[PATCH v2 1/2] dt-bindings: phy: Document cadence Sierra PHY bindings

From: Alan Douglas
Date: Wed Oct 31 2018 - 12:34:32 EST


Add DT binding documentation for Sierra PHY. The PHY supports
a number of different protocols, including PCIe and USB.

The PHY lanes may be configured as single or multi-lane links.
Each link is treated as a separate sub-node. For example, if
there are 4 lanes in total the first 2 might be configured as
a multi-lane PCIe link while the other two are single lane
USB links, and in this case there would be 3 sub-nodes.

There are two resets for the PHY block (one for APB register
access, one for the PHY link) and separate resets for each
link. For multi-lane links, the reset corresponds to the
reset line on the master lane, the resets on other lanes
have no effect.

Signed-off-by: Alan Douglas <adouglas@xxxxxxxxxxx>
---
.../devicetree/bindings/phy/cdns-sierra-phy.txt | 68 ++++++++++++++++++++++
1 file changed, 68 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/cdns-sierra-phy.txt

diff --git a/Documentation/devicetree/bindings/phy/cdns-sierra-phy.txt b/Documentation/devicetree/bindings/phy/cdns-sierra-phy.txt
new file mode 100644
index 0000000..67efdb4
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/cdns-sierra-phy.txt
@@ -0,0 +1,68 @@
+Cadence Sierra PHY
+-----------------------
+
+Required properties:
+- compatible: cdns,sierra-phy-t0
+- clocks: Must contain an entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Must be "phy_clk"
+- resets: Must contain an entry for each in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include "sierra_reset" and "sierra_apb".
+ "sierra_reset" must control the reset line to the PHY.
+ "sierra_apb" must control the reset line to the APB PHY
+ interface.
+- reg: register range for the PHY.
+- #address-cells: Must be 1
+- #size-cells: Must be 0
+
+Optional properties:
+- cdns,autoconf: A boolean property whose presence indicates that the
+ PHY registers will be configured by hardware. If not
+ present, all sub-node optional properties must be
+ provided.
+
+Sub-nodes:
+ Each group of PHY lanes with a single master lane should be represented as
+ a sub-node. Note that the actual configuration of each lane is determined by
+ hardware strapping, and must match the configuration specified here.
+
+Sub-node required properties:
+- #phy-cells: Generic PHY binding; must be 0.
+- reg: The master lane number. This is the lowest numbered lane
+ in the lane group.
+- resets: Must contain one entry which controls the reset line for the
+ master lane of the sub-node.
+ See ../reset/reset.txt for details.
+
+Sub-node optional properties:
+- cdns,num-lanes: Number of lanes in this group. From 1 to 4. The
+ group is made up of consecutive lanes.
+- cdns,phy-type: Can be PHY_TYPE_PCIE or PHY_TYPE_USB3, depending on
+ configuration of lanes.
+
+Example:
+ pcie_phy4: pcie-phy@fd240000 {
+ compatible = "cdns,sierra-phy-t0";
+ reg = <0x0 0xfd240000 0x0 0x40000>;
+ resets = <&phyrst 0>, <&phyrst 1>;
+ reset-names = "sierra_reset", "sierra_apb";
+ clocks = <&phyclock>;
+ clock-names = "phy_clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pcie0_phy0: pcie-phy@0 {
+ reg = <0>;
+ resets = <&phyrst 2>;
+ cdns,num-lanes = <2>;
+ #phy-cells = <0>;
+ cdns,phy-type = <PHY_TYPE_PCIE>;
+ };
+ pcie0_phy1: pcie-phy@2 {
+ reg = <2>;
+ resets = <&phyrst 4>;
+ cdns,num-lanes = <1>;
+ #phy-cells = <0>;
+ cdns,phy-type = <PHY_TYPE_PCIE>;
+ };
+
--
1.9.0