Re: [PATCH] dts: sun8i-h3: Add DTS for Mapleboard MP130

[Maxime Ripard]

Hi Jonathan,

Thanks for your patch.

On Thu, Oct 25, 2018 at 08:55:19PM +0100, Jonathan McDowell wrote:
> 
> The Mapleboard MP130 is a single board computer based on the Allwinner
> H3 SoC, with all schematics freely available. The Lite version includes
> 1GB main memory and 8GB eMMC.
> 
> https://www.mapleboard.org/en (still mostly in Chinese even when English
> is selected)
> 
> This DTS is based upon the DTS shipped with the board which uses
> mapleboard,mp130- prefixes instead of the allwinner,sun8i variants.
> 
> Signed-off-by: Jonathan McDowell <noodles@xxxxxxxx>

The prefix of your patch should be "ARM: dts: sun8i-h3: ..."

> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index b5bd3de87c33..dcf1b9e7f71e 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1035,6 +1035,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
>  	sun8i-h3-bananapi-m2-plus.dtb \
>  	sun8i-h3-beelink-x2.dtb \
>  	sun8i-h3-libretech-all-h3-cc.dtb \
> +	sun8i-h3-mapleboard-mp130.dtb \
>  	sun8i-h3-nanopi-m1.dtb	\
>  	sun8i-h3-nanopi-m1-plus.dtb \
>  	sun8i-h3-nanopi-neo.dtb \
> diff --git a/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts b/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts
> new file mode 100644
> index 000000000000..bf948128af94
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts
> @@ -0,0 +1,179 @@
> +/*
> + * Copyright (C) 2017 Centrum Embedded Systems, Jia-Bin Huang <jb@xxxxxxxxxx>
> + * Copyright (C) 2018 Jonathan McDowell <noodles@xxxxxxxx>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.

You should add a SPDX tag instead of the license.

We're also trying to license the DT under a dual GPL/MIT license,
since they can be used by projects under a license that is not the
GPL. But that's your call, obviously.

> + */
> +
> +/dts-v1/;
> +#include "sun8i-h3.dtsi"
> +#include "sunxi-common-regulators.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> +	model = "MapleBoard MP130 Board";
> +	compatible = "mapleboard,mp130_board", "allwinner,sun8i-h3";

The "board" in both the model and compatible is redundant.

> +
> +	aliases {
> +		ethernet0 = &emac;
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&leds_pio>, <&leds_r_pio>;

You can drop those pinctrl nodes

> +		pwr_led {
> +			label = "mp130_board:orange:pwr";
> +			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
> +			default-state = "on";
> +		};

A new line here would be nice

> +		status_led {
> +			label = "mp130_board:orange:status";
> +			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
> +		};
> +	};
> +
> +	r_gpio_keys {
> +		compatible = "gpio-keys";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&sw_r_pio>;

Samething the pinctrl reference can be dropped

> +		power {
> +			label = "power";
> +			linux,code = <KEY_POWER>;
> +			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */
> +		};
> +
> +		user {
> +			label = "user";
> +			linux,code = <BTN_0>;
> +			gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
> +		};

The labels should be under the form "board:color:function"

> +	};
> +};
> +
> +&codec {
> +	allwinner,audio-routing =
> +		"Line Out", "LINEOUT",
> +		"LINEIN", "Line In";
> +	status = "okay";
> +};
> +
> +&ehci1 {
> +	status = "okay";
> +};
> +
> +&ehci2 {
> +	status = "okay";
> +};
> +
> +&ehci3 {
> +	status = "okay";
> +};
> +
> +&ir {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&ir_pins_a>;
> +	status = "okay";
> +};
> +
> +&mmc0 {
> +	vmmc-supply = <&reg_vcc3v3>;
> +	bus-width = <4>;
> +	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
> +	cd-inverted;
> +	status = "okay";
> +};
> +
> +&mmc2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc2_8bit_pins>;
> +	vmmc-supply = <&reg_vcc3v3>;
> +	bus-width = <8>;
> +	non-removable;
> +	cap-mmc-hw-reset;
> +	status = "okay";
> +};
> +
> +&ohci1 {
> +	status = "okay";
> +};
> +
> +&ohci2 {
> +	status = "okay";
> +};
> +
> +&ohci3 {
> +	status = "okay";
> +};
> +
> +&pio {
> +	leds_pio: led_pins {
> +		pins = "PA15";
> +		function = "gpio_out";
> +	};
> +};
> +
> +&r_pio {
> +	leds_r_pio: led_pins {
> +		pins = "PL10";
> +		function = "gpio_out";
> +	};
> +
> +	sw_r_pio: key_pins {
> +		pins = "PL3", "PL4";
> +		function = "gpio_in";
> +	};
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart0_pins_a>;
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart1_pins>;
> +	status = "disabled";
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart2_pins>;
> +	status = "disabled";
> +};
> +
> +&uart3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart3_pins>;
> +	status = "disabled";
> +};
> +
> +&usb_otg {
> +	dr_mode = "peripheral";
> +	status = "okay";
> +};
> +
> +&usbphy {
> +	/* USB VBUS is always on */
> +	status = "okay";
> +};
> +
> +&emac {
> +	phy-handle = <&int_mii_phy>;
> +	phy-mode = "mii";
> +	allwinner,leds-active-low;
> +	status = "okay";
> +};
> +

This should be ordered alphabetically

> J.
> 
> -- 
> Revd Jonathan McDowell, ULC | Do you believe in happy endings?

Please don't send patches through your mailer. git send-email can be
configured to send the patches directly, this should be your preferred
option.

Thanks!
Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Attachment: signature.asc
Description: PGP signature