[PATCH 3/5] rtc: sc27xx: Remove interrupts disable and clear in probe()

[Baolin Wang]

When registering one rtc device, it will check to see if there is an
alarm already set in rtc hardware by issuing __rtc_read_alarm(). So
we should not disable the RTC interrupts and clear the interrupts
status in probe() function.

Signed-off-by: Baolin Wang <baolin.wang@xxxxxxxxxx>
---
 drivers/rtc/rtc-sc27xx.c |   20 --------------------
 1 file changed, 20 deletions(-)

diff --git a/drivers/rtc/rtc-sc27xx.c b/drivers/rtc/rtc-sc27xx.c
index 6ac5653..4ecabe6 100644
--- a/drivers/rtc/rtc-sc27xx.c
+++ b/drivers/rtc/rtc-sc27xx.c
@@ -129,19 +129,6 @@ static int sprd_rtc_clear_alarm_ints(struct sprd_rtc *rtc)
 			    SPRD_RTC_ALM_INT_MASK);
 }
 
-static int sprd_rtc_disable_ints(struct sprd_rtc *rtc)
-{
-	int ret;
-
-	ret = regmap_update_bits(rtc->regmap, rtc->base + SPRD_RTC_INT_EN,
-				 SPRD_RTC_INT_MASK, 0);
-	if (ret)
-		return ret;
-
-	return regmap_write(rtc->regmap, rtc->base + SPRD_RTC_INT_CLR,
-			    SPRD_RTC_INT_MASK);
-}
-
 static int sprd_rtc_lock_alarm(struct sprd_rtc *rtc, bool lock)
 {
 	int ret;
@@ -609,13 +596,6 @@ static int sprd_rtc_probe(struct platform_device *pdev)
 	rtc->dev = &pdev->dev;
 	platform_set_drvdata(pdev, rtc);
 
-	/* clear all RTC interrupts and disable all RTC interrupts */
-	ret = sprd_rtc_disable_ints(rtc);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to disable RTC interrupts\n");
-		return ret;
-	}
-
 	/* check if RTC time values are valid */
 	ret = sprd_rtc_check_power_down(rtc);
 	if (ret) {
-- 
1.7.9.5