Re: [linux-sunxi] Re: [PATCH v3 17/25] dt-bindings: panel: Add Bananapi S070WV20-CT16 ICN6211 MIPI-DSI to RGB bridge

[Jagan Teki]

On Wed, Oct 31, 2018 at 2:46 PM Julian Calaby <julian.calaby@xxxxxxxxx> wrote:
>
> Hi Jagan,
>
> On Wed, Oct 31, 2018 at 7:58 PM Chen-Yu Tsai <wens@xxxxxxxx> wrote:
> >
> > On Wed, Oct 31, 2018 at 4:53 PM Andrzej Hajda <a.hajda@xxxxxxxxxxx> wrote:
> > >
> > > On 26.10.2018 16:43, Jagan Teki wrote:
> > > > Bananapi S070WV20-CT16 ICN6211 is 800x480, 4-lane MIPI-DSI to RGB
> > > > bridge panel, which is available on same PCB with 24-bit RGB interface.
> > > >
> > > > So, this patch adds DSI specific binding details on existing
> > > > dt-bindings file.
> > > >
> > > > Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> > > > ---
> > > > Changes for v3:
> > > > - Use existing binding doc and update dsi details
> > > > Changes for v2:
> > > > - none
> > > >
> > > >  .../display/panel/bananapi,s070wv20-ct16.txt  | 31 +++++++++++++++++--
> > > >  1 file changed, 29 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
> > > > index 35bc0c839f49..b7855dc7c66f 100644
> > > > --- a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
> > > > +++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
> > > > @@ -1,12 +1,39 @@
> > > >  Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
> > > >
> > > > +S070WV20-CT16 is 7" 800x480 panel connected through a 24-bit RGB interface.
> > > > +
> > > > +Depending on the variant, the PCB attached to the panel module either
> > > > +supports DSI, or DSI + 24-bit RGB. DSI is converted to 24-bit RGB via
> > > > +an onboard ICN6211 MIPI DSI - RGB bridge chip, then fed to the panel
> > > > +itself
> > >
> > > As I understand this is display board, which contains 'pure' RGB panel
> > > S070WV20-CT16 and optionally ICN6211 DSI->RGB bridge.
> > > These are separate devices, just connected by vendor to simplify its
> > > assembly. Why don't you create then bridge driver for ICN6211 and RGB
> > > panel driver for S070WV20-CT16 - it looks more generic.
> > > Then you can describe both in dts and voila.
> > > Creating drivers for every combo of devices (panel + bridge), just
> > > because some vendor sells them together seems incorrect - we have
> > > devicetree for it.
> >
> > Rob suggested this, and also the opposite: using the same
> > "bananapi,s070wv20-ct16"
> > compatible string for both types of connections, and have the driver deal with
> > detecting the bus type.
> >
> > The thing about the bridge chip is that there's no available datasheet that
> > describes all the parts of the init sequence, in fact none at all. I managed
> > to work out some bits, but the others remain a mystery and must be hard-coded
> > to match the panel. That would work against having a generic bridge driver.
>
> To me it seems logical that we'd model it as another step in the graph
> between the DSI component and the panel. It's conceivable that some
> other manufacturer will probably buy these for their panels and having
> a somewhat generic driver seems vaguely future proof to me.
>
> As I see it, the weird init process belongs to the bridge chip and the
> timings belong to the panel and we shouldn't "confuse" them by giving
> them the same compatible.

But the problem here is due to lack of information about the panel,
the init process command opcode data values seem to based on the panel
timings values. This look weird and ie reason for going into separate
panel driver with different compatible.