Re: [PATCH v2 0/3] UP Squared board drivers

[Andy Shevchenko]

On Fri, Oct 19, 2018 at 06:15:31PM +0100, Dan O'Donovan wrote:
> Hi all,
> 
> This series adds platform support for AAEON's UP Squared, a x86 SBC
> based on Apollo Lake [1]. Specifically, it enables control for the board
> pin headers and for the LEDs, as both of these features are only
> available behind a FPGA-based platform controller.
> 
> This is structured around a MFD driver that provides a regmap interface
> to that platform controller to each MFD cell.
> 
> The series is carved out from an out-of-tree support patchset, initially
> written for the original UP Board [2] and then extended through the past
> year to support new entries in the lineup (UP Board, UP Squared and
> UP Core) [3].
> 
> Here we only submit support for UP Squared to simplify review. Still,
> the driver is designed so that it can easily gain support for the other
> boards.
> 
> V1 was originally submitted by Javier Arteaga in April 2018 as an RFC [4].
> This V2 aims to address the feedback gratefully received from that.

Are you attending ELCE in Edinburgh?

> 
> [1]: http://www.up-board.org/upsquared/specifications-up2/
> [2]: https://lkml.kernel.org/r/1467648434-29080-1-git-send-email-dan@xxxxxxxxxx
> [3]: https://github.com/emutex/ubilinux-kernel/commits/upboard-4.9
> [4]: https://lore.kernel.org/lkml/20180421085009.28773-1-javier@xxxxxxxxxx/
> 
> V2:
> * Rewrote regmap r/w handlers to avoid duplication and improve readability
> * Simplified data passing between MFD parent and child device drivers
> * Removed incorrect __init attribute from probe functions
> * Moved MFD cell definitions into same patch as MFD driver and simplified them
> * Promoted some dev_dbg instances to dev_err for probe error cases
> * Decoupled MFD cell reference from ACPI driver data
> * Miscellanous coding style improvements
> * Fixed license mismatches
> 
> Javier Arteaga (3):
>   mfd: upboard: Add UP2 platform controller driver
>   leds: upboard: Add LED support
>   pinctrl: upboard: Add UP2 pinctrl and gpio driver
> 
>  drivers/leds/Kconfig              |  10 +
>  drivers/leds/Makefile             |   1 +
>  drivers/leds/leds-upboard.c       | 104 ++++++++
>  drivers/mfd/Kconfig               |  17 ++
>  drivers/mfd/Makefile              |   1 +
>  drivers/mfd/upboard.c             | 344 +++++++++++++++++++++++++
>  drivers/pinctrl/Kconfig           |  13 +
>  drivers/pinctrl/Makefile          |   1 +
>  drivers/pinctrl/pinctrl-upboard.c | 519 ++++++++++++++++++++++++++++++++++++++
>  include/linux/mfd/upboard.h       |  44 ++++
>  10 files changed, 1054 insertions(+)
>  create mode 100644 drivers/leds/leds-upboard.c
>  create mode 100644 drivers/mfd/upboard.c
>  create mode 100644 drivers/pinctrl/pinctrl-upboard.c
>  create mode 100644 include/linux/mfd/upboard.h
> 
> -- 
> 2.7.4
> 
> 
> ------
> This email has been scanned for spam and malware by The Email Laundry.
> 

-- 
With Best Regards,
Andy Shevchenko