Re: [PATCH] ACPI / battery: Fix reporting "Not charging" when capacity is 100%

[Pavel Machek]

On Fri 2018-11-02 23:57:32, João Paulo Rechi Vita wrote:
> Commit 19fffc8450d4378580a8f019b195c4617083176f fixed reporting
> "Discharging" on some machines when AC was connected but the battery was
> not charging. But now on these machines the battery status is reported
> as "Not charging" even when the battery is fully charged.
> 
> This commit takes the battery capacity into consideration when checking
> if "Not charging" should be returned and "Full" is returned when the
> capacity is 100%.
> 
> Signed-off-by: João Paulo Rechi Vita <jprvita@xxxxxxxxxxxx>

We have people trying to modify this and it caused regressions in
MATE, IIRC.

Plus, I don't think "100% charge" is right test for "battery full". At
least on thinkpads, there's configuration option, and it is common
_not_ to charge batterry above 95% or so (to increase its lifetime).

								Pavel


>  	 * was plugged in and the device thus did not start a new charge cycle.
>  	 */
>  	if ((battery_ac_is_broken || power_supply_is_system_supplied()) &&
> -	    battery->rate_now == 0)
> +	    battery->rate_now == 0) {
> +		if (battery->capacity_now && battery->full_charge_capacity &&
> +		    battery->capacity_now / battery->full_charge_capacity == 1)
> +			return POWER_SUPPLY_STATUS_FULL;

Division? Really?

									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Attachment: signature.asc
Description: Digital signature