Re: [PATCH v5 2/2] mtd: rawnand: meson: add support for Amlogic NAND flash controller

[Liang Yang]

On 2018/10/19 4:50, Boris Brezillon wrote:
> On Thu, 18 Oct 2018 13:09:05 +0800
> Jianxin Pan <jianxin.pan@xxxxxxxxxxx> wrote:
>
> > +static int meson_nfc_buffer_init(struct mtd_info *mtd)
> > +{
> > +	struct nand_chip *nand = mtd_to_nand(mtd);
> > +	struct meson_nfc *nfc = nand_get_controller_data(nand);
> > +	static int max_page_bytes, max_info_bytes;
> > +	int page_bytes, info_bytes;
> > +	int nsectors;
> > +
> > +	nsectors = mtd->writesize / nand->ecc.size;
> > +	page_bytes =  mtd->writesize + mtd->oobsize;
> > +	info_bytes = nsectors * PER_INFO_BYTE;
> > +
> > +	if (nfc->data_buf && nfc->info_buf) {
> > +		if (max_page_bytes < page_bytes)
> > +			meson_nfc_free_buffer(nfc);
> > +		else
> > +			return 0;
> > +	}
> > +
> > +	max_page_bytes = max_t(int, max_page_bytes, page_bytes);
> > +	max_info_bytes = max_t(int, max_info_bytes, info_bytes);
> > +
> > +	nfc->data_buf = kmalloc(max_page_bytes, GFP_KERNEL);
>
> Is there a good reason for not using chip->data_buf and allocating a
> new buffer here?
when calling read_oob or write_oob, i need a mid-buffer which is used in 
meson_nfc_prase_data_oob(). i.e. after reading a page data into 
nfc->data_buf, I will format it and transfer to chip->data_buf.


> > +	if (!nfc->data_buf)
> > +		return -ENOMEM;
> > +
> > +	nfc->info_buf = kmalloc(max_info_bytes, GFP_KERNEL);
> > +	if (!nfc->info_buf) {
> > +		kfree(nfc->data_buf);
> > +		return -ENOMEM;
> > +	}
>
> I'd recommend moving this info_buf in the priv chip struct, otherwise
> you'll have to protect nfc->info_buf with a lock to prevent an already
> register chip from using this pointer while you're reallocating the
> buffer. Also, I think you have a memleak here.
ok, i will move it in the chip struct .

but how memleak happens even i have called meson_nfc_free_buffer before 
and free data_buf if info_buf alloc faied.

> > +
> > +	return 0;
> > +}
>
> .