RE: [PATCH 3/6] PCI: layerscape: Add the EP mode support

[Xiaowei Bao]

-----Original Message-----
From: Li Yang <leoyang.li@xxxxxxx> 
Sent: 2018å10æ27æ 4:29
To: Xiaowei Bao <xiaowei.bao@xxxxxxx>
Cc: Arnd Bergmann <arnd@xxxxxxxx>; Rob Herring <robh@xxxxxxxxxx>; Bjorn Helgaas <bhelgaas@xxxxxxxxxx>; Mark Rutland <mark.rutland@xxxxxxx>; Shawn Guo <shawnguo@xxxxxxxxxx>; kishon@xxxxxx; lorenzo.pieralisi@xxxxxxx; Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>; M.h. Lian <minghuan.lian@xxxxxxx>; Mingkai Hu <mingkai.hu@xxxxxxx>; Roy Zang <roy.zang@xxxxxxx>; Kate Stewart <kstewart@xxxxxxxxxxxxxxxxxxx>; cyrille.pitchen@xxxxxxxxxxxxxxxxxx; Philippe Ombredanne <pombredanne@xxxxxxxx>; shawn.lin@xxxxxxxxxxxxxx; niklas.cassel@xxxxxxxx; linux-pci@xxxxxxxxxxxxxxx; open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS <devicetree@xxxxxxxxxxxxxxx>; lkml <linux-kernel@xxxxxxxxxxxxxxx>; moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE <linux-arm-kernel@xxxxxxxxxxxxxxxxxxx>; linuxppc-dev <linuxppc-dev@xxxxxxxxxxxxxxxx>
Subject: Re: [PATCH 3/6] PCI: layerscape: Add the EP mode support

On Fri, Oct 26, 2018 at 2:43 AM Xiaowei Bao <xiaowei.bao@xxxxxxx> wrote:
>
>
>
> -----Original Message-----
> From: arndbergmann@xxxxxxxxx <arndbergmann@xxxxxxxxx> On Behalf Of 
> Arnd Bergmann
> Sent: 2018å10æ26æ 15:01
> To: Xiaowei Bao <xiaowei.bao@xxxxxxx>
> Cc: Rob Herring <robh@xxxxxxxxxx>; bhelgaas@xxxxxxxxxx; 
> mark.rutland@xxxxxxx; shawnguo@xxxxxxxxxx; Leo Li 
> <leoyang.li@xxxxxxx>; kishon@xxxxxx; lorenzo.pieralisi@xxxxxxx; 
> gregkh@xxxxxxxxxxxxxxxxxxx; M.h. Lian <minghuan.lian@xxxxxxx>; Mingkai 
> Hu <mingkai.hu@xxxxxxx>; Roy Zang <roy.zang@xxxxxxx>; 
> kstewart@xxxxxxxxxxxxxxxxxxx; cyrille.pitchen@xxxxxxxxxxxxxxxxxx; 
> pombredanne@xxxxxxxx; shawn.lin@xxxxxxxxxxxxxx; 
> niklas.cassel@xxxxxxxx; linux-pci@xxxxxxxxxxxxxxx; 
> devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; 
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linuxppc-dev@xxxxxxxxxxxxxxxx
> Subject: Re: [PATCH 3/6] PCI: layerscape: Add the EP mode support
>
> On 10/26/18, Xiaowei Bao <xiaowei.bao@xxxxxxx> wrote:
> > From: Rob Herring <robh@xxxxxxxxxx>
> >> On Thu, Oct 25, 2018 at 07:08:58PM +0800, Xiaowei Bao wrote:
> >>>          "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie"
> >>>          "fsl,ls2088a-pcie"
> >>>          "fsl,ls1088a-pcie"
> >>>          "fsl,ls1046a-pcie"
> >>>          "fsl,ls1012a-pcie
> >>> +  EP mode:
> >>> +        "fsl,ls-pcie-ep"
> >>
> > > You need SoC specific compatibles for the same reasons as the RC.
> >
> > [Xiaowei Bao] I want to contains all layerscape platform use one 
> > compatible if the PCIe controller work in EP mode.
>
> Do you mean only one of the SoCs that support RC mode has EP mode?
> I think you still need a SoC specific compatible as Rob explained, in case there will be a second one in the future.
>
> If you want to ensure that you don't have to update the device driver for each new chip that comes in when the EP mode is compatible, the way this is handled is to list multiple values in the compatible property, listing the first SoC that introduced the specific version of that IP block as the most generic type, e.g.
>
>   copatible = "fsl,ls2088a-pcie-ep", "fsl,ls1012a-pcie-ep", 
> "snps,dw-pcie-ep";
>
> For consistency, it probably is best to match each RC mode value with the corresponding EP mode string for each device that can support both (if there is more than one).
>
>       Arnd
> [Xiaowei Bao] My mean is that the ls-pcie-ep compatibles will contain all layerscape SOCs of NXP, e.g: ls1046a-pcie-ep, fsl,ls2088a-pcie-ep, ls2088a-pcie-ep and so on, other layerscape SOCs have not test except the ls1046a, I think it is compatible if the new chip or other SOCs use the DW core, OK, I will discuss this issue internally, and reply to you later.

You can define a generic compatible string for the EP mode of all these platforms.  But like Rob and Arnd mentioned, it is good to also define the SoC specific compatible strings just in case that we need special treatment for certain SoCs in the future.

Regards,
Leo

[Xiaowei Bao] Hi Leo, OK, I will add the SoC specific compatible strings in patch-v2, thanks a lot.