Re: [PATCH 06/11] [media] marvell-ccic: drop ctlr_reset()

From: Pavel Machek
Date: Mon Nov 05 2018 - 04:11:42 EST


On Mon 2018-11-05 08:30:49, Lubomir Rintel wrote:
> This accesses the clock registers directly and thus is not too
> devicetree friendly. If it's actually needed it needs to be done
> differently.

Device-tree unfriendly is bad, but you still don't want to cause
regression to people needing this.

(Perhaps noone uses this, but...)

> Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>

Git blame says: 7c269f454 . Perhaps its authors should be Cced here,
too?
Pavel

> ---
> .../media/platform/marvell-ccic/mcam-core.c | 6 -----
> .../media/platform/marvell-ccic/mcam-core.h | 1 -
> .../media/platform/marvell-ccic/mmp-driver.c | 23 -------------------
> 3 files changed, 30 deletions(-)
>
> diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c
> index d24e5b7a3bc5..1b879035948c 100644
> --- a/drivers/media/platform/marvell-ccic/mcam-core.c
> +++ b/drivers/media/platform/marvell-ccic/mcam-core.c
> @@ -1154,12 +1154,6 @@ static void mcam_vb_stop_streaming(struct vb2_queue *vq)
> if (cam->state != S_STREAMING)
> return;
> mcam_ctlr_stop_dma(cam);
> - /*
> - * Reset the CCIC PHY after stopping streaming,
> - * otherwise, the CCIC may be unstable.
> - */
> - if (cam->ctlr_reset)
> - cam->ctlr_reset(cam);
> /*
> * VB2 reclaims the buffers, so we need to forget
> * about them.
> diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h b/drivers/media/platform/marvell-ccic/mcam-core.h
> index ad8955f9f0a1..f93f23faf364 100644
> --- a/drivers/media/platform/marvell-ccic/mcam-core.h
> +++ b/drivers/media/platform/marvell-ccic/mcam-core.h
> @@ -137,7 +137,6 @@ struct mcam_camera {
> int (*plat_power_up) (struct mcam_camera *cam);
> void (*plat_power_down) (struct mcam_camera *cam);
> void (*calc_dphy) (struct mcam_camera *cam);
> - void (*ctlr_reset) (struct mcam_camera *cam);
>
> /*
> * Everything below here is private to the mcam core and
> diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
> index 70a2833db0d1..92a79ad8a12c 100644
> --- a/drivers/media/platform/marvell-ccic/mmp-driver.c
> +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
> @@ -183,28 +183,6 @@ static void mmpcam_power_down(struct mcam_camera *mcam)
> mcam_clk_disable(mcam);
> }
>
> -static void mcam_ctlr_reset(struct mcam_camera *mcam)
> -{
> - unsigned long val;
> - struct mmp_camera *cam = mcam_to_cam(mcam);
> -
> - if (mcam->ccic_id) {
> - /*
> - * Using CCIC2
> - */
> - val = ioread32(cam->power_regs + REG_CCIC2_CRCR);
> - iowrite32(val & ~0x2, cam->power_regs + REG_CCIC2_CRCR);
> - iowrite32(val | 0x2, cam->power_regs + REG_CCIC2_CRCR);
> - } else {
> - /*
> - * Using CCIC1
> - */
> - val = ioread32(cam->power_regs + REG_CCIC_CRCR);
> - iowrite32(val & ~0x2, cam->power_regs + REG_CCIC_CRCR);
> - iowrite32(val | 0x2, cam->power_regs + REG_CCIC_CRCR);
> - }
> -}
> -
> /*
> * calc the dphy register values
> * There are three dphy registers being used.
> @@ -352,7 +330,6 @@ static int mmpcam_probe(struct platform_device *pdev)
> mcam = &cam->mcam;
> mcam->plat_power_up = mmpcam_power_up;
> mcam->plat_power_down = mmpcam_power_down;
> - mcam->ctlr_reset = mcam_ctlr_reset;
> mcam->calc_dphy = mmpcam_calc_dphy;
> mcam->dev = &pdev->dev;
> mcam->use_smbus = 0;

--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Attachment: signature.asc
Description: Digital signature