[PATCH] net: ethernet: fec: Add missing SPEED_

[Corentin Labbe]

Since commit 58056c1e1b0e ("net: ethernet: Use phy_set_max_speed() to limit advertised speed"), the fec driver is unable to get any link.
This is due to missing SPEED_.

Fixes: 58056c1e1b0e ("net: ethernet: Use phy_set_max_speed() to limit advertised speed")
Signed-off-by: Corentin Labbe <clabbe@xxxxxxxxxxxx>
---
 drivers/net/ethernet/freescale/fec_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index a17cc97..75fd7c9 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1946,7 +1946,7 @@ static int fec_enet_mii_probe(struct net_device *ndev)
 
 	/* mask with MAC supported features */
 	if (fep->quirks & FEC_QUIRK_HAS_GBIT) {
-		phy_set_max_speed(phy_dev, 1000);
+		phy_set_max_speed(phy_dev, SPEED_1000);
 		phy_remove_link_mode(phy_dev,
 				     ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
 #if !defined(CONFIG_M5272)
@@ -1954,7 +1954,7 @@ static int fec_enet_mii_probe(struct net_device *ndev)
 #endif
 	}
 	else
-		phy_set_max_speed(phy_dev, 100);
+		phy_set_max_speed(phy_dev, SPEED_100);
 
 	fep->link = 0;
 	fep->full_duplex = 0;
-- 
2.7.4