[PATCH v2 12/17] thermal: exynos: enable+check sensor after its setup is finished

[Bartlomiej Zolnierkiewicz]

Enable sensor after doing chipset specific initialization operation and
check sensor after doing chipset specific control operation.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
---
 drivers/thermal/samsung/exynos_tmu.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 8ec74a62..796a868 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -1109,15 +1109,14 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 		goto err_sclk;
 	}
 
-	thermal_zone_set_mode(data->tzd, THERMAL_DEVICE_ENABLED);
-	thermal_zone_device_check(data->tzd);
-
 	ret = exynos_tmu_initialize(pdev);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to initialize TMU\n");
 		goto err_thermal;
 	}
 
+	thermal_zone_set_mode(data->tzd, THERMAL_DEVICE_ENABLED);
+
 	ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
 		IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data);
 	if (ret) {
@@ -1126,6 +1125,9 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 	}
 
 	exynos_tmu_control(pdev, true);
+
+	thermal_zone_device_check(data->tzd);
+
 	return 0;
 
 err_thermal:
-- 
1.9.1