 
-			napi_gro_receive(&rx_q->napi, skb);
+			napi_gro_receive(&ch->napi, skb);
 
 			priv->dev->stats.rx_packets++;
 			priv->dev->stats.rx_bytes += frame_len;
@@ -3492,27 +3503,33 @@ static int stmmac_rx(struct stmmac_priv
  *  Description :
  *  To look at the incoming frames and clear the tx resources.
  */
-static int stmmac_poll(struct napi_struct *napi, int budget)
+static int stmmac_napi_poll(struct napi_struct *napi, int budget)
 {
-	struct stmmac_rx_queue *rx_q =
-		container_of(napi, struct stmmac_rx_queue, napi);
-	struct stmmac_priv *priv = rx_q->priv_data;
-	u32 tx_count = priv->plat->tx_queues_to_use;
-	u32 chan = rx_q->queue_index;
-	int work_done = 0;
-	u32 queue;
+	struct stmmac_channel *ch =
+		container_of(napi, struct stmmac_channel, napi);
+	struct stmmac_priv *priv = ch->priv_data;
+	int work_done = 0, work_rem = budget;
+	u32 chan = ch->index;
 
 	priv->xstats.napi_poll++;
 
-	/* check all the queues */
-	for (queue = 0; queue < tx_count; queue++)
-		stmmac_tx_clean(priv, queue);
-
-	work_done = stmmac_rx(priv, budget, rx_q->queue_index);
-	if (work_done < budget) {
-		napi_complete_done(napi, work_done);
-		stmmac_enable_dma_irq(priv, priv->ioaddr, chan);
+	if (ch->has_tx) {
+		int done = stmmac_tx_clean(priv, work_rem, chan);
+
+		work_done += done;
+		work_rem -= done;
+	}
+
+	if (ch->has_rx) {
+		int done = stmmac_rx(priv, work_rem, chan);
+
+		work_done += done;
+		work_rem -= done;
 	}
+
+	if (work_done < budget && napi_complete_done(napi, work_done))
+		stmmac_enable_dma_irq(priv, priv->ioaddr, chan);
+
 	return work_done;
 }
 
@@ -4172,8 +4189,8 @@ int stmmac_dvr_probe(struct device *devi
 {
 	struct net_device *ndev = NULL;
 	struct stmmac_priv *priv;
+	u32 queue, maxq;
 	int ret = 0;
-	u32 queue;
 
 	ndev = alloc_etherdev_mqs(sizeof(struct stmmac_priv),
 				  MTL_MAX_TX_QUEUES,
@@ -4293,11 +4310,22 @@ int stmmac_dvr_probe(struct device *devi
 			 "Enable RX Mitigation via HW Watchdog Timer\n");
 	}
 
-	for (queue = 0; queue < priv->plat->rx_queues_to_use; queue++) {
-		struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
+	/* Setup channels NAPI */
+	maxq = max(priv->plat->rx_queues_to_use, priv->plat->tx_queues_to_use);
 
-		netif_napi_add(ndev, &rx_q->napi, stmmac_poll,
-			       (8 * priv->plat->rx_queues_to_use));
+	for (queue = 0; queue < maxq; queue++) {
+		struct stmmac_channel *ch = &priv->channel[queue];
+
+		ch->priv_data = priv;
+		ch->index = queue;
+
+		if (queue < priv->plat->rx_queues_to_use)
+			ch->has_rx = true;
+		if (queue < priv->plat->tx_queues_to_use)
+			ch->has_tx = true;
+
+		netif_napi_add(ndev, &ch->napi, stmmac_napi_poll,
+			       NAPI_POLL_WEIGHT);
 	}
 
 	mutex_init(&priv->lock);
@@ -4343,10 +4371,10 @@ error_netdev_register:
 	    priv->hw->pcs != STMMAC_PCS_RTBI)
 		stmmac_mdio_unregister(ndev);
 error_mdio_register:
-	for (queue = 0; queue < priv->plat->rx_queues_to_use; queue++) {
-		struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
+	for (queue = 0; queue < maxq; queue++) {
+		struct stmmac_channel *ch = &priv->channel[queue];
 
-		netif_napi_del(&rx_q->napi);
+		netif_napi_del(&ch->napi);
 	}
 error_hw_init:
 	destroy_workqueue(priv->wq);
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -30,6 +30,7 @@
 
 #define MTL_MAX_RX_QUEUES	8
 #define MTL_MAX_TX_QUEUES	8
+#define STMMAC_CH_MAX		8
 
 #define STMMAC_RX_COE_NONE	0
 #define STMMAC_RX_COE_TYPE1	1