[PATCH v2 2/2] usb: xhci: fix timeout for transition from RExit to U0

[Aaron Ma]

This definition is used by msecs_to_jiffies in milliseconds.
According to the comments, max rexit timeout should be 20ms.
Align with the comments to properly calculate the delay.

Verified on Sunrise Point-LP and Cannon Lake.

Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Aaron Ma <aaron.ma@xxxxxxxxxxxxx>
---
 drivers/usb/host/xhci-hub.c | 4 ++--
 drivers/usb/host/xhci.h     | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 56a08daa7431..af168ada8f86 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -920,7 +920,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
 			time_left = wait_for_completion_timeout(
 					&bus_state->rexit_done[wIndex],
 					msecs_to_jiffies(
-						XHCI_MAX_REXIT_TIMEOUT));
+						XHCI_MAX_REXIT_TIMEOUT_MS));
 			spin_lock_irqsave(&xhci->lock, flags);
 
 			if (time_left) {
@@ -934,7 +934,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
 			} else {
 				int port_status = readl(port->addr);
 				xhci_warn(xhci, "Port resume took longer than %i msec, port status = 0x%x\n",
-						XHCI_MAX_REXIT_TIMEOUT,
+						XHCI_MAX_REXIT_TIMEOUT_MS,
 						port_status);
 				status |= USB_PORT_STAT_SUSPEND;
 				clear_bit(wIndex, &bus_state->rexit_ports);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 6230a578324c..237877042262 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1678,7 +1678,7 @@ struct xhci_bus_state {
  * It can take up to 20 ms to transition from RExit to U0 on the
  * Intel Lynx Point LP xHCI host.
  */
-#define	XHCI_MAX_REXIT_TIMEOUT	(20 * 1000)
+#define	XHCI_MAX_REXIT_TIMEOUT_MS	20
 
 static inline unsigned int hcd_index(struct usb_hcd *hcd)
 {
-- 
2.19.1