Re: [PATCH RFC] doc: rcu: remove obsolete (non-)requirement about disabling preemption
From: Joel Fernandes
Date: Tue Oct 16 2018 - 16:41:28 EST
On Tue, Oct 16, 2018 at 04:26:11AM -0700, Paul E. McKenney wrote:
> On Mon, Oct 15, 2018 at 02:08:56PM -0700, Paul E. McKenney wrote:
> > On Mon, Oct 15, 2018 at 01:15:56PM -0700, Joel Fernandes wrote:
> > > On Mon, Oct 15, 2018 at 12:54:26PM -0700, Paul E. McKenney wrote:
> > > [...]
> > > > > > In any case, please don't spin for milliseconds with preemption disabled.
> > > > > > The real-time guys are unlikely to be happy with you if you do this!
> > > > >
> > > > > Well just to clarify, I was just running Oleg's test which did this. This
> > > > > test was mentioned in the original documentation that I deleted. Ofcourse I
> > > > > would not dare do such a thing in production code :-D. I guess to Oleg's
> > > > > defense, he did it to very that synchronize_rcu() was not blocked on
> > > > > preempt-disable sections which was a different test.
> > > >
> > > > Understood! Just pointing out that RCU's tolerating a given action does
> > > > not necessarily mean that it is a good idea to take that action. ;-)
> > >
> > > Makes sense :-) thanks.
> >
> > Don't worry, that won't happen again. ;-)
> >
> > > > > > > > + pr_crit("SPIN done!\n");
> > > > > > > > + preempt_enable();
> > > > > > > > + break;
> > > > > > > > + case 777:
> > > > > > > > + pr_crit("SYNC start\n");
> > > > > > > > + synchronize_rcu();
> > > > > > > > + pr_crit("SYNC done!\n");
> > > > > > >
> > > > > > > But you are using the console printing infrastructure which is rather
> > > > > > > heavyweight. Try replacing pr_* calls with trace_printk so that you
> > > > > > > write to the lock-free ring buffer, this will reduce the noise from the
> > > > > > > heavy console printing infrastructure.
> > > > > >
> > > > > > And this might be a problem as well.
> > > > >
> > > > > This was not the issue (or atleast not fully the issue) since I saw the same
> > > > > thing with trace_printk. It was exactly what you said - which is the
> > > > > excessively long preempt disabled times.
> > > >
> > > > One approach would be to apply this patch against (say) v4.18, which
> > > > does not have consolidated grace periods. You might then be able to
> > > > tell if the pr_crit() calls make any difference.
> > >
> > > I could do that, yeah. But since the original problem went away due to
> > > disabling preempts for a short while, I will move on and continue to focus on
> > > updating other parts of the documenation. Just to mention I
> > > brought this up because I thought its better to do that than not to, just
> > > incase there is any lurking issue with the consolidation. Sorry if that ended
> > > up with me being noisy.
> >
> > Not a problem, no need to apologize!
>
> Besides, digging through the code did point out a reasonable optimization.
> In the common case, this would buy 100s of microseconds rather than
> milliseconds, but it seems simple enough to be worthwhile. Thoughts?
Cool, thanks. One comment below:
> ------------------------------------------------------------------------
>
> commit 07921e8720907f58f82b142f2027fc56d5abdbfd
> Author: Paul E. McKenney <paulmck@xxxxxxxxxxxxx>
> Date: Tue Oct 16 04:12:58 2018 -0700
>
> rcu: Speed up expedited GPs when interrupting RCU reader
>
> In PREEMPT kernels, an expedited grace period might send an IPI to a
> CPU that is executing an RCU read-side critical section. In that case,
> it would be nice if the rcu_read_unlock() directly interacted with the
> RCU core code to immediately report the quiescent state. And this does
> happen in the case where the reader has been preempted. But it would
> also be a nice performance optimization if immediate reporting also
> happened in the preemption-free case.
>
> This commit therefore adds an ->exp_hint field to the task_struct structure's
> ->rcu_read_unlock_special field. The IPI handler sets this hint when
> it has interrupted an RCU read-side critical section, and this causes
> the outermost rcu_read_unlock() call to invoke rcu_read_unlock_special(),
> which, if preemption is enabled, reports the quiescent state immediately.
> If preemption is disabled, then the report is required to be deferred
> until preemption (or bottom halves or interrupts or whatever) is re-enabled.
>
> Because this is a hint, it does nothing for more complicated cases. For
> example, if the IPI interrupts an RCU reader, but interrupts are disabled
> across the rcu_read_unlock(), but another rcu_read_lock() is executed
> before interrupts are re-enabled, the hint will already have been cleared.
> If you do crazy things like this, reporting will be deferred until some
> later RCU_SOFTIRQ handler, context switch, cond_resched(), or similar.
>
> Reported-by: Joel Fernandes <joel@xxxxxxxxxxxxxxxxx>
> Signed-off-by: Paul E. McKenney <paulmck@xxxxxxxxxxxxx>
>
> diff --git a/include/linux/sched.h b/include/linux/sched.h
> index 004ca21f7e80..64ce751b5fe9 100644
> --- a/include/linux/sched.h
> +++ b/include/linux/sched.h
> @@ -571,8 +571,10 @@ union rcu_special {
> struct {
> u8 blocked;
> u8 need_qs;
> + u8 exp_hint; /* Hint for performance. */
> + u8 pad; /* No garbage from compiler! */
> } b; /* Bits. */
> - u16 s; /* Set of bits. */
> + u32 s; /* Set of bits. */
> };
>
> enum perf_event_task_context {
> diff --git a/kernel/rcu/tree_exp.h b/kernel/rcu/tree_exp.h
> index e669ccf3751b..928fe5893a57 100644
> --- a/kernel/rcu/tree_exp.h
> +++ b/kernel/rcu/tree_exp.h
> @@ -692,8 +692,10 @@ static void sync_rcu_exp_handler(void *unused)
> */
> if (t->rcu_read_lock_nesting > 0) {
> raw_spin_lock_irqsave_rcu_node(rnp, flags);
> - if (rnp->expmask & rdp->grpmask)
> + if (rnp->expmask & rdp->grpmask) {
> rdp->deferred_qs = true;
> + WRITE_ONCE(t->rcu_read_unlock_special.b.exp_hint, true);
> + }
> raw_spin_unlock_irqrestore_rcu_node(rnp, flags);
> }
>
> diff --git a/kernel/rcu/tree_plugin.h b/kernel/rcu/tree_plugin.h
> index 8b48bb7c224c..d6286eb6e77e 100644
> --- a/kernel/rcu/tree_plugin.h
> +++ b/kernel/rcu/tree_plugin.h
> @@ -643,8 +643,9 @@ static void rcu_read_unlock_special(struct task_struct *t)
> local_irq_save(flags);
> irqs_were_disabled = irqs_disabled_flags(flags);
> if ((preempt_bh_were_disabled || irqs_were_disabled) &&
> - t->rcu_read_unlock_special.b.blocked) {
> + t->rcu_read_unlock_special.s) {
> /* Need to defer quiescent state until everything is enabled. */
> + WRITE_ONCE(t->rcu_read_unlock_special.b.exp_hint, false);
> raise_softirq_irqoff(RCU_SOFTIRQ);
Still going through this patch, but it seems to me like the fact that
rcu_read_unlock_special is called means someone has requested for a grace
period. Then in that case, does it not make sense to raise the softirq
for processing anyway?
thanks,
- Joel