Re: [PATCH v2 00/21] PCI: Cleanup pci-keystone driver

[Lorenzo Pieralisi]

On Wed, Oct 17, 2018 at 01:10:53PM +0530, Kishon Vijay Abraham I wrote:
> The PCIe controller in AM654 uses Synopsys core revision 4.90a and uses
> the same TI wrapper as used in keystone2 with certain modification.
> Hence AM654 will use the same pci wrapper driver pci-keystone.c
> 
> In preparation for adding AM654 support, cleanup pci-keystone driver
> here.
> 
> Most of the cleanups here are trivial with major modification being
> merging pci-keystone-dw.c and pci-keystone.c
> 
> Cleaning-up irq handling in the RFC series is dropped here as it has
> few comments to be addressed.
> 
> Changes from v1:
> *) remove phy_reset in the cleanup PHY handling patch. It will be sent
>    while adding AM654 support
> *) Add a separate patch for using ERR_IRQ_STATUS instead of
>    ERR_IRQ_STATUS_RAW
> *) Split outbound window configuration into two patches. One which
>    gets the number of outbound windows from DT and the other cleansup
>    outbound window configuration.
> 
> Kishon Vijay Abraham I (21):
>   PCI: keystone: Use quirk to limit MRRS for K2G
>   PCI: keystone: Use quirk to set MRRS for PCI host bridge
>   PCI: keystone: Move dw_pcie_setup_rc out of ks_pcie_establish_link()
>   PCI: keystone: Do not initiate link training multiple times
>   PCI: keystone: Remove unused argument from ks_dw_pcie_host_init()
>   PCI: keystone: Merge pci-keystone-dw.c and pci-keystone.c
>   PCI: keystone: Remove redundant platform_set_drvdata
>   PCI: keystone: Use uniform function naming convention
>   dt-bindings: PCI: keystone: Add bindings to get device control module
>   PCI: keystone: Use syscon APIs to get device id from control module
>   PCI: keystone: Cleanup PHY handling
>   PCI: keystone: Invoke pm_runtime APIs to enable clock
>   PCI: keystone: Cleanup configuration space access
>   PCI: keystone: Get number of outbound windows from DT
>   PCI: keystone: Cleanup outbound window configuration
>   PCI: keystone: Cleanup set_dbi_mode and get_dbi_mode
>   PCI: keystone: Cleanup ks_pcie_link_up()
>   PCI: keystone: Use ERR_IRQ_STATUS instead of ERR_IRQ_STATUS_RAW to get
>     interrupt status
>   PCI: keystone: Add debug error message for all errors
>   PCI: keystone: Reorder header file in alphabetical order
>   PCI: keystone: Cleanup macros defined in pci-keystone.c
> 
>  .../devicetree/bindings/pci/pci-keystone.txt  |   3 +
>  MAINTAINERS                                   |   2 +-
>  drivers/pci/controller/dwc/Makefile           |   2 +-
>  drivers/pci/controller/dwc/pci-keystone-dw.c  | 484 -----------
>  drivers/pci/controller/dwc/pci-keystone.c     | 788 +++++++++++++++---
>  drivers/pci/controller/dwc/pci-keystone.h     |  57 --
>  drivers/pci/controller/dwc/pcie-designware.h  |   4 +
>  7 files changed, 686 insertions(+), 654 deletions(-)
>  delete mode 100644 drivers/pci/controller/dwc/pci-keystone-dw.c
>  delete mode 100644 drivers/pci/controller/dwc/pci-keystone.h

I have applied the series to pci/keystone, tentatively for v4.20.

Thanks,
Lorenzo