Re: [PATCH v3 3/3] b43: Use cordic algorithm from kernel library
From: Larry Finger
Date: Sun Nov 18 2018 - 14:36:03 EST
This is a multi-part message in MIME format.
On 11/18/18 2:23 AM, Priit Laes wrote:
On Sat, Nov 17, 2018 at 09:31:35PM -0600, Larry Finger wrote:
On 11/14/18 12:27 PM, Priit Laes wrote:
Kernel library has a common cordic algorithm which is identical
to internally implementatd one, so use it and drop the duplicate
implementation.
Signed-off-by: Priit Laes <plaes@xxxxxxxxx>
---
drivers/net/wireless/broadcom/b43/Kconfig | 1 +-
drivers/net/wireless/broadcom/b43/phy_common.c | 47 +-------------------
drivers/net/wireless/broadcom/b43/phy_common.h | 9 +----
drivers/net/wireless/broadcom/b43/phy_lp.c | 13 ++---
drivers/net/wireless/broadcom/b43/phy_n.c | 13 ++---
5 files changed, 15 insertions(+), 68 deletions(-)
diff --git a/drivers/net/wireless/broadcom/b43/Kconfig b/drivers/net/wireless/broadcom/b43/Kconfig
index fba8560..3e41457 100644
--- a/drivers/net/wireless/broadcom/b43/Kconfig
+++ b/drivers/net/wireless/broadcom/b43/Kconfig
@@ -4,6 +4,7 @@ config B43
select BCMA if B43_BCMA
select SSB if B43_SSB
select FW_LOADER
+ select CORDIC
---help---
b43 is a driver for the Broadcom 43xx series wireless devices.
diff --git a/drivers/net/wireless/broadcom/b43/phy_common.c b/drivers/net/wireless/broadcom/b43/phy_common.c
index 85f2ca9..98c4fa5 100644
--- a/drivers/net/wireless/broadcom/b43/phy_common.c
+++ b/drivers/net/wireless/broadcom/b43/phy_common.c
@@ -604,50 +604,3 @@ void b43_phy_force_clock(struct b43_wldev *dev, bool force)
#endif
}
}
-
-/* http://bcm-v4.sipsolutions.net/802.11/PHY/Cordic */
-struct b43_c32 b43_cordic(int theta)
-{
- static const u32 arctg[] = {
- 2949120, 1740967, 919879, 466945, 234379, 117304,
- 58666, 29335, 14668, 7334, 3667, 1833,
- 917, 458, 229, 115, 57, 29,
- };
- u8 i;
- s32 tmp;
- s8 signx = 1;
- u32 angle = 0;
- struct b43_c32 ret = { .i = 39797, .q = 0, };
-
- while (theta > (180 << 16))
- theta -= (360 << 16);
- while (theta < -(180 << 16))
- theta += (360 << 16);
-
- if (theta > (90 << 16)) {
- theta -= (180 << 16);
- signx = -1;
- } else if (theta < -(90 << 16)) {
- theta += (180 << 16);
- signx = -1;
- }
-
- for (i = 0; i <= 17; i++) {
- if (theta > angle) {
- tmp = ret.i - (ret.q >> i);
- ret.q += ret.i >> i;
- ret.i = tmp;
- angle += arctg[i];
- } else {
- tmp = ret.i + (ret.q >> i);
- ret.q -= ret.i >> i;
- ret.i = tmp;
- angle -= arctg[i];
- }
- }
-
- ret.i *= signx;
- ret.q *= signx;
-
- return ret;
-}
diff --git a/drivers/net/wireless/broadcom/b43/phy_common.h b/drivers/net/wireless/broadcom/b43/phy_common.h
index 57a1ad8..4213cac 100644
--- a/drivers/net/wireless/broadcom/b43/phy_common.h
+++ b/drivers/net/wireless/broadcom/b43/phy_common.h
@@ -7,13 +7,6 @@
struct b43_wldev;
-/* Complex number using 2 32-bit signed integers */
-struct b43_c32 { s32 i, q; };
-
-#define CORDIC_CONVERT(value) (((value) >= 0) ? \
- ((((value) >> 15) + 1) >> 1) : \
- -((((-(value)) >> 15) + 1) >> 1))
-
/* PHY register routing bits */
#define B43_PHYROUTE 0x0C00 /* PHY register routing bits mask */
#define B43_PHYROUTE_BASE 0x0000 /* Base registers */
@@ -450,6 +443,4 @@ bool b43_is_40mhz(struct b43_wldev *dev);
void b43_phy_force_clock(struct b43_wldev *dev, bool force);
-struct b43_c32 b43_cordic(int theta);
-
#endif /* LINUX_B43_PHY_COMMON_H_ */
diff --git a/drivers/net/wireless/broadcom/b43/phy_lp.c b/drivers/net/wireless/broadcom/b43/phy_lp.c
index 6922cbb..1718e3b 100644
--- a/drivers/net/wireless/broadcom/b43/phy_lp.c
+++ b/drivers/net/wireless/broadcom/b43/phy_lp.c
@@ -23,6 +23,7 @@
*/
+#include <linux/cordic.h>
#include <linux/slab.h>
#include "b43.h"
@@ -1780,9 +1781,9 @@ static void lpphy_start_tx_tone(struct b43_wldev *dev, s32 freq, u16 max)
{
struct b43_phy_lp *lpphy = dev->phy.lp;
u16 buf[64];
- int i, samples = 0, angle = 0;
+ int i, samples = 0, theta = 0;
int rotation = (((36 * freq) / 20) << 16) / 100;
- struct b43_c32 sample;
+ struct cordic_iq sample;
lpphy->tx_tone_freq = freq;
@@ -1798,10 +1799,10 @@ static void lpphy_start_tx_tone(struct b43_wldev *dev, s32 freq, u16 max)
}
for (i = 0; i < samples; i++) {
- sample = b43_cordic(angle);
- angle += rotation;
- buf[i] = CORDIC_CONVERT((sample.i * max) & 0xFF) << 8;
- buf[i] |= CORDIC_CONVERT((sample.q * max) & 0xFF);
+ sample = cordic_calc_iq(theta);
+ theta += rotation;
+ buf[i] = CORDIC_FLOAT((sample.i * max) & 0xFF) << 8;
+ buf[i] |= CORDIC_FLOAT((sample.q * max) & 0xFF);
}
b43_lptab_write_bulk(dev, B43_LPTAB16(5, 0), samples, buf);
diff --git a/drivers/net/wireless/broadcom/b43/phy_n.c b/drivers/net/wireless/broadcom/b43/phy_n.c
index 44ab080..1f9378a 100644
--- a/drivers/net/wireless/broadcom/b43/phy_n.c
+++ b/drivers/net/wireless/broadcom/b43/phy_n.c
@@ -23,6 +23,7 @@
*/
+#include <linux/cordic.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/types.h>
@@ -1513,7 +1514,7 @@ static void b43_radio_init2055(struct b43_wldev *dev)
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/LoadSampleTable */
static int b43_nphy_load_samples(struct b43_wldev *dev,
- struct b43_c32 *samples, u16 len) {
+ struct cordic_iq *samples, u16 len) {
struct b43_phy_n *nphy = dev->phy.n;
u16 i;
u32 *data;
@@ -1544,7 +1545,7 @@ static u16 b43_nphy_gen_load_samples(struct b43_wldev *dev, u32 freq, u16 max,
{
int i;
u16 bw, len, rot, angle;
- struct b43_c32 *samples;
+ struct cordic_iq *samples;
bw = b43_is_40mhz(dev) ? 40 : 20;
len = bw << 3;
@@ -1561,7 +1562,7 @@ static u16 b43_nphy_gen_load_samples(struct b43_wldev *dev, u32 freq, u16 max,
len = bw << 1;
}
- samples = kcalloc(len, sizeof(struct b43_c32), GFP_KERNEL);
+ samples = kcalloc(len, sizeof(struct cordic_iq), GFP_KERNEL);
if (!samples) {
b43err(dev->wl, "allocation for samples generation failed\n");
return 0;
@@ -1570,10 +1571,10 @@ static u16 b43_nphy_gen_load_samples(struct b43_wldev *dev, u32 freq, u16 max,
angle = 0;
for (i = 0; i < len; i++) {
- samples[i] = b43_cordic(angle);
+ samples[i] = cordic_calc_iq(angle);
angle += rot;
- samples[i].q = CORDIC_CONVERT(samples[i].q * max);
- samples[i].i = CORDIC_CONVERT(samples[i].i * max);
+ samples[i].q = CORDIC_FLOAT(samples[i].q * max);
+ samples[i].i = CORDIC_FLOAT(samples[i].i * max);
}
i = b43_nphy_load_samples(dev, samples, len);
There is a fundamental flaw in this patch. Routine b43_cordic() takes an
angle in degrees scaled by 2^16, whereas cordic_calc_iq() takes an angle in
degrees. For a given input, the two routines must get different answers. At
a minimum, the calculation of rot would need to remove the left shift of 16.
Thanks for the hint. I modified my "test harness" a bit to plot out values
from -360 .. 360 and transformed the theta for b43_cordic argument using CORDIC_FIXED macro:
b43_cordic(CORDIC_FIXED(theta));
cordic_calc_iq(theta);
Then I plotted the results and well.. they are not that pretty. While the results give
identical answers between certain ranges of degrees, the cordic algorithm for b43 seems
to be broken for certain ranges: (-270..-180 ; -90 .. 0; 90.. 180 and 270..360).
You can find my test harnesses here:
https://gist.github.com/plaes/284993a4fc65e0926d0628a11f0cf874
I found a problem with the b43 implementation. The local variables for that
routine includes
u32 angle = 0;
If one looks further down in the algorithm, if the reduced value of "theta" is
less than 0, then "angle" should be negative. That causes the calculation to
blow up. This explains why some ranges of angles got the same result for both
routines. When that declaration is changed to "int angle = 0", the two routines
give the same answer for all inputs.
My test setup has a hardware failure, thus I cannot test your patch, but I now
believe it to be correct. Thus your first and third patches may be annotated with
ACKed-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
One thing that should be done is to fix the error in the b43 code for stable as
it was introduced in 2.6.34. I propose adding the attached patched to your
series placed between your current 2nd and 3rd patches so that the old kernels
get fixed. Of course, your 3rd patch will need to be revised. If all 4 of the
patches get submitted together there will be no problems with the timing. My
change will exist for seconds in the mainline kernel, but it will get propagated
back through stable.
Thanks,
Larry