Re: [PATCH RFC] doc: rcu: remove obsolete (non-)requirement about disabling preemption

From: Joel Fernandes
Date: Wed Oct 17 2018 - 14:15:13 EST


On Wed, Oct 17, 2018 at 09:11:00AM -0700, Paul E. McKenney wrote:
> On Tue, Oct 16, 2018 at 01:41:22PM -0700, Joel Fernandes wrote:
> > On Tue, Oct 16, 2018 at 04:26:11AM -0700, Paul E. McKenney wrote:
> > > On Mon, Oct 15, 2018 at 02:08:56PM -0700, Paul E. McKenney wrote:
> > > > On Mon, Oct 15, 2018 at 01:15:56PM -0700, Joel Fernandes wrote:
> > > > > On Mon, Oct 15, 2018 at 12:54:26PM -0700, Paul E. McKenney wrote:
> > > > > [...]
> > > > > > > > In any case, please don't spin for milliseconds with preemption disabled.
> > > > > > > > The real-time guys are unlikely to be happy with you if you do this!
> > > > > > >
> > > > > > > Well just to clarify, I was just running Oleg's test which did this. This
> > > > > > > test was mentioned in the original documentation that I deleted. Ofcourse I
> > > > > > > would not dare do such a thing in production code :-D. I guess to Oleg's
> > > > > > > defense, he did it to very that synchronize_rcu() was not blocked on
> > > > > > > preempt-disable sections which was a different test.
> > > > > >
> > > > > > Understood! Just pointing out that RCU's tolerating a given action does
> > > > > > not necessarily mean that it is a good idea to take that action. ;-)
> > > > >
> > > > > Makes sense :-) thanks.
> > > >
> > > > Don't worry, that won't happen again. ;-)
> > > >
> > > > > > > > > > + pr_crit("SPIN done!\n");
> > > > > > > > > > + preempt_enable();
> > > > > > > > > > + break;
> > > > > > > > > > + case 777:
> > > > > > > > > > + pr_crit("SYNC start\n");
> > > > > > > > > > + synchronize_rcu();
> > > > > > > > > > + pr_crit("SYNC done!\n");
> > > > > > > > >
> > > > > > > > > But you are using the console printing infrastructure which is rather
> > > > > > > > > heavyweight. Try replacing pr_* calls with trace_printk so that you
> > > > > > > > > write to the lock-free ring buffer, this will reduce the noise from the
> > > > > > > > > heavy console printing infrastructure.
> > > > > > > >
> > > > > > > > And this might be a problem as well.
> > > > > > >
> > > > > > > This was not the issue (or atleast not fully the issue) since I saw the same
> > > > > > > thing with trace_printk. It was exactly what you said - which is the
> > > > > > > excessively long preempt disabled times.
> > > > > >
> > > > > > One approach would be to apply this patch against (say) v4.18, which
> > > > > > does not have consolidated grace periods. You might then be able to
> > > > > > tell if the pr_crit() calls make any difference.
> > > > >
> > > > > I could do that, yeah. But since the original problem went away due to
> > > > > disabling preempts for a short while, I will move on and continue to focus on
> > > > > updating other parts of the documenation. Just to mention I
> > > > > brought this up because I thought its better to do that than not to, just
> > > > > incase there is any lurking issue with the consolidation. Sorry if that ended
> > > > > up with me being noisy.
> > > >
> > > > Not a problem, no need to apologize!
> > >
> > > Besides, digging through the code did point out a reasonable optimization.
> > > In the common case, this would buy 100s of microseconds rather than
> > > milliseconds, but it seems simple enough to be worthwhile. Thoughts?
> >
> > Cool, thanks. One comment below:
> >
> > > ------------------------------------------------------------------------
> > >
> > > commit 07921e8720907f58f82b142f2027fc56d5abdbfd
> > > Author: Paul E. McKenney <paulmck@xxxxxxxxxxxxx>
> > > Date: Tue Oct 16 04:12:58 2018 -0700
> > >
> > > rcu: Speed up expedited GPs when interrupting RCU reader
> > >
> > > In PREEMPT kernels, an expedited grace period might send an IPI to a
> > > CPU that is executing an RCU read-side critical section. In that case,
> > > it would be nice if the rcu_read_unlock() directly interacted with the
> > > RCU core code to immediately report the quiescent state. And this does
> > > happen in the case where the reader has been preempted. But it would
> > > also be a nice performance optimization if immediate reporting also
> > > happened in the preemption-free case.
> > >
> > > This commit therefore adds an ->exp_hint field to the task_struct structure's
> > > ->rcu_read_unlock_special field. The IPI handler sets this hint when
> > > it has interrupted an RCU read-side critical section, and this causes
> > > the outermost rcu_read_unlock() call to invoke rcu_read_unlock_special(),
> > > which, if preemption is enabled, reports the quiescent state immediately.
> > > If preemption is disabled, then the report is required to be deferred
> > > until preemption (or bottom halves or interrupts or whatever) is re-enabled.
> > >
> > > Because this is a hint, it does nothing for more complicated cases. For
> > > example, if the IPI interrupts an RCU reader, but interrupts are disabled
> > > across the rcu_read_unlock(), but another rcu_read_lock() is executed
> > > before interrupts are re-enabled, the hint will already have been cleared.
> > > If you do crazy things like this, reporting will be deferred until some
> > > later RCU_SOFTIRQ handler, context switch, cond_resched(), or similar.
> > >
> > > Reported-by: Joel Fernandes <joel@xxxxxxxxxxxxxxxxx>
> > > Signed-off-by: Paul E. McKenney <paulmck@xxxxxxxxxxxxx>
> > >
> > > diff --git a/include/linux/sched.h b/include/linux/sched.h
> > > index 004ca21f7e80..64ce751b5fe9 100644
> > > --- a/include/linux/sched.h
> > > +++ b/include/linux/sched.h
> > > @@ -571,8 +571,10 @@ union rcu_special {
> > > struct {
> > > u8 blocked;
> > > u8 need_qs;
> > > + u8 exp_hint; /* Hint for performance. */
> > > + u8 pad; /* No garbage from compiler! */
> > > } b; /* Bits. */
> > > - u16 s; /* Set of bits. */
> > > + u32 s; /* Set of bits. */
> > > };
> > >
> > > enum perf_event_task_context {
> > > diff --git a/kernel/rcu/tree_exp.h b/kernel/rcu/tree_exp.h
> > > index e669ccf3751b..928fe5893a57 100644
> > > --- a/kernel/rcu/tree_exp.h
> > > +++ b/kernel/rcu/tree_exp.h
> > > @@ -692,8 +692,10 @@ static void sync_rcu_exp_handler(void *unused)
> > > */
> > > if (t->rcu_read_lock_nesting > 0) {
> > > raw_spin_lock_irqsave_rcu_node(rnp, flags);
> > > - if (rnp->expmask & rdp->grpmask)
> > > + if (rnp->expmask & rdp->grpmask) {
> > > rdp->deferred_qs = true;
> > > + WRITE_ONCE(t->rcu_read_unlock_special.b.exp_hint, true);
> > > + }
> > > raw_spin_unlock_irqrestore_rcu_node(rnp, flags);
> > > }
> > >
> > > diff --git a/kernel/rcu/tree_plugin.h b/kernel/rcu/tree_plugin.h
> > > index 8b48bb7c224c..d6286eb6e77e 100644
> > > --- a/kernel/rcu/tree_plugin.h
> > > +++ b/kernel/rcu/tree_plugin.h
> > > @@ -643,8 +643,9 @@ static void rcu_read_unlock_special(struct task_struct *t)
> > > local_irq_save(flags);
> > > irqs_were_disabled = irqs_disabled_flags(flags);
> > > if ((preempt_bh_were_disabled || irqs_were_disabled) &&
> > > - t->rcu_read_unlock_special.b.blocked) {
> > > + t->rcu_read_unlock_special.s) {
> > > /* Need to defer quiescent state until everything is enabled. */
> > > + WRITE_ONCE(t->rcu_read_unlock_special.b.exp_hint, false);
> > > raise_softirq_irqoff(RCU_SOFTIRQ);
> >
> > Still going through this patch, but it seems to me like the fact that
> > rcu_read_unlock_special is called means someone has requested for a grace
> > period. Then in that case, does it not make sense to raise the softirq
> > for processing anyway?
>
> Not necessarily. Another reason that rcu_read_unlock_special() might
> be called is if the RCU read-side critical section had been preempted,
> in which case there might not even be a grace period in progress.

Yes true, it was at the back of my head ;) It needs to remove itself from the
blocked lists on the unlock. And ofcourse the preemption case is alsoo
clearly mentioned in this function's comments. (slaps self).

> In addition, if interrupts, bottom halves, and preemption are all enabled,
> the code in rcu_preempt_deferred_qs_irqrestore() doesn't need to bother
> raising softirq, as it can instead just immediately report the quiescent
> state.

Makes sense. I will go through these code paths more today. Thank you for the
explanations!

I think something like need_exp_qs instead of 'exp_hint' may be more
descriptive?

Otherwise,
Reviewed-by: Joel Fernandes <joel@xxxxxxxxxxxxxxxxx>

thanks,

- Joel