[PATCH 4.14 142/143] net: bcmgenet: Poll internal PHY for GENETv5

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Fainelli <f.fainelli@xxxxxxxxx>

[ Upstream commit 64bd9c8135751b561f27edaaffe93d07093f81af ]

On GENETv5, there is a hardware issue which prevents the GENET hardware
from generating a link UP interrupt when the link is operating at
10Mbits/sec. Since we do not have any way to configure the link
detection logic, fallback to polling in that case.

Fixes: 421380856d9c ("net: bcmgenet: add support for the GENETv5 hardware")
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/net/ethernet/broadcom/genet/bcmmii.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -339,9 +339,12 @@ int bcmgenet_mii_probe(struct net_device
 	phydev->advertising = phydev->supported;
 
 	/* The internal PHY has its link interrupts routed to the
-	 * Ethernet MAC ISRs
-	 */
-	if (priv->internal_phy)
+	 * Ethernet MAC ISRs. On GENETv5 there is a hardware issue
+	 * that prevents the signaling of link UP interrupts when
+	 * the link operates at 10Mbps, so fallback to polling for
+	 * those versions of GENET.
+ 	 */
+	if (priv->internal_phy && !GENET_IS_V5(priv))
 		priv->phydev->irq = PHY_IGNORE_INTERRUPT;
 
 	return 0;