Re: [PATCHv2] reset: socfpga: add an early reset driver for SoCFPGA

From: Dinh Nguyen
Date: Wed Oct 17 2018 - 11:02:40 EST

Hi Philipp

On 10/17/2018 09:37 AM, Philipp Zabel wrote:
> Hi Dinh,
>
> On Thu, 2018-10-11 at 08:52 -0500, Dinh Nguyen wrote:
>> Create a separate reset driver that uses the reset operations in
>> reset-simple. The reset driver for the SoCFPGA platform needs to
>> register early in order to be able bring online timers that needed
>> early in the kernel bootup.
>>
>> We do not need this early reset driver for Stratix10, because on
>> arm64, Linux does not need the timers are that in reset. Linux is
>> able to run just fine with the internal armv8 timer.
>>
>> Signed-off-by: Dinh Nguyen <dinguyen@xxxxxxxxxx>
>> ---
>> v2: Do not build separate reset driver for STRATIX10
>> fix warning: symbol 'socfpga_reset_init' was not declared. Should
>> it be static?
>> ---
>> arch/arm/mach-socfpga/socfpga.c | 4 ++
>> drivers/reset/Kconfig | 9 +++-
>> drivers/reset/Makefile | 1 +
>> drivers/reset/reset-socfpga.c | 88 +++++++++++++++++++++++++++++++++
>> 4 files changed, 101 insertions(+), 1 deletion(-)
>> create mode 100644 drivers/reset/reset-socfpga.c
>>
>> diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
>> index dde14f7bf2c3..cc64576c102b 100644
>> --- a/arch/arm/mach-socfpga/socfpga.c
>> +++ b/arch/arm/mach-socfpga/socfpga.c
>> @@ -32,6 +32,8 @@ void __iomem *rst_manager_base_addr;
>> void __iomem *sdr_ctl_base_addr;
>> unsigned long socfpga_cpu1start_addr;
>>
>> +extern void __init socfpga_reset_init(void);
>> +
>> void __init socfpga_sysmgr_init(void)
>> {
>> struct device_node *np;
>> @@ -64,6 +66,7 @@ static void __init socfpga_init_irq(void)
>>
>> if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM))
>> socfpga_init_ocram_ecc();
>> + socfpga_reset_init();
>> }
>>
>> static void __init socfpga_arria10_init_irq(void)
>> @@ -74,6 +77,7 @@ static void __init socfpga_arria10_init_irq(void)
>> socfpga_init_arria10_l2_ecc();
>> if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM))
>> socfpga_init_arria10_ocram_ecc();
>> + socfpga_reset_init();
>> }
>>
>> static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd)
>> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
>> index 13d28fdbdbb5..f10de5ce4753 100644
>> --- a/drivers/reset/Kconfig
>> +++ b/drivers/reset/Kconfig
>> @@ -100,7 +100,7 @@ config RESET_QCOM_AOSS
>>
>> config RESET_SIMPLE
>> bool "Simple Reset Controller Driver" if COMPILE_TEST
>> - default ARCH_SOCFPGA || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED
>> + default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED
>> help
>> This enables a simple reset controller driver for reset lines that
>> that can be asserted and deasserted by toggling bits in a contiguous,
>> @@ -119,6 +119,13 @@ config RESET_STM32MP157
>> help
>> This enables the RCC reset controller driver for STM32 MPUs.
>>
>> +config RESET_SOCFPGA
>> + bool "SoCFPGA Reset Driver" if COMPILE_TEST && !ARCH_SOCFPGA
>> + default ARCH_SOCFPGA && !ARCH_STRATIX10
>> + select RESET_SIMPLE
>> + help
>> + This enables the reset driver for SoCFPGA.
>> +
>> config RESET_SUNXI
>> bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI
>> default ARCH_SUNXI
>> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
>> index 4243c38228e2..d09bb41273f6 100644
>> --- a/drivers/reset/Makefile
>> +++ b/drivers/reset/Makefile
>> @@ -18,6 +18,7 @@ obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
>> obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o
>> obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
>> obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o
>> +obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
>> obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
>> obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
>> obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
>> diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c
>> new file mode 100644
>> index 000000000000..b92769861d2b
>> --- /dev/null
>> +++ b/drivers/reset/reset-socfpga.c
>> @@ -0,0 +1,88 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) 2018, Intel Corporation
>> + * Copied from reset-sunxi.c
>> + */
>> +
>> +#include <linux/err.h>
>> +#include <linux/io.h>
>> +#include <linux/init.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/reset-controller.h>
>> +#include <linux/slab.h>
>> +#include <linux/spinlock.h>
>> +#include <linux/types.h>
>> +
>> +#include "reset-simple.h"
>> +
>> +#define SOCFPGA_NR_BANKS 8
>> +void __init socfpga_reset_init(void);
>> +
>> +static int a10_reset_init(struct device_node *np)
>> +{
>> + struct reset_simple_data *data;
>> + struct resource res;
>> + resource_size_t size;
>> + int ret;
>> + u32 reg_offset = 0x10;
>> +
>> + data = kzalloc(sizeof(*data), GFP_KERNEL);
>> + if (!data)
>> + return -ENOMEM;
>> +
>> + ret = of_address_to_resource(np, 0, &res);
>> + if (ret)
>> + goto err_alloc;
>> +
>> + size = resource_size(&res);
>> + if (!request_mem_region(res.start, size, np->name)) {
>> + ret = -EBUSY;
>> + goto err_alloc;
>> + }
>> +
>> + data->membase = ioremap(res.start, size);
>> + if (!data->membase) {
>> + ret = -ENOMEM;
>> + goto err_alloc;
>> + }
>> +
>> + if (of_property_read_u32(np, "altr,modrst-offset", &reg_offset))
>> + pr_warn("missing altr,modrst-offset property, assuming 0x10\n");
>> + data->membase += reg_offset;
>> +
>> + spin_lock_init(&data->lock);
>> +
>> + data->rcdev.owner = THIS_MODULE;
>> + data->rcdev.nr_resets = SOCFPGA_NR_BANKS * 32;
>> + data->rcdev.ops = &reset_simple_ops;
>> + data->rcdev.of_node = np;
>> + data->status_active_low = true;
>> +
>> + return reset_controller_register(&data->rcdev);
>> +
>> +err_alloc:
>> + kfree(data);
>> + return ret;
>> +};
>> +
>> +/*
>> + * These are the reset controller we need to initialize early on in
>> + * our system, before we can even think of using a regular device
>> + * driver for it.
>> + * The controllers that we can register through the regular device
>> + * model are handled by the simple reset driver directly.
>> + */
>> +static const struct of_device_id socfpga_early_reset_dt_ids[] __initconst = {
>> + { .compatible = "altr,rst-mgr", },
>
> That doesn't seem right. If you don't remove the altr,rst-mgr compatible
> from reset-simple.c anymore, we suddenly have two device drivers for the
> same compatible.

You're right, and that's why I am not building reset-simple for
ARCH_SOCFPGA anymore. I am only building reset-simple for ARCH_STRATIX10.

>
> (Also I liked removing altr,modrst-offset from reset-simple.c)

I can remove it since it's just 0x20 of ARCH_STRATIX10.

>
> Would there be any issue with calling socfpga_reset_init() on Stratix10
> as well?
>

I don't see any place in the arm64 common code where I can do this.

Dinh