Re: [PATCH] arm64: dts: rockchip: rk3399: Add xin32k clk

[dbasehore .]

On Thu, Nov 15, 2018 at 9:03 PM Doug Anderson <dianders@xxxxxxxxxxxx> wrote:
>
> Hi,
>
> On Thu, Nov 15, 2018 at 4:42 PM Derek Basehore <dbasehore@xxxxxxxxxxxx> wrote:
> >
> > This adds the xin32k clock to the RK3399 CPU. Even though it's not
> > directly used, muxes will end up traversing the entire clk tree on
> > calls to determine_rate if it doesn't exist.
> >
> > Signed-off-by: Derek Basehore <dbasehore@xxxxxxxxxxxx>
> > ---
> >  arch/arm64/boot/dts/rockchip/rk3399.dtsi | 7 +++++++
> >  1 file changed, 7 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> > index 99e7f65c1779..6a32293982d0 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> > +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> > @@ -191,6 +191,13 @@
> >                 #clock-cells = <0>;
> >         };
> >
> > +       xin32k: xin32k {
>
> nit: xin32k is the name of the clock that rk3399 consumes.  It seems a
> little weird to name this node with that name.  Can you call this:
>
> ap_rtc_clk: ap-rtc-clk
>
> ...after the gru schematic?  You wouldn't change the
> clock-output-names, just the node name / label.
>
>
> > +               compatible = "fixed-clock";
> > +               clock-frequency = <32000>;
>
> I checked the datasheet for the 32K clock and it shows that this is a
> 32768 Hz clock, not a 32000 Hz one.  I also checked the rk808 clock
> driver (which is supposed to be compatible with rk3399) and it
> produces a 32768 clock.

Ok, sending out an updated patch that addresses these concerns.