[PATCH] pinctrl: meson: fix pinconf bias disable

From: Jerome Brunet
Date: Tue Oct 23 2018 - 12:03:31 EST


If a bias is enabled on a pin of an Amlogic SoC, calling .pin_config_set()
with PIN_CONFIG_BIAS_DISABLE will not disable the bias. Instead it will
force a pull-down bias on the pin.

Instead of the pull type register bank, the driver should access the pull
enable register bank.

Fixes: 6ac730951104 ("pinctrl: add driver for Amlogic Meson SoCs")
Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
---
drivers/pinctrl/meson/pinctrl-meson.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c
index 29a458da78db..4f3ab18636a3 100644
--- a/drivers/pinctrl/meson/pinctrl-meson.c
+++ b/drivers/pinctrl/meson/pinctrl-meson.c
@@ -192,7 +192,7 @@ static int meson_pinconf_set(struct pinctrl_dev *pcdev, unsigned int pin,
dev_dbg(pc->dev, "pin %u: disable bias\n", pin);

meson_calc_reg_and_bit(bank, pin, REG_PULL, &reg, &bit);
- ret = regmap_update_bits(pc->reg_pull, reg,
+ ret = regmap_update_bits(pc->reg_pullen, reg,
BIT(bit), 0);
if (ret)
return ret;
--
2.17.2