[PATCH v3 7/7] ARM: tegra: apalis_t30: further regulator clean-up
From: Marcel Ziswiler
Date: Thu Oct 18 2018 - 07:15:04 EST
From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
Rename label vdd2_reg to reg_1v05.
Rename label ldo6_reg to reg_1v05_avdd_plle.
Drop unused labels.
Rename regulator tps62362-vout to +V1.2_VDD_CORE.
Reorder TPS65911 properties.
Rename +V1.05 to +V1.05_AVDD_PLLE.
Add ti,en-ck32k-xtal.
Specify TPS62362 vin-supply.
Drop spurious newline in TPS62362 properties.
Rename vddio_sdmmc_1v8_reg to reg_1v8_vddio_sdmmc3.
Rename +V1.05 to +V1.05_AVDD_PLLE.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
---
Changes in v3:
- Dropped ASoC patches in favour of sending them as a separate series.
Changes in v2:
- Dropped "[PATCH v1 3/8] ARM: tegra: apalis/colibri_t30: fix hdmi
regulator" as suggested by Russell et. al.
- Added 2 new patches improving/fixing audio on Apalis TK1.
Changes in v1: None
arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts | 2 +-
arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi | 70 +++++++++++---------------
arch/arm/boot/dts/tegra30-apalis.dtsi | 68 +++++++++++--------------
3 files changed, 58 insertions(+), 82 deletions(-)
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
index e29dca92ba0a..34c9fcd9198f 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
@@ -251,7 +251,7 @@
states = <1800000 0x0
3300000 0x1>;
startup-delay-us = <100000>;
- vin-supply = <&vddio_sdmmc_1v8_reg>;
+ vin-supply = <®_1v8_vddio_sdmmc3>;
};
};
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
index bc714032d771..fcfd3fddfda9 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
@@ -13,14 +13,14 @@
pcie@3000 {
status = "okay";
- avdd-pexa-supply = <&vdd2_reg>;
- avdd-pexb-supply = <&vdd2_reg>;
- avdd-pex-pll-supply = <&vdd2_reg>;
- avdd-plle-supply = <&ldo6_reg>;
+ avdd-pexa-supply = <®_1v05>;
+ avdd-pexb-supply = <®_1v05>;
+ avdd-pex-pll-supply = <®_1v05>;
+ avdd-plle-supply = <®_1v05>;
hvdd-pex-supply = <®_module_3v3>;
vddio-pex-ctl-supply = <®_module_3v3>;
- vdd-pexa-supply = <&vdd2_reg>;
- vdd-pexb-supply = <&vdd2_reg>;
+ vdd-pexa-supply = <®_1v05>;
+ vdd-pexb-supply = <®_1v05>;
/* Apalis type specific */
pci@1,0 {
@@ -864,16 +864,13 @@
pmic: pmic@2d {
compatible = "ti,tps65911";
reg = <0x2d>;
-
+ #gpio-cells = <2>;
+ gpio-controller;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
-
+ ti,en-ck32k-xtal;
ti,system-power-controller;
-
- #gpio-cells = <2>;
- gpio-controller;
-
vcc1-supply = <®_module_3v3>;
vcc2-supply = <®_module_3v3>;
vcc3-supply = <®_1v8_vio>;
@@ -884,38 +881,38 @@
vccio-supply = <®_module_3v3>;
regulators {
- vdd1_reg: vdd1 {
+ reg_1v8_vio: vio {
+ regulator-name = "+V1.8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vdd1 {
regulator-name = "+V1.35_VDDIO_DDR";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
};
- vdd2_reg: vdd2 {
+ reg_1v05: vdd2 {
regulator-name = "+V1.05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
- vddctrl_reg: vddctrl {
+ vddctrl {
regulator-name = "+V1.0_VDD_CPU";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
};
- reg_1v8_vio: vio {
- regulator-name = "+V1.8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
/*
* 1.8 volt +VDDIO_SDMMC3 in case EN_+3.3_SDMMC3
* is off
*/
- vddio_sdmmc_1v8_reg: ldo1 {
+ reg_1v8_vddio_sdmmc3: ldo1 {
regulator-name = "+VDDIO_SDMMC3_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -927,20 +924,20 @@
* +V3.3_AUDIO_AVDD_S, +V3.3
* see also +V3.3 fixed supply
*/
- ldo2_reg: ldo2 {
+ ldo2 {
regulator-name = "EN_+V3.3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- ldo3_reg: ldo3 {
+ ldo3 {
regulator-name = "+V1.2_CSI";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
- ldo4_reg: ldo4 {
+ ldo4 {
regulator-name = "+V1.2_VDD_RTC";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
@@ -951,32 +948,23 @@
* +V2.8_AVDD_VDAC:
* only required for (unsupported) analog RGB
*/
- ldo5_reg: ldo5 {
+ ldo5 {
regulator-name = "+V2.8_AVDD_VDAC";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
- /*
- * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
- * but LDO6 can't set voltage in 50mV
- * granularity
- */
- ldo6_reg: ldo6 {
- regulator-name = "+V1.05_AVDD_PLLE";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- };
+ /* LDO6: unused */
- ldo7_reg: ldo7 {
+ ldo7 {
regulator-name = "+V1.2_AVDD_PLL";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- ldo8_reg: ldo8 {
+ ldo8 {
regulator-name = "+V1.0_VDD_DDR_HS";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
@@ -1034,8 +1022,7 @@
regulator@60 {
compatible = "ti,tps62362";
reg = <0x60>;
-
- regulator-name = "tps62362-vout";
+ regulator-name = "+V1.2_VDD_CORE";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-boot-on;
@@ -1043,6 +1030,7 @@
ti,vsel0-state-low;
/* VSEL1: EN_CORE_DVFS_N low for DVFS */
ti,vsel1-state-low;
+ vin-supply =<®_module_3v3>;
};
};
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index 4b6a8ecaac76..d2b688d90223 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -12,14 +12,14 @@
pcie@3000 {
status = "okay";
- avdd-pexa-supply = <&vdd2_reg>;
- avdd-pexb-supply = <&vdd2_reg>;
- avdd-pex-pll-supply = <&vdd2_reg>;
- avdd-plle-supply = <&ldo6_reg>;
+ avdd-pexa-supply = <®_1v05>;
+ avdd-pexb-supply = <®_1v05>;
+ avdd-pex-pll-supply = <®_1v05>;
+ avdd-plle-supply = <®_1v05>;
hvdd-pex-supply = <®_module_3v3>;
vddio-pex-ctl-supply = <®_module_3v3>;
- vdd-pexa-supply = <&vdd2_reg>;
- vdd-pexb-supply = <&vdd2_reg>;
+ vdd-pexa-supply = <®_1v05>;
+ vdd-pexb-supply = <®_1v05>;
/* Apalis type specific */
pci@1,0 {
@@ -855,16 +855,13 @@
pmic: pmic@2d {
compatible = "ti,tps65911";
reg = <0x2d>;
-
+ #gpio-cells = <2>;
+ gpio-controller;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
-
+ ti,en-ck32k-xtal;
ti,system-power-controller;
-
- #gpio-cells = <2>;
- gpio-controller;
-
vcc1-supply = <®_module_3v3>;
vcc2-supply = <®_module_3v3>;
vcc3-supply = <®_1v8_vio>;
@@ -875,33 +872,33 @@
vccio-supply = <®_module_3v3>;
regulators {
- vdd1_reg: vdd1 {
+ reg_1v8_vio: vio {
+ regulator-name = "+V1.8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vdd1 {
regulator-name = "+V1.35_VDDIO_DDR";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
};
- vdd2_reg: vdd2 {
+ reg_1v05: vdd2 {
regulator-name = "+V1.05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
- vddctrl_reg: vddctrl {
+ vddctrl {
regulator-name = "+V1.0_VDD_CPU";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
};
- reg_1v8_vio: vio {
- regulator-name = "+V1.8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
/* LDO1: unused */
/*
@@ -909,20 +906,20 @@
* +V3.3_AUDIO_AVDD_S, +V3.3
* see also +V3.3 fixed supply
*/
- ldo2_reg: ldo2 {
+ ldo2 {
regulator-name = "EN_+V3.3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- ldo3_reg: ldo3 {
+ ldo3 {
regulator-name = "+V1.2_CSI";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
- ldo4_reg: ldo4 {
+ ldo4 {
regulator-name = "+V1.2_VDD_RTC";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
@@ -933,32 +930,23 @@
* +V2.8_AVDD_VDAC:
* only required for (unsupported) analog RGB
*/
- ldo5_reg: ldo5 {
+ ldo5 {
regulator-name = "+V2.8_AVDD_VDAC";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
- /*
- * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
- * but LDO6 can't set voltage in 50mV
- * granularity
- */
- ldo6_reg: ldo6 {
- regulator-name = "+V1.05_AVDD_PLLE";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- };
+ /* LDO6: unused */
- ldo7_reg: ldo7 {
+ ldo7 {
regulator-name = "+V1.2_AVDD_PLL";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- ldo8_reg: ldo8 {
+ ldo8 {
regulator-name = "+V1.0_VDD_DDR_HS";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
@@ -1016,8 +1004,7 @@
regulator@60 {
compatible = "ti,tps62362";
reg = <0x60>;
-
- regulator-name = "tps62362-vout";
+ regulator-name = "+V1.2_VDD_CORE";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-boot-on;
@@ -1025,6 +1012,7 @@
ti,vsel0-state-low;
/* VSEL1: EN_CORE_DVFS_N low for DVFS */
ti,vsel1-state-low;
+ vin-supply =<®_module_3v3>;
};
};
--
2.14.4