Re: [PATCH v2 3/3] pinctrl: upboard: Add UP2 pinctrl and gpio driver
From: Andy Shevchenko
Date: Sat Oct 20 2018 - 07:44:02 EST
On Fri, Oct 19, 2018 at 8:24 PM Dan O'Donovan <dan@xxxxxxxxxx> wrote:
>
> From: Javier Arteaga <javier@xxxxxxxxxx>
>
> The UP2 board features a Raspberry Pi compatible pin header (HAT) and a
> board-specific expansion connector (EXHAT). Both expose assorted
> functions from either the SoC (such as GPIO, I2C, SPI, UART...) or other
> on-board devices (ADC, FPGA IP blocks...).
>
> These lines are routed through an on-board FPGA. The platform controller
> in its stock firmware provides register fields to change:
>
> - Line enable (FPGA pins enabled / high impedance)
> - Line direction (SoC driven / FPGA driven)
>
> To enable using SoC GPIOs on the pin header, this arrangement requires
> both configuring the platform controller, and updating the SoC pad
> registers in sync.
>
> Add a frontend pinctrl/GPIO driver that registers a new set of GPIO
> lines for the header pins. When these are requested, the driver
> propagates this request to the backend SoC pinctrl/GPIO driver by
> grabbing a GPIO descriptor for the matching SoC GPIO line. The needed
> mapping for this is retrieved via ACPI properties.
To Linus: please, don't consider this as anyhow part of Intel pin
control infrastructure. Thus, if you are okay with the driver
(personally I don't see any major issues with the code, though it
might be required some clarification on design level, e.g. ACPI
relationship) I have no objection.
> +#define UPBOARD_BIT_TO_PIN(r, bit) \
> + ((r) * UPBOARD_REGISTER_SIZE + (bit))
One line?
> +static int upboard_get_functions_count(struct pinctrl_dev *pctldev)
> +{
> + return 0;
> +}
> +
> +static int upboard_get_function_groups(struct pinctrl_dev *pctldev,
> + unsigned int selector,
> + const char * const **groups,
> + unsigned int *num_groups)
> +{
> + *groups = NULL;
> + *num_groups = 0;
> + return 0;
> +}
> +
> +static const char *upboard_get_function_name(struct pinctrl_dev *pctldev,
> + unsigned int selector)
> +{
> + return NULL;
> +}
> +
> +static int upboard_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
> + unsigned int group)
> +{
> + return 0;
> +}
Hmm... Do you need those stubs? Same Q for other stubs in the file.
> +static int upboard_gpio_request_enable(struct pinctrl_dev *pctldev,
> + struct pinctrl_gpio_range *range,
> + unsigned int pin)
> +{
> + const struct pin_desc * const pd = pin_desc_get(pctldev, pin);
> + const struct upboard_pin *p;
> + int ret;
> +
> + if (!pd)
> + return -EINVAL;
When it possible to happen?
Same Q for the rest same excerpts.
> + p = pd->drv_data;
> +
> + /* if this pin has an associated function bit, disable it first */
> + if (p->func_en) {
> + ret = regmap_field_write(p->func_en, 0);
> + if (ret)
> + return ret;
> + }
> +
> + if (p->gpio_en) {
> + ret = regmap_field_write(p->gpio_en, 1);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +static struct gpio_desc *upboard_offset_to_soc_gpio(struct gpio_chip *gc,
> + unsigned int offset)
> +{
> + struct upboard_pinctrl *pctrl =
> + container_of(gc, struct upboard_pinctrl, chip);
One line?
> +
> + if (offset + 1 > pctrl->nsoc_gpios || !pctrl->soc_gpios[offset])
> + return ERR_PTR(-ENODEV);
offset >= ?
Is it even possible?
> +
> + return pctrl->soc_gpios[offset];
> +}
> +
> +static int upboard_gpio_request(struct gpio_chip *gc, unsigned int offset)
> +{
> + struct upboard_pinctrl *pctrl =
> + container_of(gc, struct upboard_pinctrl, chip);
One line?
> +}
> +
> +static void upboard_gpio_free(struct gpio_chip *gc, unsigned int offset)
> +{
> + struct upboard_pinctrl *pctrl =
> + container_of(gc, struct upboard_pinctrl, chip);
Ditto.
> + if (offset + 1 > pctrl->nsoc_gpios || !pctrl->soc_gpios[offset])
> + return;
offset >= ?
Is it even possible?
> +}
> +static int upboard_pinctrl_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct pinctrl_desc *pctldesc;
> + struct upboard_pinctrl *pctrl;
> + struct upboard_pin *pins;
> + struct acpi_device *adev;
> + struct regmap *regmap;
> + unsigned int i;
> + int ret;
> + adev = ACPI_COMPANION(dev);
> + if (!adev || strcmp(acpi_device_hid(adev), "AANT0F01"))
> + return -ENODEV;
Same Q as per LED driver.
> + for (i = 0; i < pctldesc->npins; i++) {
> + struct upboard_pin *pin = &pins[i];
> + const struct pinctrl_pin_desc *pd = &pctldesc->pins[i];
> + pin->func_en = NULL;
Useless.
> + if (pd->drv_data) {
> + struct reg_field *field = pd->drv_data;
> +
> + pin->func_en = devm_regmap_field_alloc(dev, regmap,
> + *field);
> + if (IS_ERR(pin->func_en))
> + return PTR_ERR(pin->func_en);
> + }
> +
> + pin->gpio_en = upboard_field_alloc(dev, regmap,
> + UPBOARD_REG_GPIO_EN0, i);
> + if (IS_ERR(pin->gpio_en))
> + return PTR_ERR(pin->gpio_en);
> +
> + pin->gpio_dir = upboard_field_alloc(dev, regmap,
> + UPBOARD_REG_GPIO_DIR0, i);
> + if (IS_ERR(pin->gpio_dir))
> + return PTR_ERR(pin->gpio_dir);
> +
> + ((struct pinctrl_pin_desc *)pd)->drv_data = pin;
I'm not sure I understand the purpose of this casting.
> + }
> + pctrl->soc_gpios = devm_kzalloc(dev,
> + pctrl->nsoc_gpios * sizeof(*pctrl->soc_gpios),
> + GFP_KERNEL);
> + if (!pctrl->soc_gpios)
> + return -ENOMEM;
kzalloc -> kcalloc
> +}
--
With Best Regards,
Andy Shevchenko