Re: [PATCH] dvb: Allow MAC addresses to be mapped to stable device names with udev

[Mauro Carvalho Chehab]

Em Wed, 31 Oct 2018 15:51:40 +0000
David Howells <dhowells@xxxxxxxxxx> escreveu:

> David Howells <dhowells@xxxxxxxxxx> wrote:
> 
> > > > > Devices without a mac address shouldn't have a mac_dvb sysfs attribute,
> > > > > I think.  
> > > > 
> > > > I'm not sure that's possible within the core infrastructure.  It's a
> > > > class attribute set when the class is created; I'm not sure it can be
> > > > overridden on a per-device basis.
> > > > 
> > > > Possibly the file could return "" or "none" in this case?  
> > > 
> > > That's very ugly. Have a look at, for example, rc-core wakeup filters:
> > > 
> > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/media/rc/rc-main.c#n1844  
> > 
> > By analogy, then, I think the thing to do is to put something like struct
> > rc_dev::sysfs_groups[] into struct dvb_device (or maybe struct dvb_adapter)
> > and then the dvb_mac attribute in there during dvb_register_device() based on
> > whether or not the MAC address is not all zeros at that point.  
> 
> Hmmm...  This is trickier than it seems.  At the point the device struct is
> registered, the MAC address hasn't yet been read:
> 
> [   13.865905] cx23885: CORE cx23885[1]: subsystem: 4254:0952, board: DVBSky S952 [card=50,autodetected]
> [   14.095559] cx25840 8-0044: cx23885 A/V decoder found @ 0x88 (cx23885[1])
> [   14.723127] cx25840 8-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
> [   14.738377] cx23885: cx23885_dvb_register() allocating 1 frontend(s)
> [   14.738378] cx23885: cx23885[1]: cx23885 based dvb card
> [   14.742536] i2c i2c-7: Added multiplexed i2c bus 9
> [   15.096912] ts2020 9-0060: Montage Technology TS2022 successfully identified
> [   15.096933] dvbdev: DVB: registering new adapter (cx23885[1])
> [   15.096936] cx23885 0000:06:00.0: DVB: registering adapter 2 frontend 0 (Montage Technology M88DS3103)...
> [   15.124665] cx23885: DVBSky S952 port 1 MAC address: 00:17:42:54:09:52
> [   15.124666] cx23885: cx23885_dvb_register() allocating 1 frontend(s)
> [   15.124674] cx23885: cx23885[1]: cx23885 based dvb card
> [   15.128860] i2c i2c-6: Added multiplexed i2c bus 10
> [   15.228172] ts2020 10-0060: Montage Technology TS2022 successfully identified
> [   15.228188] dvbdev: DVB: registering new adapter (cx23885[1])
> [   15.228190] cx23885 0000:06:00.0: DVB: registering adapter 3 frontend 0 (Montage Technology M88DS3103)...
> [   15.255996] cx23885: DVBSky S952 port 2 MAC address: 00:17:42:54:09:53
> [   15.255999] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xa5
> [   15.256004] cx23885: cx23885[1]/0: found at 0000:06:00.0, rev: 4, irq: 19, latency: 0, mmio: 0xf7a00000
> 
> The device structs are registered at 15.096936 and 15.228190 and this is the
> point by which I think I have to set the device::groups pointer.
> 
> However, the device isn't fully initialised at this point and the MAC address
> hasn't yet been read - and so the attribute doesn't appear.  proposed_mac is
> set right after lines 15.124665 and 15.255996.  Interestingly, a third of a
> second elapses between the device registration and the MAC being printed for
> each adapter.
> 
> Any suggestions?

Yeah, I was afraid about that. At V4L2 core, what we do is that we first
do everything, including firmware load, and only after having everything
setup, we register the char device.

I suspect it should be possible to do that too at dvb-usb and dvb-usb-v2,
but some work would be needed.

> 
> David
> ---
> diff --git a/drivers/media/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c
> index b7171bf094fb..edbfa5549994 100644
> --- a/drivers/media/dvb-core/dvbdev.c
> +++ b/drivers/media/dvb-core/dvbdev.c
> @@ -450,6 +450,23 @@ static int dvb_register_media_device(struct dvb_device *dvbdev,
>  	return 0;
>  }
>  
> +static ssize_t dvb_mac_show(struct device *dev,
> +			    struct device_attribute *attr, char *buf)
> +{
> +	struct dvb_device *dvbdev = dev_get_drvdata(dev);
> +
> +	return sprintf(buf, "%pM\n", dvbdev->adapter->proposed_mac);
> +}
> +static DEVICE_ATTR_RO(dvb_mac);
> +
> +static struct attribute *dvb_device_attrs[] = {
> +	&dev_attr_dvb_mac.attr,
> +	NULL
> +};
> +static const struct attribute_group dvb_device_attr_grp = {
> +	.attrs	= dvb_device_attrs,
> +};
> +
>  int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
>  			const struct dvb_device *template, void *priv,
>  			enum dvb_device_type type, int demux_sink_pads)
> @@ -533,6 +550,14 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
>  
>  	mutex_unlock(&dvbdev_register_lock);
>  
> +	if (adap->proposed_mac[0] || adap->proposed_mac[1] ||
> +	    adap->proposed_mac[2] || adap->proposed_mac[3] ||
> +	    adap->proposed_mac[4] || adap->proposed_mac[5]) {
> +		dvbdev->sysfs_groups[0] = &dvb_device_attr_grp;
> +		dvbdev->sysfs_groups[1] = NULL;
> +		adap->device->groups = dvbdev->sysfs_groups;
> +	}
> +
>  	clsdev = device_create(dvb_class, adap->device,
>  			       MKDEV(DVB_MAJOR, minor),
>  			       dvbdev, "dvb%d.%s%d", adap->num, dnames[type], id);
> @@ -1010,6 +1035,31 @@ void dvb_module_release(struct i2c_client *client)
>  EXPORT_SYMBOL_GPL(dvb_module_release);
>  #endif
>  
> +static ssize_t dvb_adapter_show(struct device *dev,
> +				struct device_attribute *attr, char *buf)
> +{
> +	struct dvb_device *dvbdev = dev_get_drvdata(dev);
> +
> +	return sprintf(buf, "%d\n", dvbdev->adapter->num);
> +}
> +static DEVICE_ATTR_RO(dvb_adapter);
> +
> +static ssize_t dvb_type_show(struct device *dev,
> +			     struct device_attribute *attr, char *buf)
> +{
> +	struct dvb_device *dvbdev = dev_get_drvdata(dev);
> +
> +	return sprintf(buf, "%s\n", dnames[dvbdev->type]);
> +}
> +static DEVICE_ATTR_RO(dvb_type);
> +
> +static struct attribute *dvb_class_attrs[] = {
> +	&dev_attr_dvb_adapter.attr,
> +	&dev_attr_dvb_type.attr,
> +	NULL
> +};
> +ATTRIBUTE_GROUPS(dvb_class);
> +
>  static int dvb_uevent(struct device *dev, struct kobj_uevent_env *env)
>  {
>  	struct dvb_device *dvbdev = dev_get_drvdata(dev);
> @@ -1050,6 +1100,7 @@ static int __init init_dvbdev(void)
>  		retval = PTR_ERR(dvb_class);
>  		goto error;
>  	}
> +	dvb_class->dev_groups = dvb_class_groups,
>  	dvb_class->dev_uevent = dvb_uevent;
>  	dvb_class->devnode = dvb_devnode;
>  	return 0;
> diff --git a/include/media/dvbdev.h b/include/media/dvbdev.h
> index 881ca461b7bb..d6becdd2d56e 100644
> --- a/include/media/dvbdev.h
> +++ b/include/media/dvbdev.h
> @@ -127,6 +127,7 @@ struct dvb_adapter {
>   *
>   * @list_head:	List head with all DVB devices
>   * @fops:	pointer to struct file_operations
> + * @sysfs_groups: Additional sysfs attributes
>   * @adapter:	pointer to the adapter that holds this device node
>   * @type:	type of the device, as defined by &enum dvb_device_type.
>   * @minor:	devnode minor number. Major number is always DVB_MAJOR.
> @@ -157,6 +158,7 @@ struct dvb_adapter {
>  struct dvb_device {
>  	struct list_head list_head;
>  	const struct file_operations *fops;
> +	const struct attribute_group *sysfs_groups[2];
>  	struct dvb_adapter *adapter;
>  	enum dvb_device_type type;
>  	int minor;



Thanks,
Mauro