[PATCH] ASoC: dt-bindings: add mclk provider support to stm32 sai

From: Olivier Moysan
Date: Mon Oct 15 2018 - 10:03:33 EST


add mclk provider support to stm32 sai

Signed-off-by: Olivier Moysan <olivier.moysan@xxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
Documentation/devicetree/bindings/sound/st,stm32-sai.txt | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
index 3a3fc506e43a..3f4467ff0aa2 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
@@ -31,7 +31,11 @@ SAI subnodes required properties:
- reg: Base address and size of SAI sub-block register set.
- clocks: Must contain one phandle and clock specifier pair
for sai_ck which feeds the internal clock generator.
+ If the SAI shares a master clock, with another SAI set as MCLK
+ clock provider, SAI provider phandle must be specified here.
- clock-names: Must contain "sai_ck".
+ Must also contain "MCLK", if SAI shares a master clock,
+ with a SAI set as MCLK clock provider.
- dmas: see Documentation/devicetree/bindings/dma/stm32-dma.txt
- dma-names: identifier string for each DMA request line
"tx": if sai sub-block is configured as playback DAI
@@ -51,6 +55,9 @@ SAI subnodes Optional properties:
configured according to protocol defined in related DAI link node,
such as i2s, left justified, right justified, dsp and pdm protocols.
Note: ac97 protocol is not supported by SAI driver
+ - #clock-cells: should be 0. This property must be present if the SAI device
+ is a master clock provider, according to clocks bindings, described in
+ Documentation/devicetree/bindings/clock/clock-bindings.txt.

The device node should contain one 'port' child node with one child 'endpoint'
node, according to the bindings defined in Documentation/devicetree/bindings/
--
2.19.0.rc2