Re: [PATCH 1/4] drm/sun4i: tcon: Support an active-low DE signal with RGB interface

[Maxime Ripard]

On Tue, Oct 23, 2018 at 11:33:10AM +0200, Paul Kocialkowski wrote:
> Hi,
> 
> Le mercredi 10 octobre 2018 à 16:57 +0200, Maxime Ripard a écrit :
> > On Wed, Oct 10, 2018 at 01:41:31PM +0200, Paul Kocialkowski wrote:
> > > Some panels need an active-low data enable (DE) signal for the RGB
> > > interface. This requires flipping a bit in the TCON0 polarity register
> > > when setting up the mode for the RGB interface.
> > > 
> > > Add a new helper function to match specific bus flags and use it to set
> > > the polarity inversion bit for the DE signal when required.
> > > 
> > > Signed-off-by: Paul Kocialkowski <contact@xxxxxxxx>
> > > ---
> > >  drivers/gpu/drm/sun4i/sun4i_tcon.c | 28 ++++++++++++++++++++++++++--
> > >  drivers/gpu/drm/sun4i/sun4i_tcon.h |  1 +
> > >  2 files changed, 27 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> > > index 3fb084f802e2..d249a462ec09 100644
> > > --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
> > > +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> > > @@ -78,6 +78,24 @@ static int sun4i_tcon_get_pixel_depth(const struct drm_encoder *encoder)
> > >  	return -EINVAL;
> > >  }
> > >  
> > > +static bool sun4i_tcon_match_bus_flags(const struct drm_encoder *encoder,
> > > +				       u32 bus_flags)
> > > +{
> > > +	struct drm_connector *connector;
> > > +	struct drm_display_info *info;
> > > +
> > > +	connector = sun4i_tcon_get_connector(encoder);
> > > +	if (!connector)
> > > +		return false;
> > > +
> > > +	info = &connector->display_info;
> > > +
> > > +	if ((info->bus_flags & bus_flags) == bus_flags)
> > > +		return true;
> > > +
> > > +	return false;
> > > +}
> > > +
> > >  static void sun4i_tcon_channel_set_status(struct sun4i_tcon *tcon, int channel,
> > >  					  bool enabled)
> > >  {
> > > @@ -415,6 +433,7 @@ static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon,
> > >  }
> > >  
> > >  static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
> > > +				     const struct drm_encoder *encoder,
> > >  				     const struct drm_display_mode *mode)
> > >  {
> > >  	unsigned int bp, hsync, vsync;
> > > @@ -474,8 +493,13 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
> > >  	if (mode->flags & DRM_MODE_FLAG_PVSYNC)
> > >  		val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE;
> > >  
> > > +	if (sun4i_tcon_match_bus_flags(encoder, DRM_BUS_FLAG_DE_LOW))
> > > +		val |= SUN4I_TCON0_IO_POL_DE_NEGATIVE;
> > > +
> > 
> > There's other flags in use in that function, you should also migrate
> > them (ideally by splitting that new function into a separate patch).
> 
> Actually, these other flags are not DRM bus flags but DRM mode flags,
> which can be accessed directly from the mode pointer passed as
> argument. Thus, they don't require a helper.

I was talking about DRM_BUS_FLAG_PIXDATA_POSEDGE and
DRM_BUS_FLAG_PIXDATA_NEGEDGE, which are in the current tree.

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com