Re: [PATCH v5 1/5] dt-bindings: phy-qcom-qmp: Fix register underspecification

[Stephen Boyd]

Quoting Evan Green (2018-10-26 10:35:40)
>                         (or)
> @@ -150,3 +153,54 @@ Example:
>                 ...
>                 ...
>         };
> +
> +       phy@88eb000 {
> +               compatible = "qcom,sdm845-qmp-usb3-uni-phy";
> +               reg = <0x88eb000 0x18c>;
> +               #clock-cells = <1>;
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +               ranges;
> +
> +               clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
> +                        <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
> +                        <&gcc GCC_USB3_SEC_CLKREF_CLK>,
> +                        <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
> +               clock-names = "aux", "cfg_ahb", "ref", "com_aux";
> +
> +               resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
> +                        <&gcc GCC_USB3_PHY_SEC_BCR>;
> +               reset-names = "phy", "common";
> +
> +               lane@88eb200 {
> +                       reg = <0x88eb200 0x128>,
> +                             <0x88eb400 0x1fc>,
> +                             <0x88eb800 0x218>,
> +                             <0x88eb600 0x70>;
> +                       #phy-cells = <0>;
> +                       clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
> +                       clock-names = "pipe0";
> +                       clock-output-names = "usb3_uni_phy_pipe_clk_src";

If this has clock-output-names then I would expect to see a #clock-cells
property, but that isn't here in this node. Are we relying on the same
property in the parent node?

> +               };
> +       };