[PATCH 1/2] mpt3sas: Update MPI headers to support Aero controllers.
From: Suganath Prabu
Date: Thu Oct 25 2018 - 06:11:19 EST
Updating MPI headers to the latest version 2.6.7 to
add support to the driver to detect the new 3816
and 3916 chip based controllers.
Separate out firmware image data from mpi2_ioc.h
to new file mpi2_image.h
Signed-off-by: Suganath Prabu <suganath-prabu.subramani@xxxxxxxxxxxx>
---
drivers/scsi/mpt3sas/mpi/mpi2.h | 17 +-
drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h | 94 +++++--
drivers/scsi/mpt3sas/mpi/mpi2_image.h | 507 ++++++++++++++++++++++++++++++++++
drivers/scsi/mpt3sas/mpi/mpi2_init.h | 2 +-
drivers/scsi/mpt3sas/mpi/mpi2_ioc.h | 359 +-----------------------
drivers/scsi/mpt3sas/mpi/mpi2_pci.h | 11 +-
drivers/scsi/mpt3sas/mpi/mpi2_raid.h | 2 +-
drivers/scsi/mpt3sas/mpi/mpi2_sas.h | 2 +-
drivers/scsi/mpt3sas/mpi/mpi2_tool.h | 72 ++++-
9 files changed, 678 insertions(+), 388 deletions(-)
create mode 100644 drivers/scsi/mpt3sas/mpi/mpi2_image.h
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2.h b/drivers/scsi/mpt3sas/mpi/mpi2.h
index 1e45268..7efd17a 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
- * Copyright 2000-2015 Avago Technologies. All rights reserved.
+ * Copyright 2000-2020 Broadcom Inc. All rights reserved.
*
*
* Name: mpi2.h
@@ -9,7 +9,7 @@
* scatter/gather formats.
* Creation Date: June 21, 2006
*
- * mpi2.h Version: 02.00.50
+ * mpi2.h Version: 02.00.53
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -116,7 +116,12 @@
* 02-03-17 02.00.48 Bumped MPI2_HEADER_VERSION_UNIT.
* 06-13-17 02.00.49 Bumped MPI2_HEADER_VERSION_UNIT.
* 09-29-17 02.00.50 Bumped MPI2_HEADER_VERSION_UNIT.
- * --------------------------------------------------------------------------
+ * 07-22-18 02.00.51 Added SECURE_BOOT define.
+ * Bumped MPI2_HEADER_VERSION_UNIT
+ * 08-15-18 02.00.52 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 08-28-18 02.00.53 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added MPI2_IOCSTATUS_FAILURE
+ * --------------------------------------------------------------------------
*/
#ifndef MPI2_H
@@ -156,7 +161,7 @@
/* Unit and Dev versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT (0x32)
+#define MPI2_HEADER_VERSION_UNIT (0x35)
#define MPI2_HEADER_VERSION_DEV (0x00)
#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
@@ -257,6 +262,8 @@ typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS {
*/
#define MPI2_HOST_DIAGNOSTIC_OFFSET (0x00000008)
+#define MPI26_DIAG_SECURE_BOOT (0x80000000)
+
#define MPI2_DIAG_SBR_RELOAD (0x00002000)
#define MPI2_DIAG_BOOT_DEVICE_SELECT_MASK (0x00001800)
@@ -687,7 +694,9 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION {
#define MPI2_IOCSTATUS_INVALID_FIELD (0x0007)
#define MPI2_IOCSTATUS_INVALID_STATE (0x0008)
#define MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED (0x0009)
+/*MPI v2.6 and later */
#define MPI2_IOCSTATUS_INSUFFICIENT_POWER (0x000A)
+#define MPI2_IOCSTATUS_FAILURE (0x000F)
/****************************************************************************
* Config IOCStatus values
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
index 5122920..398fa6f 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
@@ -1,13 +1,13 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
- * Copyright 2000-2015 Avago Technologies. All rights reserved.
+ * Copyright 2000-2020 Broadcom Inc. All rights reserved.
*
*
* Name: mpi2_cnfg.h
* Title: MPI Configuration messages and pages
* Creation Date: November 10, 2006
*
- * mpi2_cnfg.h Version: 02.00.42
+ * mpi2_cnfg.h Version: 02.00.46
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -231,6 +231,18 @@
* Added NOIOB field to PCIe Device Page 2.
* Added MPI26_PCIEDEV2_CAP_DATA_BLK_ALIGN_AND_GRAN to
* the Capabilities field of PCIe Device Page 2.
+ * 07-22-18 02.00.43 Added defines for SAS3916 and SAS3816.
+ * Added WRiteCache defines to IO Unit Page 1.
+ * Added MaxEnclosureLevel to BIOS Page 1.
+ * Added OEMRD to SAS Enclosure Page 1.
+ * Added DMDReportPCIe to PCIe IO Unit Page 1.
+ * Added Flags field and flags for Retimers to
+ * PCIe Switch Page 1.
+ * 08-02-18 02.00.44 Added Slotx2, Slotx4 to ManPage 7.
+ * 08-15-18 02.00.45 Added ProductSpecific field at end of IOC Page 1
+ * 08-28-18 02.00.46 Added NVMs Write Cache flag to IOUnitPage1
+ * Added DMDReport Delay Time defines to
+ * PCIeIOUnitPage1
* --------------------------------------------------------------------------
*/
@@ -568,8 +580,17 @@ typedef struct _MPI2_CONFIG_REPLY {
#define MPI26_MFGPAGE_DEVID_SAS3616 (0x00D1)
#define MPI26_MFGPAGE_DEVID_SAS3708 (0x00D2)
-#define MPI26_MFGPAGE_DEVID_SAS3816 (0x00A1)
-#define MPI26_MFGPAGE_DEVID_SAS3916 (0x00A0)
+#define MPI26_MFGPAGE_DEVID_SEC_MASK_3916 (0x0003)
+#define MPI26_MFGPAGE_DEVID_INVALID0_3916 (0x00E0)
+#define MPI26_MFGPAGE_DEVID_CFG_SEC_3916 (0x00E1)
+#define MPI26_MFGPAGE_DEVID_HARD_SEC_3916 (0x00E2)
+#define MPI26_MFGPAGE_DEVID_INVALID1_3916 (0x00E3)
+
+#define MPI26_MFGPAGE_DEVID_SEC_MASK_3816 (0x0003)
+#define MPI26_MFGPAGE_DEVID_INVALID0_3816 (0x00E4)
+#define MPI26_MFGPAGE_DEVID_CFG_SEC_3816 (0x00E5)
+#define MPI26_MFGPAGE_DEVID_HARD_SEC_3816 (0x00E6)
+#define MPI26_MFGPAGE_DEVID_INVALID1_3816 (0x00E7)
/*Manufacturing Page 0 */
@@ -932,7 +953,11 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 {
#define MPI2_IOUNITPAGE1_PAGEVERSION (0x04)
-/*IO Unit Page 1 Flags defines */
+/* IO Unit Page 1 Flags defines */
+#define MPI26_IOUNITPAGE1_NVME_WRCACHE_MASK (0x00030000)
+#define MPI26_IOUNITPAGE1_NVME_WRCACHE_ENABLE (0x00000000)
+#define MPI26_IOUNITPAGE1_NVME_WRCACHE_DISABLE (0x00010000)
+#define MPI26_IOUNITPAGE1_NVME_WRCACHE_NO_CHANGE (0x00020000)
#define MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK (0x00004000)
#define MPI25_IOUNITPAGE1_NEW_DEVICE_FAST_PATH_DISABLE (0x00002000)
#define MPI25_IOUNITPAGE1_DISABLE_FAST_PATH (0x00001000)
@@ -1511,7 +1536,7 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 {
U32 BiosOptions; /*0x04 */
U32 IOCSettings; /*0x08 */
U8 SSUTimeout; /*0x0C */
- U8 Reserved1; /*0x0D */
+ U8 MaxEnclosureLevel; /*0x0D */
U16 Reserved2; /*0x0E */
U32 DeviceSettings; /*0x10 */
U16 NumberOfDevices; /*0x14 */
@@ -1531,7 +1556,6 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 {
#define MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG (0x00004000)
#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800)
-#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800)
#define MPI2_BIOSPAGE1_OPTIONS_PNS_PBDHL (0x00000000)
#define MPI2_BIOSPAGE1_OPTIONS_PNS_ENCSLOSURE (0x00000800)
#define MPI2_BIOSPAGE1_OPTIONS_PNS_LWWID (0x00001000)
@@ -3271,10 +3295,12 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
U16 NumSlots; /*0x18 */
U16 StartSlot; /*0x1A */
U8 ChassisSlot; /*0x1C */
- U8 EnclosureLeve; /*0x1D */
+ U8 EnclosureLevel; /*0x1D */
U16 SEPDevHandle; /*0x1E */
- U32 Reserved3; /*0x20 */
- U32 Reserved4; /*0x24 */
+ U8 OEMRD; /*0x20 */
+ U8 Reserved1a; /*0x21 */
+ U16 Reserved2; /*0x22 */
+ U32 Reserved3; /*0x24 */
} MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
*PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t,
@@ -3285,6 +3311,8 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
#define MPI2_SASENCLOSURE0_PAGEVERSION (0x04)
/*values for SAS Enclosure Page 0 Flags field */
+#define MPI26_SAS_ENCLS0_FLAGS_OEMRD_VALID (0x0080)
+#define MPI26_SAS_ENCLS0_FLAGS_OEMRD_COLLECTING (0x0040)
#define MPI2_SAS_ENCLS0_FLAGS_CHASSIS_SLOT_VALID (0x0020)
#define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010)
#define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F)
@@ -3298,6 +3326,8 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
#define MPI26_ENCLOSURE0_PAGEVERSION (0x04)
/*Values for Enclosure Page 0 Flags field */
+#define MPI26_ENCLS0_FLAGS_OEMRD_VALID (0x0080)
+#define MPI26_ENCLS0_FLAGS_OEMRD_COLLECTING (0x0040)
#define MPI26_ENCLS0_FLAGS_CHASSIS_SLOT_VALID (0x0020)
#define MPI26_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010)
#define MPI26_ENCLS0_FLAGS_MNG_MASK (0x000F)
@@ -3696,8 +3726,9 @@ typedef struct _MPI26_PCIE_IO_UNIT1_PHY_DATA {
Mpi26PCIeIOUnit1PhyData_t, *pMpi26PCIeIOUnit1PhyData_t;
/*values for LinkFlags */
-#define MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SRIS (0x00)
-#define MPI26_PCIEIOUNIT1_LINKFLAGS_EN_SRIS (0x01)
+#define MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SEPARATE_REFCLK (0x00)
+#define MPI26_PCIEIOUNIT1_LINKFLAGS_SRIS_EN (0x01)
+#define MPI26_PCIEIOUNIT1_LINKFLAGS_SRNS_EN (0x02)
/*
*Host code (drivers, BIOS, utilities, etc.) should leave this define set to
@@ -3714,7 +3745,7 @@ typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_1 {
U16 AdditionalControlFlags; /*0x0C */
U16 NVMeMaxQueueDepth; /*0x0E */
U8 NumPhys; /*0x10 */
- U8 Reserved1; /*0x11 */
+ U8 DMDReportPCIe; /*0x11 */
U16 Reserved2; /*0x12 */
MPI26_PCIE_IO_UNIT1_PHY_DATA
PhyData[MPI26_PCIE_IOUNIT1_PHY_MAX];/*0x14 */
@@ -3736,6 +3767,12 @@ typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_1 {
#define MPI26_PCIEIOUNIT1_MAX_RATE_8_0 (0x40)
#define MPI26_PCIEIOUNIT1_MAX_RATE_16_0 (0x50)
+/*values for PCIe IO Unit Page 1 DMDReportPCIe */
+#define MPI26_PCIEIOUNIT1_DMDRPT_UNIT_MASK (0x80)
+#define MPI26_PCIEIOUNIT1_DMDRPT_UNIT_1_SEC (0x00)
+#define MPI26_PCIEIOUNIT1_DMDRPT_UNIT_16_SEC (0x80)
+#define MPI26_PCIEIOUNIT1_DMDRPT_DELAY_TIME_MASK (0x7F)
+
/*see mpi2_pci.h for values for PCIe IO Unit Page 0 ControllerPhyDeviceInfo
*values
*/
@@ -3788,6 +3825,9 @@ typedef struct _MPI26_CONFIG_PAGE_PSWITCH_1 {
/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
+/* defines for the Flags field */
+#define MPI26_PCIESWITCH1_2_RETIMER_PRESENCE (0x0002)
+#define MPI26_PCIESWITCH1_RETIMER_PRESENCE (0x0001)
/****************************************************************************
* PCIe Device Config Pages (MPI v2.6 and later)
@@ -3849,19 +3889,21 @@ typedef struct _MPI26_CONFIG_PAGE_PCIEDEV_0 {
*field
*/
-/*values for PCIe Device Page 0 Flags field */
-#define MPI26_PCIEDEV0_FLAGS_UNAUTHORIZED_DEVICE (0x8000)
-#define MPI26_PCIEDEV0_FLAGS_ENABLED_FAST_PATH (0x4000)
-#define MPI26_PCIEDEV0_FLAGS_FAST_PATH_CAPABLE (0x2000)
-#define MPI26_PCIEDEV0_FLAGS_ASYNCHRONOUS_NOTIFICATION (0x0400)
-#define MPI26_PCIEDEV0_FLAGS_ATA_SW_PRESERVATION (0x0200)
-#define MPI26_PCIEDEV0_FLAGS_UNSUPPORTED_DEVICE (0x0100)
-#define MPI26_PCIEDEV0_FLAGS_ATA_48BIT_LBA_SUPPORTED (0x0080)
-#define MPI26_PCIEDEV0_FLAGS_ATA_SMART_SUPPORTED (0x0040)
-#define MPI26_PCIEDEV0_FLAGS_ATA_NCQ_SUPPORTED (0x0020)
-#define MPI26_PCIEDEV0_FLAGS_ATA_FUA_SUPPORTED (0x0010)
-#define MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID (0x0002)
-#define MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT (0x0001)
+/*values for PCIe Device Page 0 Flags field*/
+#define MPI26_PCIEDEV0_FLAGS_2_RETIMER_PRESENCE (0x00020000)
+#define MPI26_PCIEDEV0_FLAGS_RETIMER_PRESENCE (0x00010000)
+#define MPI26_PCIEDEV0_FLAGS_UNAUTHORIZED_DEVICE (0x00008000)
+#define MPI26_PCIEDEV0_FLAGS_ENABLED_FAST_PATH (0x00004000)
+#define MPI26_PCIEDEV0_FLAGS_FAST_PATH_CAPABLE (0x00002000)
+#define MPI26_PCIEDEV0_FLAGS_ASYNCHRONOUS_NOTIFICATION (0x00000400)
+#define MPI26_PCIEDEV0_FLAGS_ATA_SW_PRESERVATION (0x00000200)
+#define MPI26_PCIEDEV0_FLAGS_UNSUPPORTED_DEVICE (0x00000100)
+#define MPI26_PCIEDEV0_FLAGS_ATA_48BIT_LBA_SUPPORTED (0x00000080)
+#define MPI26_PCIEDEV0_FLAGS_ATA_SMART_SUPPORTED (0x00000040)
+#define MPI26_PCIEDEV0_FLAGS_ATA_NCQ_SUPPORTED (0x00000020)
+#define MPI26_PCIEDEV0_FLAGS_ATA_FUA_SUPPORTED (0x00000010)
+#define MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID (0x00000002)
+#define MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT (0x00000001)
/* values for PCIe Device Page 0 SupportedLinkRates field */
#define MPI26_PCIEDEV0_LINK_RATE_16_0_SUPPORTED (0x08)
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_image.h b/drivers/scsi/mpt3sas/mpi/mpi2_image.h
new file mode 100644
index 0000000..9b49c1c
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_image.h
@@ -0,0 +1,507 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2016-2020 Broadcom Limited. All rights reserved.
+ *
+ * Name: mpi2_image.h
+ * Description: Contains definitions for firmware and other component images
+ * Creation Date: 04/02/2018
+ * Version: 02.06.03
+ *
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * 08-01-18 02.06.00 Initial version for MPI 2.6.5.
+ * 08-14-18 02.06.01 Corrected define for MPI26_IMAGE_HEADER_SIGNATURE0_MPI26
+ * 08-28-18 02.06.02 Added MPI2_EXT_IMAGE_TYPE_RDE
+ * 09-07-18 02.06.03 Added MPI26_EVENT_PCIE_TOPO_PI_16_LANES
+ */
+#ifndef MPI2_IMAGE_H
+#define MPI2_IMAGE_H
+
+
+/*FW Image Header */
+typedef struct _MPI2_FW_IMAGE_HEADER {
+ U32 Signature; /*0x00 */
+ U32 Signature0; /*0x04 */
+ U32 Signature1; /*0x08 */
+ U32 Signature2; /*0x0C */
+ MPI2_VERSION_UNION MPIVersion; /*0x10 */
+ MPI2_VERSION_UNION FWVersion; /*0x14 */
+ MPI2_VERSION_UNION NVDATAVersion; /*0x18 */
+ MPI2_VERSION_UNION PackageVersion; /*0x1C */
+ U16 VendorID; /*0x20 */
+ U16 ProductID; /*0x22 */
+ U16 ProtocolFlags; /*0x24 */
+ U16 Reserved26; /*0x26 */
+ U32 IOCCapabilities; /*0x28 */
+ U32 ImageSize; /*0x2C */
+ U32 NextImageHeaderOffset; /*0x30 */
+ U32 Checksum; /*0x34 */
+ U32 Reserved38; /*0x38 */
+ U32 Reserved3C; /*0x3C */
+ U32 Reserved40; /*0x40 */
+ U32 Reserved44; /*0x44 */
+ U32 Reserved48; /*0x48 */
+ U32 Reserved4C; /*0x4C */
+ U32 Reserved50; /*0x50 */
+ U32 Reserved54; /*0x54 */
+ U32 Reserved58; /*0x58 */
+ U32 Reserved5C; /*0x5C */
+ U32 BootFlags; /*0x60 */
+ U32 FirmwareVersionNameWhat; /*0x64 */
+ U8 FirmwareVersionName[32]; /*0x68 */
+ U32 VendorNameWhat; /*0x88 */
+ U8 VendorName[32]; /*0x8C */
+ U32 PackageNameWhat; /*0x88 */
+ U8 PackageName[32]; /*0x8C */
+ U32 ReservedD0; /*0xD0 */
+ U32 ReservedD4; /*0xD4 */
+ U32 ReservedD8; /*0xD8 */
+ U32 ReservedDC; /*0xDC */
+ U32 ReservedE0; /*0xE0 */
+ U32 ReservedE4; /*0xE4 */
+ U32 ReservedE8; /*0xE8 */
+ U32 ReservedEC; /*0xEC */
+ U32 ReservedF0; /*0xF0 */
+ U32 ReservedF4; /*0xF4 */
+ U32 ReservedF8; /*0xF8 */
+ U32 ReservedFC; /*0xFC */
+} MPI2_FW_IMAGE_HEADER, *PTR_MPI2_FW_IMAGE_HEADER,
+ Mpi2FWImageHeader_t, *pMpi2FWImageHeader_t;
+
+/*Signature field */
+#define MPI2_FW_HEADER_SIGNATURE_OFFSET (0x00)
+#define MPI2_FW_HEADER_SIGNATURE_MASK (0xFF000000)
+#define MPI2_FW_HEADER_SIGNATURE (0xEA000000)
+#define MPI26_FW_HEADER_SIGNATURE (0xEB000000)
+
+/*Signature0 field */
+#define MPI2_FW_HEADER_SIGNATURE0_OFFSET (0x04)
+#define MPI2_FW_HEADER_SIGNATURE0 (0x5AFAA55A)
+/*Last byte is defined by architecture */
+#define MPI26_FW_HEADER_SIGNATURE0_BASE (0x5AEAA500)
+#define MPI26_FW_HEADER_SIGNATURE0_ARC_0 (0x5A)
+#define MPI26_FW_HEADER_SIGNATURE0_ARC_1 (0x00)
+#define MPI26_FW_HEADER_SIGNATURE0_ARC_2 (0x01)
+/*legacy (0x5AEAA55A) */
+#define MPI26_FW_HEADER_SIGNATURE0_ARC_3 (0x02)
+#define MPI26_FW_HEADER_SIGNATURE0 \
+ (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_0)
+#define MPI26_FW_HEADER_SIGNATURE0_3516 \
+ (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_1)
+#define MPI26_FW_HEADER_SIGNATURE0_4008 \
+ (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_3)
+
+/*Signature1 field */
+#define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08)
+#define MPI2_FW_HEADER_SIGNATURE1 (0xA55AFAA5)
+#define MPI26_FW_HEADER_SIGNATURE1 (0xA55AEAA5)
+
+/*Signature2 field */
+#define MPI2_FW_HEADER_SIGNATURE2_OFFSET (0x0C)
+#define MPI2_FW_HEADER_SIGNATURE2 (0x5AA55AFA)
+#define MPI26_FW_HEADER_SIGNATURE2 (0x5AA55AEA)
+
+/*defines for using the ProductID field */
+#define MPI2_FW_HEADER_PID_TYPE_MASK (0xF000)
+#define MPI2_FW_HEADER_PID_TYPE_SAS (0x2000)
+
+#define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00)
+#define MPI2_FW_HEADER_PID_PROD_A (0x0000)
+#define MPI2_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI (0x0200)
+#define MPI2_FW_HEADER_PID_PROD_IR_SCSI (0x0700)
+
+#define MPI2_FW_HEADER_PID_FAMILY_MASK (0x00FF)
+/*SAS ProductID Family bits */
+#define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0013)
+#define MPI2_FW_HEADER_PID_FAMILY_2208_SAS (0x0014)
+#define MPI25_FW_HEADER_PID_FAMILY_3108_SAS (0x0021)
+#define MPI26_FW_HEADER_PID_FAMILY_3324_SAS (0x0028)
+#define MPI26_FW_HEADER_PID_FAMILY_3516_SAS (0x0031)
+
+/*use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */
+
+/*use MPI2_IOCFACTS_CAPABILITY_ defines for IOCCapabilities field */
+
+#define MPI2_FW_HEADER_IMAGESIZE_OFFSET (0x2C)
+#define MPI2_FW_HEADER_NEXTIMAGE_OFFSET (0x30)
+
+#define MPI26_FW_HEADER_BOOTFLAGS_OFFSET (0x60)
+#define MPI2_FW_HEADER_BOOTFLAGS_ISSI32M_FLAG (0x00000001)
+#define MPI2_FW_HEADER_BOOTFLAGS_W25Q256JW_FLAG (0x00000002)
+/*This image has a auto-discovery version of SPI */
+#define MPI2_FW_HEADER_BOOTFLAGS_AUTO_SPI_FLAG (0x00000004)
+
+
+#define MPI2_FW_HEADER_VERNMHWAT_OFFSET (0x64)
+
+#define MPI2_FW_HEADER_WHAT_SIGNATURE (0x29232840)
+
+#define MPI2_FW_HEADER_SIZE (0x100)
+
+
+/****************************************************************************
+ * Component Image Format and related defines *
+ ****************************************************************************/
+
+/*Maximum number of Hash Exclusion entries in a Component Image Header */
+#define MPI26_COMP_IMG_HDR_NUM_HASH_EXCL (4)
+
+/*Hash Exclusion Format */
+typedef struct _MPI26_HASH_EXCLUSION_FORMAT {
+ U32 Offset; /*0x00 */
+ U32 Size; /*0x04 */
+} MPI26_HASH_EXCLUSION_FORMAT,
+ *PTR_MPI26_HASH_EXCLUSION_FORMAT,
+ Mpi26HashSxclusionFormat_t,
+ *pMpi26HashExclusionFormat_t;
+
+/*FW Image Header */
+typedef struct _MPI26_COMPONENT_IMAGE_HEADER {
+ U32 Signature0; /*0x00 */
+ U32 LoadAddress; /*0x04 */
+ U32 DataSize; /*0x08 */
+ U32 StartAddress; /*0x0C */
+ U32 Signature1; /*0x10 */
+ U32 FlashOffset; /*0x14 */
+ U32 FlashSize; /*0x18 */
+ U32 VersionStringOffset; /*0x1C */
+ U32 BuildDateStringOffset; /*0x20 */
+ U32 BuildTimeStringOffset; /*0x24 */
+ U32 EnvironmentVariableOffset; /*0x28 */
+ U32 ApplicationSpecific; /*0x2C */
+ U32 Signature2; /*0x30 */
+ U32 HeaderSize; /*0x34 */
+ U32 Crc; /*0x38 */
+ U8 NotFlashImage; /*0x3C */
+ U8 Compressed; /*0x3D */
+ U16 Reserved3E; /*0x3E */
+ U32 SecondaryFlashOffset; /*0x40 */
+ U32 Reserved44; /*0x44 */
+ U32 Reserved48; /*0x48 */
+ MPI2_VERSION_UNION RMCInterfaceVersion; /*0x4C */
+ MPI2_VERSION_UNION Reserved50; /*0x50 */
+ MPI2_VERSION_UNION FWVersion; /*0x54 */
+ MPI2_VERSION_UNION NvdataVersion; /*0x58 */
+ MPI26_HASH_EXCLUSION_FORMAT
+ HashExclusion[MPI26_COMP_IMG_HDR_NUM_HASH_EXCL];/*0x5C */
+ U32 NextImageHeaderOffset; /*0x7C */
+ U32 Reserved80[32]; /*0x80 -- 0xFC */
+} MPI26_COMPONENT_IMAGE_HEADER,
+ *PTR_MPI26_COMPONENT_IMAGE_HEADER,
+ Mpi26ComponentImageHeader_t,
+ *pMpi26ComponentImageHeader_t;
+
+
+/**** Definitions for Signature0 field ****/
+#define MPI26_IMAGE_HEADER_SIGNATURE0_MPI26 (0xEB000042)
+
+/**** Definitions for Signature1 field ****/
+#define MPI26_IMAGE_HEADER_SIGNATURE1_APPLICATION (0x20505041)
+#define MPI26_IMAGE_HEADER_SIGNATURE1_CBB (0x20424243)
+#define MPI26_IMAGE_HEADER_SIGNATURE1_MFG (0x2047464D)
+#define MPI26_IMAGE_HEADER_SIGNATURE1_BIOS (0x534F4942)
+#define MPI26_IMAGE_HEADER_SIGNATURE1_HIIM (0x4D494948)
+#define MPI26_IMAGE_HEADER_SIGNATURE1_HIIA (0x41494948)
+#define MPI26_IMAGE_HEADER_SIGNATURE1_CPLD (0x444C5043)
+#define MPI26_IMAGE_HEADER_SIGNATURE1_SPD (0x20445053)
+#define MPI26_IMAGE_HEADER_SIGNATURE1_NVDATA (0x5444564E)
+#define MPI26_IMAGE_HEADER_SIGNATURE1_GAS_GAUGE (0x20534147)
+#define MPI26_IMAGE_HEADER_SIGNATURE1_PBLP (0x50424C50)
+
+/**** Definitions for Signature2 field ****/
+#define MPI26_IMAGE_HEADER_SIGNATURE2_VALUE (0x50584546)
+
+/**** Offsets for Image Header Fields ****/
+#define MPI26_IMAGE_HEADER_SIGNATURE0_OFFSET (0x00)
+#define MPI26_IMAGE_HEADER_LOAD_ADDRESS_OFFSET (0x04)
+#define MPI26_IMAGE_HEADER_DATA_SIZE_OFFSET (0x08)
+#define MPI26_IMAGE_HEADER_START_ADDRESS_OFFSET (0x0C)
+#define MPI26_IMAGE_HEADER_SIGNATURE1_OFFSET (0x10)
+#define MPI26_IMAGE_HEADER_FLASH_OFFSET_OFFSET (0x14)
+#define MPI26_IMAGE_HEADER_FLASH_SIZE_OFFSET (0x18)
+#define MPI26_IMAGE_HEADER_VERSION_STRING_OFFSET_OFFSET (0x1C)
+#define MPI26_IMAGE_HEADER_BUILD_DATE_STRING_OFFSET_OFFSET (0x20)
+#define MPI26_IMAGE_HEADER_BUILD_TIME_OFFSET_OFFSET (0x24)
+#define MPI26_IMAGE_HEADER_ENVIROMENT_VAR_OFFSET_OFFSET (0x28)
+#define MPI26_IMAGE_HEADER_APPLICATION_SPECIFIC_OFFSET (0x2C)
+#define MPI26_IMAGE_HEADER_SIGNATURE2_OFFSET (0x30)
+#define MPI26_IMAGE_HEADER_HEADER_SIZE_OFFSET (0x34)
+#define MPI26_IMAGE_HEADER_CRC_OFFSET (0x38)
+#define MPI26_IMAGE_HEADER_NOT_FLASH_IMAGE_OFFSET (0x3C)
+#define MPI26_IMAGE_HEADER_COMPRESSED_OFFSET (0x3D)
+#define MPI26_IMAGE_HEADER_SECONDARY_FLASH_OFFSET_OFFSET (0x40)
+#define MPI26_IMAGE_HEADER_RMC_INTERFACE_VER_OFFSET (0x4C)
+#define MPI26_IMAGE_HEADER_COMPONENT_IMAGE_VER_OFFSET (0x54)
+#define MPI26_IMAGE_HEADER_HASH_EXCLUSION_OFFSET (0x5C)
+#define MPI26_IMAGE_HEADER_NEXT_IMAGE_HEADER_OFFSET_OFFSET (0x7C)
+
+
+#define MPI26_IMAGE_HEADER_SIZE (0x100)
+
+
+/*Extended Image Header */
+typedef struct _MPI2_EXT_IMAGE_HEADER {
+ U8 ImageType; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 Reserved2; /*0x02 */
+ U32 Checksum; /*0x04 */
+ U32 ImageSize; /*0x08 */
+ U32 NextImageHeaderOffset; /*0x0C */
+ U32 PackageVersion; /*0x10 */
+ U32 Reserved3; /*0x14 */
+ U32 Reserved4; /*0x18 */
+ U32 Reserved5; /*0x1C */
+ U8 IdentifyString[32]; /*0x20 */
+} MPI2_EXT_IMAGE_HEADER, *PTR_MPI2_EXT_IMAGE_HEADER,
+ Mpi2ExtImageHeader_t, *pMpi2ExtImageHeader_t;
+
+/*useful offsets */
+#define MPI2_EXT_IMAGE_IMAGETYPE_OFFSET (0x00)
+#define MPI2_EXT_IMAGE_IMAGESIZE_OFFSET (0x08)
+#define MPI2_EXT_IMAGE_NEXTIMAGE_OFFSET (0x0C)
+#define MPI2_EXT_IMAGE_PACKAGEVERSION_OFFSET (0x10)
+
+#define MPI2_EXT_IMAGE_HEADER_SIZE (0x40)
+
+/*defines for the ImageType field */
+#define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED (0x00)
+#define MPI2_EXT_IMAGE_TYPE_FW (0x01)
+#define MPI2_EXT_IMAGE_TYPE_NVDATA (0x03)
+#define MPI2_EXT_IMAGE_TYPE_BOOTLOADER (0x04)
+#define MPI2_EXT_IMAGE_TYPE_INITIALIZATION (0x05)
+#define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT (0x06)
+#define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07)
+#define MPI2_EXT_IMAGE_TYPE_MEGARAID (0x08)
+#define MPI2_EXT_IMAGE_TYPE_ENCRYPTED_HASH (0x09)
+#define MPI2_EXT_IMAGE_TYPE_RDE (0x0A)
+#define MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC (0x80)
+#define MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC (0xFF)
+
+#define MPI2_EXT_IMAGE_TYPE_MAX (MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC)
+
+/*FLASH Layout Extended Image Data */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check RegionsPerLayout at runtime.
+ */
+#ifndef MPI2_FLASH_NUMBER_OF_REGIONS
+#define MPI2_FLASH_NUMBER_OF_REGIONS (1)
+#endif
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check NumberOfLayouts at runtime.
+ */
+#ifndef MPI2_FLASH_NUMBER_OF_LAYOUTS
+#define MPI2_FLASH_NUMBER_OF_LAYOUTS (1)
+#endif
+
+typedef struct _MPI2_FLASH_REGION {
+ U8 RegionType; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 Reserved2; /*0x02 */
+ U32 RegionOffset; /*0x04 */
+ U32 RegionSize; /*0x08 */
+ U32 Reserved3; /*0x0C */
+} MPI2_FLASH_REGION, *PTR_MPI2_FLASH_REGION,
+ Mpi2FlashRegion_t, *pMpi2FlashRegion_t;
+
+typedef struct _MPI2_FLASH_LAYOUT {
+ U32 FlashSize; /*0x00 */
+ U32 Reserved1; /*0x04 */
+ U32 Reserved2; /*0x08 */
+ U32 Reserved3; /*0x0C */
+ MPI2_FLASH_REGION Region[MPI2_FLASH_NUMBER_OF_REGIONS]; /*0x10 */
+} MPI2_FLASH_LAYOUT, *PTR_MPI2_FLASH_LAYOUT,
+ Mpi2FlashLayout_t, *pMpi2FlashLayout_t;
+
+typedef struct _MPI2_FLASH_LAYOUT_DATA {
+ U8 ImageRevision; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 SizeOfRegion; /*0x02 */
+ U8 Reserved2; /*0x03 */
+ U16 NumberOfLayouts; /*0x04 */
+ U16 RegionsPerLayout; /*0x06 */
+ U16 MinimumSectorAlignment; /*0x08 */
+ U16 Reserved3; /*0x0A */
+ U32 Reserved4; /*0x0C */
+ MPI2_FLASH_LAYOUT Layout[MPI2_FLASH_NUMBER_OF_LAYOUTS]; /*0x10 */
+} MPI2_FLASH_LAYOUT_DATA, *PTR_MPI2_FLASH_LAYOUT_DATA,
+ Mpi2FlashLayoutData_t, *pMpi2FlashLayoutData_t;
+
+/*defines for the RegionType field */
+#define MPI2_FLASH_REGION_UNUSED (0x00)
+#define MPI2_FLASH_REGION_FIRMWARE (0x01)
+#define MPI2_FLASH_REGION_BIOS (0x02)
+#define MPI2_FLASH_REGION_NVDATA (0x03)
+#define MPI2_FLASH_REGION_FIRMWARE_BACKUP (0x05)
+#define MPI2_FLASH_REGION_MFG_INFORMATION (0x06)
+#define MPI2_FLASH_REGION_CONFIG_1 (0x07)
+#define MPI2_FLASH_REGION_CONFIG_2 (0x08)
+#define MPI2_FLASH_REGION_MEGARAID (0x09)
+#define MPI2_FLASH_REGION_COMMON_BOOT_BLOCK (0x0A)
+#define MPI2_FLASH_REGION_INIT (MPI2_FLASH_REGION_COMMON_BOOT_BLOCK)
+#define MPI2_FLASH_REGION_CBB_BACKUP (0x0D)
+#define MPI2_FLASH_REGION_SBR (0x0E)
+#define MPI2_FLASH_REGION_SBR_BACKUP (0x0F)
+#define MPI2_FLASH_REGION_HIIM (0x10)
+#define MPI2_FLASH_REGION_HIIA (0x11)
+#define MPI2_FLASH_REGION_CTLR (0x12)
+#define MPI2_FLASH_REGION_IMR_FIRMWARE (0x13)
+#define MPI2_FLASH_REGION_MR_NVDATA (0x14)
+#define MPI2_FLASH_REGION_CPLD (0x15)
+#define MPI2_FLASH_REGION_PSOC (0x16)
+
+/*ImageRevision */
+#define MPI2_FLASH_LAYOUT_IMAGE_REVISION (0x00)
+
+/*Supported Devices Extended Image Data */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check NumberOfDevices at runtime.
+ */
+#ifndef MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES
+#define MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES (1)
+#endif
+
+typedef struct _MPI2_SUPPORTED_DEVICE {
+ U16 DeviceID; /*0x00 */
+ U16 VendorID; /*0x02 */
+ U16 DeviceIDMask; /*0x04 */
+ U16 Reserved1; /*0x06 */
+ U8 LowPCIRev; /*0x08 */
+ U8 HighPCIRev; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U32 Reserved3; /*0x0C */
+} MPI2_SUPPORTED_DEVICE, *PTR_MPI2_SUPPORTED_DEVICE,
+ Mpi2SupportedDevice_t, *pMpi2SupportedDevice_t;
+
+typedef struct _MPI2_SUPPORTED_DEVICES_DATA {
+ U8 ImageRevision; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 NumberOfDevices; /*0x02 */
+ U8 Reserved2; /*0x03 */
+ U32 Reserved3; /*0x04 */
+ MPI2_SUPPORTED_DEVICE
+ SupportedDevice[MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES];/*0x08 */
+} MPI2_SUPPORTED_DEVICES_DATA, *PTR_MPI2_SUPPORTED_DEVICES_DATA,
+ Mpi2SupportedDevicesData_t, *pMpi2SupportedDevicesData_t;
+
+/*ImageRevision */
+#define MPI2_SUPPORTED_DEVICES_IMAGE_REVISION (0x00)
+
+/*Init Extended Image Data */
+
+typedef struct _MPI2_INIT_IMAGE_FOOTER {
+ U32 BootFlags; /*0x00 */
+ U32 ImageSize; /*0x04 */
+ U32 Signature0; /*0x08 */
+ U32 Signature1; /*0x0C */
+ U32 Signature2; /*0x10 */
+ U32 ResetVector; /*0x14 */
+} MPI2_INIT_IMAGE_FOOTER, *PTR_MPI2_INIT_IMAGE_FOOTER,
+ Mpi2InitImageFooter_t, *pMpi2InitImageFooter_t;
+
+/*defines for the BootFlags field */
+#define MPI2_INIT_IMAGE_BOOTFLAGS_OFFSET (0x00)
+
+/*defines for the ImageSize field */
+#define MPI2_INIT_IMAGE_IMAGESIZE_OFFSET (0x04)
+
+/*defines for the Signature0 field */
+#define MPI2_INIT_IMAGE_SIGNATURE0_OFFSET (0x08)
+#define MPI2_INIT_IMAGE_SIGNATURE0 (0x5AA55AEA)
+
+/*defines for the Signature1 field */
+#define MPI2_INIT_IMAGE_SIGNATURE1_OFFSET (0x0C)
+#define MPI2_INIT_IMAGE_SIGNATURE1 (0xA55AEAA5)
+
+/*defines for the Signature2 field */
+#define MPI2_INIT_IMAGE_SIGNATURE2_OFFSET (0x10)
+#define MPI2_INIT_IMAGE_SIGNATURE2 (0x5AEAA55A)
+
+/*Signature fields as individual bytes */
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_0 (0xEA)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_1 (0x5A)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_2 (0xA5)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_3 (0x5A)
+
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_4 (0xA5)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_5 (0xEA)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_6 (0x5A)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_7 (0xA5)
+
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_8 (0x5A)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_9 (0xA5)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_A (0xEA)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_B (0x5A)
+
+/*defines for the ResetVector field */
+#define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET (0x14)
+
+
+/* Encrypted Hash Extended Image Data */
+
+typedef struct _MPI25_ENCRYPTED_HASH_ENTRY {
+ U8 HashImageType; /*0x00 */
+ U8 HashAlgorithm; /*0x01 */
+ U8 EncryptionAlgorithm; /*0x02 */
+ U8 Reserved1; /*0x03 */
+ U32 Reserved2; /*0x04 */
+ U32 EncryptedHash[1]; /*0x08 */ /* variable length */
+} MPI25_ENCRYPTED_HASH_ENTRY, *PTR_MPI25_ENCRYPTED_HASH_ENTRY,
+Mpi25EncryptedHashEntry_t, *pMpi25EncryptedHashEntry_t;
+
+/* values for HashImageType */
+#define MPI25_HASH_IMAGE_TYPE_UNUSED (0x00)
+#define MPI25_HASH_IMAGE_TYPE_FIRMWARE (0x01)
+#define MPI25_HASH_IMAGE_TYPE_BIOS (0x02)
+
+#define MPI26_HASH_IMAGE_TYPE_UNUSED (0x00)
+#define MPI26_HASH_IMAGE_TYPE_FIRMWARE (0x01)
+#define MPI26_HASH_IMAGE_TYPE_BIOS (0x02)
+#define MPI26_HASH_IMAGE_TYPE_KEY_HASH (0x03)
+
+/* values for HashAlgorithm */
+#define MPI25_HASH_ALGORITHM_UNUSED (0x00)
+#define MPI25_HASH_ALGORITHM_SHA256 (0x01)
+
+#define MPI26_HASH_ALGORITHM_VERSION_MASK (0xE0)
+#define MPI26_HASH_ALGORITHM_VERSION_NONE (0x00)
+#define MPI26_HASH_ALGORITHM_VERSION_SHA1 (0x20)
+#define MPI26_HASH_ALGORITHM_VERSION_SHA2 (0x40)
+#define MPI26_HASH_ALGORITHM_VERSION_SHA3 (0x60)
+#define MPI26_HASH_ALGORITHM_SIZE_MASK (0x1F)
+#define MPI26_HASH_ALGORITHM_SIZE_256 (0x01)
+#define MPI26_HASH_ALGORITHM_SIZE_512 (0x02)
+
+
+/* values for EncryptionAlgorithm */
+#define MPI25_ENCRYPTION_ALG_UNUSED (0x00)
+#define MPI25_ENCRYPTION_ALG_RSA256 (0x01)
+
+#define MPI26_ENCRYPTION_ALG_UNUSED (0x00)
+#define MPI26_ENCRYPTION_ALG_RSA256 (0x01)
+#define MPI26_ENCRYPTION_ALG_RSA512 (0x02)
+#define MPI26_ENCRYPTION_ALG_RSA1024 (0x03)
+#define MPI26_ENCRYPTION_ALG_RSA2048 (0x04)
+#define MPI26_ENCRYPTION_ALG_RSA4096 (0x05)
+
+typedef struct _MPI25_ENCRYPTED_HASH_DATA {
+ U8 ImageVersion; /*0x00 */
+ U8 NumHash; /*0x01 */
+ U16 Reserved1; /*0x02 */
+ U32 Reserved2; /*0x04 */
+ MPI25_ENCRYPTED_HASH_ENTRY EncryptedHashEntry[1]; /*0x08 */
+} MPI25_ENCRYPTED_HASH_DATA, *PTR_MPI25_ENCRYPTED_HASH_DATA,
+Mpi25EncryptedHashData_t, *pMpi25EncryptedHashData_t;
+
+
+#endif /* MPI2_IMAGE_H */
+
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_init.h b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
index 6213ce6..8f1b903 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_init.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
- * Copyright 2000-2015 Avago Technologies. All rights reserved.
+ * Copyright 2000-2020 Broadcom Inc. All rights reserved.
*
*
* Name: mpi2_init.h
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
index 1faec3a..68ea408 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
@@ -1,13 +1,13 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
- * Copyright 2000-2015 Avago Technologies. All rights reserved.
+ * Copyright 2000-2020 Broadcom Inc. All rights reserved.
*
*
* Name: mpi2_ioc.h
* Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
* Creation Date: October 11, 2006
*
- * mpi2_ioc.h Version: 02.00.34
+ * mpi2_ioc.h Version: 02.00.37
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -171,6 +171,10 @@
* 09-29-17 02.00.34 Added MPI26_EVENT_PCIDEV_STAT_RC_PCIE_HOT_RESET_FAILED
* to the ReasonCode field in PCIe Device Status Change
* Event Data.
+ * 07-22-18 02.00.35 Added FW_DOWNLOAD_ITYPE_CPLD and _PSOC.
+ * Moved FW image definitions ionto new mpi2_image,h
+ * 08-14-18 02.00.36 Fixed definition of MPI2_FW_DOWNLOAD_ITYPE_PSOC (0x16)
+ * 09-07-18 02.00.37 Added MPI26_EVENT_PCIE_TOPO_PI_16_LANES
* --------------------------------------------------------------------------
*/
@@ -1255,6 +1259,7 @@ typedef struct _MPI26_EVENT_PCIE_TOPO_PORT_ENTRY {
#define MPI26_EVENT_PCIE_TOPO_PI_2_LANES (0x20)
#define MPI26_EVENT_PCIE_TOPO_PI_4_LANES (0x30)
#define MPI26_EVENT_PCIE_TOPO_PI_8_LANES (0x40)
+#define MPI26_EVENT_PCIE_TOPO_PI_16_LANES (0x50)
#define MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK (0x0F)
#define MPI26_EVENT_PCIE_TOPO_PI_RATE_UNKNOWN (0x00)
@@ -1450,7 +1455,11 @@ typedef struct _MPI2_FW_DOWNLOAD_REQUEST {
#define MPI2_FW_DOWNLOAD_ITYPE_CTLR (0x12)
#define MPI2_FW_DOWNLOAD_ITYPE_IMR_FIRMWARE (0x13)
#define MPI2_FW_DOWNLOAD_ITYPE_MR_NVDATA (0x14)
+/*MPI v2.6 and newer */
+#define MPI2_FW_DOWNLOAD_ITYPE_CPLD (0x15)
+#define MPI2_FW_DOWNLOAD_ITYPE_PSOC (0x16)
#define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0)
+#define MPI2_FW_DOWNLOAD_ITYPE_TERMINATE (0xFF)
/*MPI v2.0 FWDownload TransactionContext Element */
typedef struct _MPI2_FW_DOWNLOAD_TCSGE {
@@ -1597,352 +1606,6 @@ typedef struct _MPI2_FW_UPLOAD_REPLY {
} MPI2_FW_UPLOAD_REPLY, *PTR_MPI2_FW_UPLOAD_REPLY,
Mpi2FWUploadReply_t, *pMPi2FWUploadReply_t;
-/*FW Image Header */
-typedef struct _MPI2_FW_IMAGE_HEADER {
- U32 Signature; /*0x00 */
- U32 Signature0; /*0x04 */
- U32 Signature1; /*0x08 */
- U32 Signature2; /*0x0C */
- MPI2_VERSION_UNION MPIVersion; /*0x10 */
- MPI2_VERSION_UNION FWVersion; /*0x14 */
- MPI2_VERSION_UNION NVDATAVersion; /*0x18 */
- MPI2_VERSION_UNION PackageVersion; /*0x1C */
- U16 VendorID; /*0x20 */
- U16 ProductID; /*0x22 */
- U16 ProtocolFlags; /*0x24 */
- U16 Reserved26; /*0x26 */
- U32 IOCCapabilities; /*0x28 */
- U32 ImageSize; /*0x2C */
- U32 NextImageHeaderOffset; /*0x30 */
- U32 Checksum; /*0x34 */
- U32 Reserved38; /*0x38 */
- U32 Reserved3C; /*0x3C */
- U32 Reserved40; /*0x40 */
- U32 Reserved44; /*0x44 */
- U32 Reserved48; /*0x48 */
- U32 Reserved4C; /*0x4C */
- U32 Reserved50; /*0x50 */
- U32 Reserved54; /*0x54 */
- U32 Reserved58; /*0x58 */
- U32 Reserved5C; /*0x5C */
- U32 BootFlags; /*0x60 */
- U32 FirmwareVersionNameWhat; /*0x64 */
- U8 FirmwareVersionName[32]; /*0x68 */
- U32 VendorNameWhat; /*0x88 */
- U8 VendorName[32]; /*0x8C */
- U32 PackageNameWhat; /*0x88 */
- U8 PackageName[32]; /*0x8C */
- U32 ReservedD0; /*0xD0 */
- U32 ReservedD4; /*0xD4 */
- U32 ReservedD8; /*0xD8 */
- U32 ReservedDC; /*0xDC */
- U32 ReservedE0; /*0xE0 */
- U32 ReservedE4; /*0xE4 */
- U32 ReservedE8; /*0xE8 */
- U32 ReservedEC; /*0xEC */
- U32 ReservedF0; /*0xF0 */
- U32 ReservedF4; /*0xF4 */
- U32 ReservedF8; /*0xF8 */
- U32 ReservedFC; /*0xFC */
-} MPI2_FW_IMAGE_HEADER, *PTR_MPI2_FW_IMAGE_HEADER,
- Mpi2FWImageHeader_t, *pMpi2FWImageHeader_t;
-
-/*Signature field */
-#define MPI2_FW_HEADER_SIGNATURE_OFFSET (0x00)
-#define MPI2_FW_HEADER_SIGNATURE_MASK (0xFF000000)
-#define MPI2_FW_HEADER_SIGNATURE (0xEA000000)
-#define MPI26_FW_HEADER_SIGNATURE (0xEB000000)
-
-/*Signature0 field */
-#define MPI2_FW_HEADER_SIGNATURE0_OFFSET (0x04)
-#define MPI2_FW_HEADER_SIGNATURE0 (0x5AFAA55A)
-/* Last byte is defined by architecture */
-#define MPI26_FW_HEADER_SIGNATURE0_BASE (0x5AEAA500)
-#define MPI26_FW_HEADER_SIGNATURE0_ARC_0 (0x5A)
-#define MPI26_FW_HEADER_SIGNATURE0_ARC_1 (0x00)
-#define MPI26_FW_HEADER_SIGNATURE0_ARC_2 (0x01)
-/* legacy (0x5AEAA55A) */
-#define MPI26_FW_HEADER_SIGNATURE0_ARC_3 (0x02)
-#define MPI26_FW_HEADER_SIGNATURE0 \
- (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_0)
-#define MPI26_FW_HEADER_SIGNATURE0_3516 \
- (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_1)
-#define MPI26_FW_HEADER_SIGNATURE0_4008 \
- (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_3)
-
-/*Signature1 field */
-#define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08)
-#define MPI2_FW_HEADER_SIGNATURE1 (0xA55AFAA5)
-#define MPI26_FW_HEADER_SIGNATURE1 (0xA55AEAA5)
-
-/*Signature2 field */
-#define MPI2_FW_HEADER_SIGNATURE2_OFFSET (0x0C)
-#define MPI2_FW_HEADER_SIGNATURE2 (0x5AA55AFA)
-#define MPI26_FW_HEADER_SIGNATURE2 (0x5AA55AEA)
-
-/*defines for using the ProductID field */
-#define MPI2_FW_HEADER_PID_TYPE_MASK (0xF000)
-#define MPI2_FW_HEADER_PID_TYPE_SAS (0x2000)
-
-#define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00)
-#define MPI2_FW_HEADER_PID_PROD_A (0x0000)
-#define MPI2_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI (0x0200)
-#define MPI2_FW_HEADER_PID_PROD_IR_SCSI (0x0700)
-
-#define MPI2_FW_HEADER_PID_FAMILY_MASK (0x00FF)
-/*SAS ProductID Family bits */
-#define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0013)
-#define MPI2_FW_HEADER_PID_FAMILY_2208_SAS (0x0014)
-#define MPI25_FW_HEADER_PID_FAMILY_3108_SAS (0x0021)
-#define MPI26_FW_HEADER_PID_FAMILY_3324_SAS (0x0028)
-#define MPI26_FW_HEADER_PID_FAMILY_3516_SAS (0x0031)
-
-/*use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */
-
-/*use MPI2_IOCFACTS_CAPABILITY_ defines for IOCCapabilities field */
-
-#define MPI2_FW_HEADER_IMAGESIZE_OFFSET (0x2C)
-#define MPI2_FW_HEADER_NEXTIMAGE_OFFSET (0x30)
-#define MPI26_FW_HEADER_BOOTFLAGS_OFFSET (0x60)
-#define MPI2_FW_HEADER_VERNMHWAT_OFFSET (0x64)
-
-#define MPI2_FW_HEADER_WHAT_SIGNATURE (0x29232840)
-
-#define MPI2_FW_HEADER_SIZE (0x100)
-
-/*Extended Image Header */
-typedef struct _MPI2_EXT_IMAGE_HEADER {
- U8 ImageType; /*0x00 */
- U8 Reserved1; /*0x01 */
- U16 Reserved2; /*0x02 */
- U32 Checksum; /*0x04 */
- U32 ImageSize; /*0x08 */
- U32 NextImageHeaderOffset; /*0x0C */
- U32 PackageVersion; /*0x10 */
- U32 Reserved3; /*0x14 */
- U32 Reserved4; /*0x18 */
- U32 Reserved5; /*0x1C */
- U8 IdentifyString[32]; /*0x20 */
-} MPI2_EXT_IMAGE_HEADER, *PTR_MPI2_EXT_IMAGE_HEADER,
- Mpi2ExtImageHeader_t, *pMpi2ExtImageHeader_t;
-
-/*useful offsets */
-#define MPI2_EXT_IMAGE_IMAGETYPE_OFFSET (0x00)
-#define MPI2_EXT_IMAGE_IMAGESIZE_OFFSET (0x08)
-#define MPI2_EXT_IMAGE_NEXTIMAGE_OFFSET (0x0C)
-
-#define MPI2_EXT_IMAGE_HEADER_SIZE (0x40)
-
-/*defines for the ImageType field */
-#define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED (0x00)
-#define MPI2_EXT_IMAGE_TYPE_FW (0x01)
-#define MPI2_EXT_IMAGE_TYPE_NVDATA (0x03)
-#define MPI2_EXT_IMAGE_TYPE_BOOTLOADER (0x04)
-#define MPI2_EXT_IMAGE_TYPE_INITIALIZATION (0x05)
-#define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT (0x06)
-#define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07)
-#define MPI2_EXT_IMAGE_TYPE_MEGARAID (0x08)
-#define MPI2_EXT_IMAGE_TYPE_ENCRYPTED_HASH (0x09)
-#define MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC (0x80)
-#define MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC (0xFF)
-
-#define MPI2_EXT_IMAGE_TYPE_MAX (MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC)
-
-/*FLASH Layout Extended Image Data */
-
-/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check RegionsPerLayout at runtime.
- */
-#ifndef MPI2_FLASH_NUMBER_OF_REGIONS
-#define MPI2_FLASH_NUMBER_OF_REGIONS (1)
-#endif
-
-/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check NumberOfLayouts at runtime.
- */
-#ifndef MPI2_FLASH_NUMBER_OF_LAYOUTS
-#define MPI2_FLASH_NUMBER_OF_LAYOUTS (1)
-#endif
-
-typedef struct _MPI2_FLASH_REGION {
- U8 RegionType; /*0x00 */
- U8 Reserved1; /*0x01 */
- U16 Reserved2; /*0x02 */
- U32 RegionOffset; /*0x04 */
- U32 RegionSize; /*0x08 */
- U32 Reserved3; /*0x0C */
-} MPI2_FLASH_REGION, *PTR_MPI2_FLASH_REGION,
- Mpi2FlashRegion_t, *pMpi2FlashRegion_t;
-
-typedef struct _MPI2_FLASH_LAYOUT {
- U32 FlashSize; /*0x00 */
- U32 Reserved1; /*0x04 */
- U32 Reserved2; /*0x08 */
- U32 Reserved3; /*0x0C */
- MPI2_FLASH_REGION Region[MPI2_FLASH_NUMBER_OF_REGIONS]; /*0x10 */
-} MPI2_FLASH_LAYOUT, *PTR_MPI2_FLASH_LAYOUT,
- Mpi2FlashLayout_t, *pMpi2FlashLayout_t;
-
-typedef struct _MPI2_FLASH_LAYOUT_DATA {
- U8 ImageRevision; /*0x00 */
- U8 Reserved1; /*0x01 */
- U8 SizeOfRegion; /*0x02 */
- U8 Reserved2; /*0x03 */
- U16 NumberOfLayouts; /*0x04 */
- U16 RegionsPerLayout; /*0x06 */
- U16 MinimumSectorAlignment; /*0x08 */
- U16 Reserved3; /*0x0A */
- U32 Reserved4; /*0x0C */
- MPI2_FLASH_LAYOUT Layout[MPI2_FLASH_NUMBER_OF_LAYOUTS]; /*0x10 */
-} MPI2_FLASH_LAYOUT_DATA, *PTR_MPI2_FLASH_LAYOUT_DATA,
- Mpi2FlashLayoutData_t, *pMpi2FlashLayoutData_t;
-
-/*defines for the RegionType field */
-#define MPI2_FLASH_REGION_UNUSED (0x00)
-#define MPI2_FLASH_REGION_FIRMWARE (0x01)
-#define MPI2_FLASH_REGION_BIOS (0x02)
-#define MPI2_FLASH_REGION_NVDATA (0x03)
-#define MPI2_FLASH_REGION_FIRMWARE_BACKUP (0x05)
-#define MPI2_FLASH_REGION_MFG_INFORMATION (0x06)
-#define MPI2_FLASH_REGION_CONFIG_1 (0x07)
-#define MPI2_FLASH_REGION_CONFIG_2 (0x08)
-#define MPI2_FLASH_REGION_MEGARAID (0x09)
-#define MPI2_FLASH_REGION_COMMON_BOOT_BLOCK (0x0A)
-#define MPI2_FLASH_REGION_INIT (MPI2_FLASH_REGION_COMMON_BOOT_BLOCK)
-#define MPI2_FLASH_REGION_CBB_BACKUP (0x0D)
-#define MPI2_FLASH_REGION_SBR (0x0E)
-#define MPI2_FLASH_REGION_SBR_BACKUP (0x0F)
-#define MPI2_FLASH_REGION_HIIM (0x10)
-#define MPI2_FLASH_REGION_HIIA (0x11)
-#define MPI2_FLASH_REGION_CTLR (0x12)
-#define MPI2_FLASH_REGION_IMR_FIRMWARE (0x13)
-#define MPI2_FLASH_REGION_MR_NVDATA (0x14)
-
-/*ImageRevision */
-#define MPI2_FLASH_LAYOUT_IMAGE_REVISION (0x00)
-
-/*Supported Devices Extended Image Data */
-
-/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check NumberOfDevices at runtime.
- */
-#ifndef MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES
-#define MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES (1)
-#endif
-
-typedef struct _MPI2_SUPPORTED_DEVICE {
- U16 DeviceID; /*0x00 */
- U16 VendorID; /*0x02 */
- U16 DeviceIDMask; /*0x04 */
- U16 Reserved1; /*0x06 */
- U8 LowPCIRev; /*0x08 */
- U8 HighPCIRev; /*0x09 */
- U16 Reserved2; /*0x0A */
- U32 Reserved3; /*0x0C */
-} MPI2_SUPPORTED_DEVICE, *PTR_MPI2_SUPPORTED_DEVICE,
- Mpi2SupportedDevice_t, *pMpi2SupportedDevice_t;
-
-typedef struct _MPI2_SUPPORTED_DEVICES_DATA {
- U8 ImageRevision; /*0x00 */
- U8 Reserved1; /*0x01 */
- U8 NumberOfDevices; /*0x02 */
- U8 Reserved2; /*0x03 */
- U32 Reserved3; /*0x04 */
- MPI2_SUPPORTED_DEVICE
- SupportedDevice[MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES];/*0x08 */
-} MPI2_SUPPORTED_DEVICES_DATA, *PTR_MPI2_SUPPORTED_DEVICES_DATA,
- Mpi2SupportedDevicesData_t, *pMpi2SupportedDevicesData_t;
-
-/*ImageRevision */
-#define MPI2_SUPPORTED_DEVICES_IMAGE_REVISION (0x00)
-
-/*Init Extended Image Data */
-
-typedef struct _MPI2_INIT_IMAGE_FOOTER {
- U32 BootFlags; /*0x00 */
- U32 ImageSize; /*0x04 */
- U32 Signature0; /*0x08 */
- U32 Signature1; /*0x0C */
- U32 Signature2; /*0x10 */
- U32 ResetVector; /*0x14 */
-} MPI2_INIT_IMAGE_FOOTER, *PTR_MPI2_INIT_IMAGE_FOOTER,
- Mpi2InitImageFooter_t, *pMpi2InitImageFooter_t;
-
-/*defines for the BootFlags field */
-#define MPI2_INIT_IMAGE_BOOTFLAGS_OFFSET (0x00)
-
-/*defines for the ImageSize field */
-#define MPI2_INIT_IMAGE_IMAGESIZE_OFFSET (0x04)
-
-/*defines for the Signature0 field */
-#define MPI2_INIT_IMAGE_SIGNATURE0_OFFSET (0x08)
-#define MPI2_INIT_IMAGE_SIGNATURE0 (0x5AA55AEA)
-
-/*defines for the Signature1 field */
-#define MPI2_INIT_IMAGE_SIGNATURE1_OFFSET (0x0C)
-#define MPI2_INIT_IMAGE_SIGNATURE1 (0xA55AEAA5)
-
-/*defines for the Signature2 field */
-#define MPI2_INIT_IMAGE_SIGNATURE2_OFFSET (0x10)
-#define MPI2_INIT_IMAGE_SIGNATURE2 (0x5AEAA55A)
-
-/*Signature fields as individual bytes */
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_0 (0xEA)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_1 (0x5A)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_2 (0xA5)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_3 (0x5A)
-
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_4 (0xA5)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_5 (0xEA)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_6 (0x5A)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_7 (0xA5)
-
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_8 (0x5A)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_9 (0xA5)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_A (0xEA)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_B (0x5A)
-
-/*defines for the ResetVector field */
-#define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET (0x14)
-
-
-/* Encrypted Hash Extended Image Data */
-
-typedef struct _MPI25_ENCRYPTED_HASH_ENTRY {
- U8 HashImageType; /* 0x00 */
- U8 HashAlgorithm; /* 0x01 */
- U8 EncryptionAlgorithm; /* 0x02 */
- U8 Reserved1; /* 0x03 */
- U32 Reserved2; /* 0x04 */
- U32 EncryptedHash[1]; /* 0x08 */ /* variable length */
-} MPI25_ENCRYPTED_HASH_ENTRY, *PTR_MPI25_ENCRYPTED_HASH_ENTRY,
-Mpi25EncryptedHashEntry_t, *pMpi25EncryptedHashEntry_t;
-
-/* values for HashImageType */
-#define MPI25_HASH_IMAGE_TYPE_UNUSED (0x00)
-#define MPI25_HASH_IMAGE_TYPE_FIRMWARE (0x01)
-#define MPI25_HASH_IMAGE_TYPE_BIOS (0x02)
-
-/* values for HashAlgorithm */
-#define MPI25_HASH_ALGORITHM_UNUSED (0x00)
-#define MPI25_HASH_ALGORITHM_SHA256 (0x01)
-
-/* values for EncryptionAlgorithm */
-#define MPI25_ENCRYPTION_ALG_UNUSED (0x00)
-#define MPI25_ENCRYPTION_ALG_RSA256 (0x01)
-
-typedef struct _MPI25_ENCRYPTED_HASH_DATA {
- U8 ImageVersion; /* 0x00 */
- U8 NumHash; /* 0x01 */
- U16 Reserved1; /* 0x02 */
- U32 Reserved2; /* 0x04 */
- MPI25_ENCRYPTED_HASH_ENTRY EncryptedHashEntry[1]; /* 0x08 */
-} MPI25_ENCRYPTED_HASH_DATA, *PTR_MPI25_ENCRYPTED_HASH_DATA,
-Mpi25EncryptedHashData_t, *pMpi25EncryptedHashData_t;
-
/****************************************************************************
* PowerManagementControl message
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_pci.h b/drivers/scsi/mpt3sas/mpi/mpi2_pci.h
index f0281f9..63a0950 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_pci.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_pci.h
@@ -1,12 +1,12 @@
/*
- * Copyright 2012-2015 Avago Technologies. All rights reserved.
+ * Copyright 2000-2020 Broadcom Inc. All rights reserved.
*
*
* Name: mpi2_pci.h
* Title: MPI PCIe Attached Devices structures and definitions.
* Creation Date: October 9, 2012
*
- * mpi2_pci.h Version: 02.00.02
+ * mpi2_pci.h Version: 02.00.03
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -23,6 +23,7 @@
* Removed SOP support.
* 07-01-16 02.00.02 Added MPI26_NVME_FLAGS_FORCE_ADMIN_ERR_RESP to
* NVME Encapsulated Request.
+ * 07-22-18 02.00.03 Updted flags field for NVME Encapsulated req
* --------------------------------------------------------------------------
*/
@@ -75,10 +76,10 @@ typedef struct _MPI26_NVME_ENCAPSULATED_REQUEST {
#define MPI26_NVME_FLAGS_SUBMISSIONQ_ADMIN (0x0010)
/*Error Response Address Space */
#define MPI26_NVME_FLAGS_MASK_ERROR_RSP_ADDR (0x000C)
+#define MPI26_NVME_FLAGS_MASK_ERROR_RSP_ADDR_MASK (0x000C)
#define MPI26_NVME_FLAGS_SYSTEM_RSP_ADDR (0x0000)
-#define MPI26_NVME_FLAGS_IOCPLB_RSP_ADDR (0x0008)
-#define MPI26_NVME_FLAGS_IOCPLBNTA_RSP_ADDR (0x000C)
-/*Data Direction*/
+#define MPI26_NVME_FLAGS_IOCCTL_RSP_ADDR (0x0008)
+/* Data Direction*/
#define MPI26_NVME_FLAGS_DATADIRECTION_MASK (0x0003)
#define MPI26_NVME_FLAGS_NODATATRANSFER (0x0000)
#define MPI26_NVME_FLAGS_WRITE (0x0001)
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_raid.h b/drivers/scsi/mpt3sas/mpi/mpi2_raid.h
index b9bb1c1..b770eb5 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_raid.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_raid.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
- * Copyright 2000-2014 Avago Technologies. All rights reserved.
+ * Copyright 2000-2020 Broadcom Inc. All rights reserved.
*
*
* Name: mpi2_raid.h
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_sas.h b/drivers/scsi/mpt3sas/mpi/mpi2_sas.h
index afa17ff..16c922a 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_sas.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_sas.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
- * Copyright 2000-2015 Avago Technologies. All rights reserved.
+ * Copyright 2000-2020 Broadcom Inc. All rights reserved.
*
*
* Name: mpi2_sas.h
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_tool.h b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h
index 629296e..3f966b6 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_tool.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h
@@ -1,13 +1,13 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
- * Copyright 2000-2014 Avago Technologies. All rights reserved.
+ * Copyright 2000-2020 Broadcom Inc. All rights reserved.
*
*
* Name: mpi2_tool.h
* Title: MPI diagnostic tool structures and definitions
* Creation Date: March 26, 2007
*
- * mpi2_tool.h Version: 02.00.14
+ * mpi2_tool.h Version: 02.00.15
*
* Version History
* ---------------
@@ -38,6 +38,8 @@
* 11-18-14 02.00.13 Updated copyright information.
* 08-25-16 02.00.14 Added new values for the Flags field of Toolbox Clean
* Tool Request Message.
+ * 07-22-18 02.00.15 Added defines for new TOOLBOX_PCIE_LANE_MARGINING tool.
+ * Added option for DeviceInfo field in ISTWI tool.
* --------------------------------------------------------------------------
*/
@@ -58,6 +60,7 @@
#define MPI2_TOOLBOX_BEACON_TOOL (0x05)
#define MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL (0x06)
#define MPI2_TOOLBOX_TEXT_DISPLAY_TOOL (0x07)
+#define MPI26_TOOLBOX_BACKEND_PCIE_LANE_MARGIN (0x08)
/****************************************************************************
* Toolbox reply
@@ -226,6 +229,13 @@ typedef struct _MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST {
#define MPI2_TOOL_ISTWI_FLAG_AUTO_RESERVE_RELEASE (0x80)
#define MPI2_TOOL_ISTWI_FLAG_PAGE_ADDR_MASK (0x07)
+/*MPI26 TOOLBOX Request MsgFlags defines */
+#define MPI26_TOOLBOX_REQ_MSGFLAGS_ADDRESSING_MASK (0x01)
+/*Request uses Man Page 43 device index addressing */
+#define MPI26_TOOLBOX_REQ_MSGFLAGS_ADDRESSING_DEVINDEX (0x00)
+/*Request uses Man Page 43 device info struct addressing */
+#define MPI26_TOOLBOX_REQ_MSGFLAGS_ADDRESSING_DEVINFO (0x01)
+
/*Toolbox ISTWI Read Write Tool reply message */
typedef struct _MPI2_TOOLBOX_ISTWI_REPLY {
U8 Tool; /*0x00 */
@@ -387,6 +397,64 @@ Mpi2ToolboxTextDisplayRequest_t,
#define MPI2_TOOLBOX_CONSOLE_FLAG_TIMESTAMP (0x01)
+/***************************************************************************
+ * Toolbox Backend Lane Margining Tool
+ ***************************************************************************
+ */
+
+/*Toolbox Backend Lane Margining Tool request message */
+typedef struct _MPI26_TOOLBOX_LANE_MARGINING_REQUEST {
+ U8 Tool; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U8 Command; /*0x0C */
+ U8 SwitchPort; /*0x0D */
+ U16 DevHandle; /*0x0E */
+ U8 RegisterOffset; /*0x10 */
+ U8 Reserved5; /*0x11 */
+ U16 DataLength; /*0x12 */
+ MPI25_SGE_IO_UNION SGL; /*0x14 */
+} MPI26_TOOLBOX_LANE_MARGINING_REQUEST,
+ *PTR_MPI2_TOOLBOX_LANE_MARGINING_REQUEST,
+ Mpi26ToolboxLaneMarginingRequest_t,
+ *pMpi2ToolboxLaneMarginingRequest_t;
+
+/* defines for the Command field */
+#define MPI26_TOOL_MARGIN_COMMAND_ENTER_MARGIN_MODE (0x01)
+#define MPI26_TOOL_MARGIN_COMMAND_READ_REGISTER_DATA (0x02)
+#define MPI26_TOOL_MARGIN_COMMAND_WRITE_REGISTER_DATA (0x03)
+#define MPI26_TOOL_MARGIN_COMMAND_EXIT_MARGIN_MODE (0x04)
+
+
+/*Toolbox Backend Lane Margining Tool reply message */
+typedef struct _MPI26_TOOLBOX_LANE_MARGINING_REPLY {
+ U8 Tool; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U16 Reserved5; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+ U16 ReturnedDataLength; /*0x14 */
+ U16 Reserved6; /*0x16 */
+} MPI26_TOOLBOX_LANE_MARGINING_REPLY,
+ *PTR_MPI26_TOOLBOX_LANE_MARGINING_REPLY,
+ Mpi26ToolboxLaneMarginingReply_t,
+ *pMpi26ToolboxLaneMarginingReply_t;
+
/*****************************************************************************
*
--
1.8.3.1