Re: [PATCH] ata: add Buddha PATA controller driver

[Michael Schmitz]

Hi Bartlomiej,

On 19/10/18 01:29, Bartlomiej Zolnierkiewicz wrote:
> Add Buddha PATA controller driver. It enables libata support for
> the Buddha, Catweasel and X-Surf expansion boards on the Zorro
> expansion bus.
>
> Cc: John Paul Adrian Glaubitz <glaubitz@xxxxxxxxxxxxxxxxxxx>
> Cc: Michael Schmitz <schmitzmic@xxxxxxxxx>
> Cc: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
> ---
> John, please test if possible..
>
>   drivers/ata/Kconfig       |   12 ++
>   drivers/ata/Makefile      |    1
>   drivers/ata/pata_buddha.c |  257 ++++++++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 270 insertions(+)
>
> Index: b/drivers/ata/Kconfig
> ===================================================================
> --- a/drivers/ata/Kconfig	2018-10-18 14:18:02.766452406 +0200
> +++ b/drivers/ata/Kconfig	2018-10-18 14:18:02.766452406 +0200
> @@ -965,6 +965,18 @@ config PATA_GAYLE
>   
>   	  If unsure, say N.
>   
> +config PATA_BUDDHA
> +	tristate "Buddha/Catweasel/X-Surf PATA support"
> +	depends on ZORRO
> +	help
> +	  This option enables support for the IDE interfaces
> +	  on the Buddha, Catweasel and X-Surf expansion boards
> +	  on the Zorro expansion bus. It supports up to two
> +	  interfaces on the Buddha, three on the Catweasel and
> +	  two on the X-Surf.
> +
> +	  If unsure, say N.
> +
>   config PATA_ISAPNP
>   	tristate "ISA Plug and Play PATA support"
>   	depends on ISAPNP
> Index: b/drivers/ata/Makefile
> ===================================================================
> --- a/drivers/ata/Makefile	2018-10-18 14:18:02.766452406 +0200
> +++ b/drivers/ata/Makefile	2018-10-18 14:18:02.766452406 +0200
> @@ -98,6 +98,7 @@ obj-$(CONFIG_PATA_WINBOND)	+= pata_sl82c
>   obj-$(CONFIG_PATA_CMD640_PCI)	+= pata_cmd640.o
>   obj-$(CONFIG_PATA_FALCON)	+= pata_falcon.o
>   obj-$(CONFIG_PATA_GAYLE)	+= pata_gayle.o
> +obj-$(CONFIG_PATA_BUDDHA)	+= pata_buddha.o
>   obj-$(CONFIG_PATA_ISAPNP)	+= pata_isapnp.o
>   obj-$(CONFIG_PATA_IXP4XX_CF)	+= pata_ixp4xx_cf.o
>   obj-$(CONFIG_PATA_MPIIX)	+= pata_mpiix.o
> Index: b/drivers/ata/pata_buddha.c
> ===================================================================
> --- /dev/null	1970-01-01 00:00:00.000000000 +0000
> +++ b/drivers/ata/pata_buddha.c	2018-10-18 14:23:41.054460925 +0200
> @@ -0,0 +1,257 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +/*
> + * Buddha, Catweasel and X-Surf PATA controller driver
> + *
> + * Copyright (c) 2018 Samsung Electronics Co., Ltd.
> + *		http://www.samsung.com
> + *
> + * Based on buddha.c:
> + *
> + *	Copyright (C) 1997, 2001 by Geert Uytterhoeven and others
> + */
> +
> +#include <linux/ata.h>
> +#include <linux/blkdev.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/libata.h>
> +#include <linux/mm.h>
> +#include <linux/module.h>
> +#include <linux/zorro.h>
> +#include <scsi/scsi_cmnd.h>
> +#include <scsi/scsi_host.h>
> +
> +#include <asm/amigahw.h>
> +#include <asm/amigaints.h>
> +#include <asm/ide.h>
> +#include <asm/setup.h>
> +
> +#define DRV_NAME "pata_buddha"
> +#define DRV_VERSION "0.1.0"
> +
> +#define BUDDHA_BASE1	0x800
> +#define BUDDHA_BASE2	0xa00
> +#define BUDDHA_BASE3	0xc00
> +#define XSURF_BASE1	0xb000 /* 2.5" interface */
> +#define XSURF_BASE2	0xd000 /* 3.5" interface */
> +#define BUDDHA_CONTROL	0x11a
> +#define BUDDHA_IRQ	0xf00
> +#define XSURF_IRQ	0x7e
> +#define BUDDHA_IRQ_MR	0xfc0	/* master interrupt enable */
> +
> +enum {
> +	BOARD_BUDDHA = 0,
> +	BOARD_CATWEASEL,
> +	BOARD_XSURF
> +};
> +
> +static unsigned int buddha_bases[3] __initdata = {
> +	BUDDHA_BASE1, BUDDHA_BASE2, BUDDHA_BASE3
> +};
> +
> +static unsigned int xsurf_bases[2] __initdata = {
> +	XSURF_BASE1, XSURF_BASE2
> +};
> +
> +static struct scsi_host_template pata_buddha_sht = {
> +	ATA_PIO_SHT(DRV_NAME),
> +};
> +
> +/* FIXME: is this needed? */
> +static unsigned int pata_buddha_data_xfer(struct ata_queued_cmd *qc,
> +					 unsigned char *buf,
> +					 unsigned int buflen, int rw)
> +{
> +	struct ata_device *dev = qc->dev;
> +	struct ata_port *ap = dev->link->ap;
> +	void __iomem *data_addr = ap->ioaddr.data_addr;
> +	unsigned int words = buflen >> 1;
> +
> +	/* Transfer multiple of 2 bytes */
> +	if (rw == READ)
> +		raw_insw((u16 *)data_addr, (u16 *)buf, words);
> +	else
> +		raw_outsw((u16 *)data_addr, (u16 *)buf, words);
> +
> +	/* Transfer trailing byte, if any. */
> +	if (unlikely(buflen & 0x01)) {
> +		unsigned char pad[2] = { };
> +
> +		/* Point buf to the tail of buffer */
> +		buf += buflen - 1;
> +
> +		if (rw == READ) {
> +			raw_insw((u16 *)data_addr, (u16 *)pad, 1);
> +			*buf = pad[0];
> +		} else {
> +			pad[0] = *buf;
> +			raw_outsw((u16 *)data_addr, (u16 *)pad, 1);
> +		}
> +		words++;
> +	}
> +
> +	return words << 1;
> +}
> +
> +/*
> + * Provide our own set_mode() as we don't want to change anything that has
> + * already been configured..
> + */
> +static int pata_buddha_set_mode(struct ata_link *link,
> +				struct ata_device **unused)
> +{
> +	struct ata_device *dev;
> +
> +	ata_for_each_dev(dev, link, ENABLED) {
> +		/* We don't really care */
> +		dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
> +		dev->xfer_shift = ATA_SHIFT_PIO;
> +		dev->flags |= ATA_DFLAG_PIO;
> +		ata_dev_info(dev, "configured for PIO\n");
> +	}
> +	return 0;
> +}
> +
> +static bool pata_buddha_irq_check(struct ata_port *ap)
> +{
> +	u8 ch;
> +
> +	ch = z_readb((unsigned long)ap->private_data);
> +
> +	return !!(ch & 0x80);
> +}
> +
> +static void pata_xsurf_irq_clear(struct ata_port *ap)
> +{
> +	z_writeb(0, (unsigned long)ap->private_data);
> +}
> +
> +static struct ata_port_operations pata_buddha_ops = {
> +	.inherits	= &ata_sff_port_ops,
> +	.sff_data_xfer	= pata_buddha_data_xfer,
> +	.sff_irq_check	= pata_buddha_irq_check,
> +	.cable_detect	= ata_cable_unknown,
> +	.set_mode	= pata_buddha_set_mode,
> +};
> +
> +static struct ata_port_operations pata_xsurf_ops = {
> +	.inherits	= &ata_sff_port_ops,
> +	.sff_data_xfer	= pata_buddha_data_xfer,
> +	.sff_irq_check	= pata_buddha_irq_check,
> +	.sff_irq_clear	= pata_xsurf_irq_clear,
> +	.cable_detect	= ata_cable_unknown,
> +	.set_mode	= pata_buddha_set_mode,
> +};
> +
> +static int __init pata_buddha_init_one(void)

That's a misnomer - it'll pick up _all_ devices matching the search 
criteria below:

> +{
> +	struct zorro_dev *z = NULL;
> +
> +	while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {

All Zorro devices ...
> +		static const char *board_name[]
> +			= { "Buddha", "Catweasel", "X-Surf" };
> +		struct ata_host *host;
> +		void __iomem *buddha_board;
> +		unsigned long board;
> +		unsigned int type, nr_ports = 2;
> +		int i;
> +
> +		if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
> +			type = BOARD_BUDDHA;
> +		} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL) {
> +			type = BOARD_CATWEASEL;
> +			nr_ports++;
> +		} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF) {
> +			type = BOARD_XSURF;

matching these three board IDs.

> +		} else
> +			continue;
> +
> +		dev_info(&z->dev, "%s IDE controller\n", board_name[type]);
> +
> +		board = z->resource.start;
> +
> +		if (type != BOARD_XSURF) {
> +			if (!devm_request_mem_region(&z->dev,
> +						     board + BUDDHA_BASE1,
> +						     0x800, DRV_NAME))
> +				continue;
> +		} else {
> +			if (!devm_request_mem_region(&z->dev,
> +						     board + XSURF_BASE1,
> +						     0x1000, DRV_NAME))
> +				continue;
> +			if (!devm_request_mem_region(&z->dev,
> +						     board + XSURF_BASE2,
> +						     0x1000, DRV_NAME))
> +				continue;
> +		}
> +
> +		/* allocate host */
> +		host = ata_host_alloc(&z->dev, nr_ports);
> +		if (!host)
> +			continue;
> +
> +		buddha_board = ZTWO_VADDR(board);
> +
> +		/* enable the board IRQ on Buddha/Catweasel */
> +		if (type != BOARD_XSURF)
> +			z_writeb(0, buddha_board + BUDDHA_IRQ_MR);
> +
> +		for (i = 0; i < nr_ports; i++) {
> +			struct ata_port *ap = host->ports[i];
> +			void __iomem *base, *irqport;
> +			unsigned long ctl = 0;
> +
> +			if (type != BOARD_XSURF) {
> +				ap->ops = &pata_buddha_ops;
> +				base = buddha_board + buddha_bases[i];
> +				ctl = BUDDHA_CONTROL;
> +				irqport = buddha_board + BUDDHA_IRQ + i * 0x40;
> +			} else {
> +				ap->ops = &pata_xsurf_ops;
> +				base = buddha_board + xsurf_bases[i];
> +				/* X-Surf has no CS1* (Control/AltStat) */
> +				irqport = buddha_board + XSURF_IRQ;
> +			}
> +
> +			ap->pio_mask = ATA_PIO4;
> +			ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
> +
> +			ap->ioaddr.data_addr		= base;
> +			ap->ioaddr.error_addr		= base + 2 + 1 * 4;
> +			ap->ioaddr.feature_addr		= base + 2 + 1 * 4;
> +			ap->ioaddr.nsect_addr		= base + 2 + 2 * 4;
> +			ap->ioaddr.lbal_addr		= base + 2 + 3 * 4;
> +			ap->ioaddr.lbam_addr		= base + 2 + 4 * 4;
> +			ap->ioaddr.lbah_addr		= base + 2 + 5 * 4;
> +			ap->ioaddr.device_addr		= base + 2 + 6 * 4;
> +			ap->ioaddr.status_addr		= base + 2 + 7 * 4;
> +			ap->ioaddr.command_addr		= base + 2 + 7 * 4;
> +
> +			if (ctl) {
> +				ap->ioaddr.altstatus_addr = base + ctl;
> +				ap->ioaddr.ctl_addr	  = base + ctl;
> +			}
> +
> +			ap->private_data = (void *)irqport;
> +
> +			ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", board,
> +				      ctl ? board + buddha_bases[i] + ctl : 0);
> +		}
> +
> +		ata_host_activate(host, IRQ_AMIGA_PORTS, ata_sff_interrupt,
> +				  IRQF_SHARED, &pata_buddha_sht);
> +
> +	}
> +
> +	return 0;
> +}
> +
> +module_init(pata_buddha_init_one);
> +
> +MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
> +MODULE_DESCRIPTION("low-level driver for Buddha/Catweasel/X-Surf PATA");
> +MODULE_LICENSE("GPL v2");
> +MODULE_VERSION(DRV_VERSION);
No module_exit().

Untested (stolen from pata_legacy.c):

commit 66a85e7f93a0144b2542b6c9944f5fb726b04662
Author: Michael Schmitz <schmitzmic@xxxxxxxxx>
Date:ÂÂ Fri Oct 19 12:31:57 2018 +1300

ÂÂÂ ata: pata_buddha - add module_exit()

ÂÂÂ Note ata hosts as we probe, and use those in forgotten 
module_exit() later.

ÂÂÂ Signed-off-by: Michael Schmitz <schmitzmic@xxxxxxxxx>

diff --git a/drivers/ata/pata_buddha.c b/drivers/ata/pata_buddha.c
index 11a8044..39582c0 100644
--- a/drivers/ata/pata_buddha.c
+++ b/drivers/ata/pata_buddha.c
@@ -59,6 +59,10 @@ enum {
ÂÂÂÂÂÂÂ ATA_PIO_SHT(DRV_NAME),
Â};

+#define NR_HOST 6
+static struct ata_host *buddha_host[NR_HOST];
+static int nr_buddha_host;
+
Â/* FIXME: is this needed? */
Âstatic unsigned int pata_buddha_data_xfer(struct ata_queued_cmd *qc,
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ unsigned char *buf,
@@ -244,6 +248,7 @@ static int __init pata_buddha_init_one(void)
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ ata_host_activate(host, IRQ_AMIGA_PORTS, ata_sff_interrupt,
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ IRQF_SHARED, &pata_buddha_sht);

+ÂÂÂÂÂÂÂÂÂÂÂÂÂÂ buddha_host[nr_buddha_host++] = host;
ÂÂÂÂÂÂÂ }

ÂÂÂÂÂÂÂ return 0;
@@ -251,6 +256,16 @@ static int __init pata_buddha_init_one(void)

Âmodule_init(pata_buddha_init_one);

+static __exit void pata_buddha_exit_one(void)
+{
+ÂÂÂÂÂÂ int i;
+
+ÂÂÂÂÂÂ for (i = 0; i < nr_buddha_host; i++)
+ÂÂÂÂÂÂÂÂÂÂÂÂÂÂ ata_host_detach(buddha_host[i]);
+}
+
+module_exit(pata_buddha_exit_one);
+

Cheers,

ÂÂÂ Michael