Re: DVB-S PCI card regression on 4.19 / 4.20

From: Takashi Iwai
Date: Tue Nov 20 2018 - 04:54:28 EST

Next message: Vivek Gautam: "[PATCH 1/1] drm: msm: Replace dma_map_sg with dma_sync_sg*"
Previous message: Uwe Kleine-König: "Re: [RCF PATCH,v2,2/2] pwm: imx: Configure output to GPIO in disabled state"
In reply to: stakanov: "Re: DVB-S PCI card regression on 4.19 / 4.20"
Next in thread: Mauro Carvalho Chehab: "Re: DVB-S PCI card regression on 4.19 / 4.20"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Tue, 20 Nov 2018 10:51:59 +0100,
stakanov wrote:
>
> In data martedÃ 20 novembre 2018 10:18:10 CET, Mauro Carvalho Chehab ha
> scritto:
> > Em Tue, 20 Nov 2018 09:07:57 +0100
> >
> > stakanov <stakanov@xxxxxxxxxx> escreveu:
> > > In data martedÃ 20 novembre 2018 00:58:41 CET, Mauro Carvalho Chehab ha
> > >
> > > scritto:
> > > > Em Tue, 20 Nov 2018 00:19:54 +0100
> > > >
> > > > stakanov <stakanov@xxxxxxxxxx> escreveu:
> > > > > In data martedÃ 20 novembre 2018 00:08:45 CET, Mauro Carvalho Chehab
> > > > > ha
> > > > >
> > > > > scritto:
> > > > > > uname -a
> > > > > >
> > > > > > > Linux silversurfer 4.20.0-rc3-1.g7e16618-default #1 SMP PREEMPT
> > > > > > > Mon
> > > > > > > Nov 19
> > > > > > > 18:54:15 UTC 2018 (7e16618) x86_64 x86_64 x86_64 GNU/Linux
> > > > >
> > > > > uname -a
> > > > >
> > > > > > Linux silversurfer 4.20.0-rc3-1.g7e16618-default #1 SMP PREEMPT Mon
> > > > > > Nov
> > > > > > 19
> > > > > > 18:54:15 UTC 2018 (7e16618) x86_64 x86_64 x86_64 GNU/Linux
> > > > >
> > > > > from
> > > > > https://download.opensuse.org/repositories/home:/tiwai:/bsc1116374/
> > > > > standard/x86_64/
> > > > >
> > > > > So I booted this one, should be the right one.
> > > > > sudo dmesg | grep -i b2c2 should give these additional messages?
> > > > >
> > > > > If Takashi is still around, he could confirm.
> > > >
> > > > Well, if the patch got applied, you should now be getting messages
> > > > similar
> > > >
> > > > (but not identical) to:
> > > > dvb_frontend_get_frequency_limits: frequencies: tuner:
> > > > 9150000...2150000,
> > > >
> > > > frontend: 9150000...2150000 dvb_pll_attach: delsys: 5, frequency range:
> > > > 9150000..2150000
> > > >
> > > > > _________________________________________________________________
> > > > > ________________________________________________________
> > > > > Ihre E-Mail-PostfÃcher sicher & zentral an einem Ort. Jetzt wechseln
> > > > > und
> > > > > alte E-Mail-Adresse mitnehmen! https://www.eclipso.de
> > > >
> > > > Thanks,
> > > > Mauro
> > >
> > > My bad.
> > > With just dmesg:
> > >
> > > [ 89.399887] dvb_frontend_get_frequency_limits: frequencies: tuner:
> > > 950000...2150000, frontend: 950000000...2150000000
> > > [ 95.020149] dvb_frontend_get_frequency_limits: frequencies: tuner:
> > > 950000...2150000, frontend: 950000000...2150000000
> > > [ 95.152049] dvb_frontend_get_frequency_limits: frequencies: tuner:
> > > 950000...2150000, frontend: 950000000...2150000000
> > > [ 95.152058] b2c2_flexcop_pci 0000:06:06.0: DVB: adapter 0 frontend 0
> > > frequency 1880000 out of range (950000..2150)
> > > [ 98.356539] dvb_frontend_get_frequency_limits: frequencies: tuner:
> > > 950000...2150000, frontend: 950000000...2150000000
> > > [ 98.480372] dvb_frontend_get_frequency_limits: frequencies: tuner:
> > > 950000...2150000, frontend: 950000000...2150000000
> > > [ 98.480381] b2c2_flexcop_pci 0000:06:06.0: DVB: adapter 0 frontend 0
> > > frequency 1587500 out of range (950000..2150)
> > > [ 100.016823] dvb_frontend_get_frequency_limits: frequencies: tuner:
> > > 950000...2150000, frontend: 950000000...2150000000
> > > [ 100.140619] dvb_frontend_get_frequency_limits: frequencies: tuner:
> > > 950000...2150000, frontend: 950000000...2150000000
> > > [ 100.140629] b2c2_flexcop_pci 0000:06:06.0: DVB: adapter 0 frontend 0
> > > frequency 1353500 out of range (950000..2150)
> > > [ 105.361166] dvb_frontend_get_frequency_limits: frequencies: tuner:
> > > 950000...2150000, frontend: 950000000...2150000000
> > > [ 105.492972] dvb_frontend_get_frequency_limits: frequencies: tuner:
> > > 950000...2150000, frontend: 950000000...2150000000
> > > [ 105.492977] b2c2_flexcop_pci 0000:06:06.0: DVB: adapter 0 frontend 0
> > > frequency 1944750 out of range (950000..2150)
> > >
> > >
> > > Which is, I guess the info you need?
> >
> > Yes, partially. Clearly, the problem is coming from the tuner, with is
> > not reporting the frequency in Hz, but I was hoping to see another
> > message from the tuner driver, in order for me to be sure about what's
> > happening there.
> >
> > Didn't you get any message that starts with "dvb_pll_attach"?
> >
> > The thing with Flexcop is that there are several variations, each one
> > with a different tuner driver.
> >
> > Anyway, I guess I found the trouble: it is trying to use the DVB
> > cache to check the delivery system too early (at attach time).
> >
> > I suspect that the enclosed patch will fix the issue. Could you please
> > test it?
> >
> > Thanks!
> > Mauro
> >
> >
> > diff --git a/drivers/media/dvb-frontends/dvb-pll.c
> > b/drivers/media/dvb-frontends/dvb-pll.c index 6d4b2eec67b4..390ecc915096
> > 100644
> > --- a/drivers/media/dvb-frontends/dvb-pll.c
> > +++ b/drivers/media/dvb-frontends/dvb-pll.c
> > @@ -80,8 +80,8 @@ struct dvb_pll_desc {
> >
> > static const struct dvb_pll_desc dvb_pll_thomson_dtt7579 = {
> > .name = "Thomson dtt7579",
> > - .min = 177000000,
> > - .max = 858000000,
> > + .min = 177 * MHz,
> > + .max = 858 * MHz,
> > .iffreq= 36166667,
> > .sleepdata = (u8[]){ 2, 0xb4, 0x03 },
> > .count = 4,
> > @@ -102,8 +102,8 @@ static void thomson_dtt759x_bw(struct dvb_frontend *fe,
> > u8 *buf)
> >
> > static const struct dvb_pll_desc dvb_pll_thomson_dtt759x = {
> > .name = "Thomson dtt759x",
> > - .min = 177000000,
> > - .max = 896000000,
> > + .min = 177 * MHz,
> > + .max = 896 * MHz,
> > .set = thomson_dtt759x_bw,
> > .iffreq= 36166667,
> > .sleepdata = (u8[]){ 2, 0x84, 0x03 },
> > @@ -126,8 +126,8 @@ static void thomson_dtt7520x_bw(struct dvb_frontend *fe,
> > u8 *buf)
> >
> > static const struct dvb_pll_desc dvb_pll_thomson_dtt7520x = {
> > .name = "Thomson dtt7520x",
> > - .min = 185000000,
> > - .max = 900000000,
> > + .min = 185 * MHz,
> > + .max = 900 * MHz,
> > .set = thomson_dtt7520x_bw,
> > .iffreq = 36166667,
> > .count = 7,
> > @@ -144,8 +144,8 @@ static const struct dvb_pll_desc
> > dvb_pll_thomson_dtt7520x = {
> >
> > static const struct dvb_pll_desc dvb_pll_lg_z201 = {
> > .name = "LG z201",
> > - .min = 174000000,
> > - .max = 862000000,
> > + .min = 174 * MHz,
> > + .max = 862 * MHz,
> > .iffreq= 36166667,
> > .sleepdata = (u8[]){ 2, 0xbc, 0x03 },
> > .count = 5,
> > @@ -160,8 +160,8 @@ static const struct dvb_pll_desc dvb_pll_lg_z201 = {
> >
> > static const struct dvb_pll_desc dvb_pll_unknown_1 = {
> > .name = "unknown 1", /* used by dntv live dvb-t */
> > - .min = 174000000,
> > - .max = 862000000,
> > + .min = 174 * MHz,
> > + .max = 862 * MHz,
> > .iffreq= 36166667,
> > .count = 9,
> > .entries = {
> > @@ -182,8 +182,8 @@ static const struct dvb_pll_desc dvb_pll_unknown_1 = {
> > */
> > static const struct dvb_pll_desc dvb_pll_tua6010xs = {
> > .name = "Infineon TUA6010XS",
> > - .min = 44250000,
> > - .max = 858000000,
> > + .min = 44250 * kHz,
> > + .max = 858 * MHz,
> > .iffreq= 36125000,
> > .count = 3,
> > .entries = {
> > @@ -196,8 +196,8 @@ static const struct dvb_pll_desc dvb_pll_tua6010xs = {
> > /* Panasonic env57h1xd5 (some Philips PLL ?) */
> > static const struct dvb_pll_desc dvb_pll_env57h1xd5 = {
> > .name = "Panasonic ENV57H1XD5",
> > - .min = 44250000,
> > - .max = 858000000,
> > + .min = 44250 * kHz,
> > + .max = 858 * MHz,
> > .iffreq= 36125000,
> > .count = 4,
> > .entries = {
> > @@ -220,8 +220,8 @@ static void tda665x_bw(struct dvb_frontend *fe, u8 *buf)
> >
> > static const struct dvb_pll_desc dvb_pll_tda665x = {
> > .name = "Philips TDA6650/TDA6651",
> > - .min = 44250000,
> > - .max = 858000000,
> > + .min = 44250 * kHz,
> > + .max = 858 * MHz,
> > .set = tda665x_bw,
> > .iffreq= 36166667,
> > .initdata = (u8[]){ 4, 0x0b, 0xf5, 0x85, 0xab },
> > @@ -254,8 +254,8 @@ static void tua6034_bw(struct dvb_frontend *fe, u8 *buf)
> >
> > static const struct dvb_pll_desc dvb_pll_tua6034 = {
> > .name = "Infineon TUA6034",
> > - .min = 44250000,
> > - .max = 858000000,
> > + .min = 44250 * kHz,
> > + .max = 858 * MHz,
> > .iffreq= 36166667,
> > .count = 3,
> > .set = tua6034_bw,
> > @@ -278,8 +278,8 @@ static void tded4_bw(struct dvb_frontend *fe, u8 *buf)
> >
> > static const struct dvb_pll_desc dvb_pll_tded4 = {
> > .name = "ALPS TDED4",
> > - .min = 47000000,
> > - .max = 863000000,
> > + .min = 47 * MHz,
> > + .max = 863 * MHz,
> > .iffreq= 36166667,
> > .set = tded4_bw,
> > .count = 4,
> > @@ -296,8 +296,8 @@ static const struct dvb_pll_desc dvb_pll_tded4 = {
> > */
> > static const struct dvb_pll_desc dvb_pll_tdhu2 = {
> > .name = "ALPS TDHU2",
> > - .min = 54000000,
> > - .max = 864000000,
> > + .min = 54 * MHz,
> > + .max = 864 * MHz,
> > .iffreq= 44000000,
> > .count = 4,
> > .entries = {
> > @@ -313,8 +313,8 @@ static const struct dvb_pll_desc dvb_pll_tdhu2 = {
> > */
> > static const struct dvb_pll_desc dvb_pll_samsung_tbmv = {
> > .name = "Samsung TBMV30111IN / TBMV30712IN1",
> > - .min = 54000000,
> > - .max = 860000000,
> > + .min = 54 * MHz,
> > + .max = 860 * MHz,
> > .iffreq= 44000000,
> > .count = 6,
> > .entries = {
> > @@ -332,8 +332,8 @@ static const struct dvb_pll_desc dvb_pll_samsung_tbmv =
> > { */
> > static const struct dvb_pll_desc dvb_pll_philips_sd1878_tda8261 = {
> > .name = "Philips SD1878",
> > - .min = 950000,
> > - .max = 2150000,
> > + .min = 950 * MHz,
> > + .max = 2150 * MHz,
> > .iffreq= 249, /* zero-IF, offset 249 is to round up */
> > .count = 4,
> > .entries = {
> > @@ -398,8 +398,8 @@ static void opera1_bw(struct dvb_frontend *fe, u8 *buf)
> >
> > static const struct dvb_pll_desc dvb_pll_opera1 = {
> > .name = "Opera Tuner",
> > - .min = 900000,
> > - .max = 2250000,
> > + .min = 900 * MHz,
> > + .max = 2250 * MHz,
> > .initdata = (u8[]){ 4, 0x08, 0xe5, 0xe1, 0x00 },
> > .initdata2 = (u8[]){ 4, 0x08, 0xe5, 0xe5, 0x00 },
> > .iffreq= 0,
> > @@ -445,8 +445,8 @@ static void samsung_dtos403ih102a_set(struct
> > dvb_frontend *fe, u8 *buf) /* unknown pll used in Samsung DTOS403IH102A
> > DVB-C tuner */
> > static const struct dvb_pll_desc dvb_pll_samsung_dtos403ih102a = {
> > .name = "Samsung DTOS403IH102A",
> > - .min = 44250000,
> > - .max = 858000000,
> > + .min = 44250 * kHz,
> > + .max = 858 * MHz,
> > .iffreq = 36125000,
> > .count = 8,
> > .set = samsung_dtos403ih102a_set,
> > @@ -465,8 +465,8 @@ static const struct dvb_pll_desc
> > dvb_pll_samsung_dtos403ih102a = { /* Samsung TDTC9251DH0 DVB-T NIM, as used
> > on AirStar 2 */
> > static const struct dvb_pll_desc dvb_pll_samsung_tdtc9251dh0 = {
> > .name = "Samsung TDTC9251DH0",
> > - .min = 48000000,
> > - .max = 863000000,
> > + .min = 48 * MHz,
> > + .max = 863 * MHz,
> > .iffreq = 36166667,
> > .count = 3,
> > .entries = {
> > @@ -479,8 +479,8 @@ static const struct dvb_pll_desc
> > dvb_pll_samsung_tdtc9251dh0 = { /* Samsung TBDU18132 DVB-S NIM with TSA5059
> > PLL, used in SkyStar2 DVB-S 2.3 */ static const struct dvb_pll_desc
> > dvb_pll_samsung_tbdu18132 = {
> > .name = "Samsung TBDU18132",
> > - .min = 950000,
> > - .max = 2150000, /* guesses */
> > + .min = 950 * MHz,
> > + .max = 2150 * MHz, /* guesses */
> > .iffreq = 0,
> > .count = 2,
> > .entries = {
> > @@ -500,8 +500,8 @@ static const struct dvb_pll_desc
> > dvb_pll_samsung_tbdu18132 = { /* Samsung TBMU24112 DVB-S NIM with SL1935
> > zero-IF tuner */
> > static const struct dvb_pll_desc dvb_pll_samsung_tbmu24112 = {
> > .name = "Samsung TBMU24112",
> > - .min = 950000,
> > - .max = 2150000, /* guesses */
> > + .min = 950 * MHz,
> > + .max = 2150 * MHz, /* guesses */
> > .iffreq = 0,
> > .count = 2,
> > .entries = {
> > @@ -521,8 +521,8 @@ static const struct dvb_pll_desc
> > dvb_pll_samsung_tbmu24112 = { * 822 - 862 1 * 0 0 1 0 0 0
> > 0x88 */
> > static const struct dvb_pll_desc dvb_pll_alps_tdee4 = {
> > .name = "ALPS TDEE4",
> > - .min = 47000000,
> > - .max = 862000000,
> > + .min = 47 * MHz,
> > + .max = 862 * MHz,
> > .iffreq = 36125000,
> > .count = 4,
> > .entries = {
> > @@ -537,8 +537,8 @@ static const struct dvb_pll_desc dvb_pll_alps_tdee4 = {
> > /* CP cur. 50uA, AGC takeover: 103dBuV, PORT3 on */
> > static const struct dvb_pll_desc dvb_pll_tua6034_friio = {
> > .name = "Infineon TUA6034 ISDB-T (Friio)",
> > - .min = 90000000,
> > - .max = 770000000,
> > + .min = 90 * MHz,
> > + .max = 770 * MHz,
> > .iffreq = 57000000,
> > .initdata = (u8[]){ 4, 0x9a, 0x50, 0xb2, 0x08 },
> > .sleepdata = (u8[]){ 4, 0x9a, 0x70, 0xb3, 0x0b },
> > @@ -553,8 +553,8 @@ static const struct dvb_pll_desc dvb_pll_tua6034_friio =
> > { /* Philips TDA6651 ISDB-T, used in Earthsoft PT1 */
> > static const struct dvb_pll_desc dvb_pll_tda665x_earth_pt1 = {
> > .name = "Philips TDA6651 ISDB-T (EarthSoft PT1)",
> > - .min = 90000000,
> > - .max = 770000000,
> > + .min = 90 * MHz,
> > + .max = 770 * MHz,
> > .iffreq = 57000000,
> > .initdata = (u8[]){ 5, 0x0e, 0x7f, 0xc1, 0x80, 0x80 },
> > .count = 10,
> > @@ -845,18 +845,11 @@ struct dvb_frontend *dvb_pll_attach(struct
> > dvb_frontend *fe, int pll_addr,
> >
> > strncpy(fe->ops.tuner_ops.info.name, desc->name,
> > sizeof(fe->ops.tuner_ops.info.name));
> > - switch (c->delivery_system) {
> > - case SYS_DVBS:
> > - case SYS_DVBS2:
> > - case SYS_TURBO:
> > - case SYS_ISDBS:
> > - fe->ops.tuner_ops.info.frequency_min_hz = desc->min * kHz;
> > - fe->ops.tuner_ops.info.frequency_max_hz = desc->max * kHz;
> > - break;
> > - default:
> > - fe->ops.tuner_ops.info.frequency_min_hz = desc->min;
> > - fe->ops.tuner_ops.info.frequency_max_hz = desc->max;
> > - }
> > +
> > + fe->ops.tuner_ops.info.frequency_min_hz = desc->min;
> > + fe->ops.tuner_ops.info.frequency_max_hz = desc->max;
> > +printk("%s: delsys: %d, frequency range: %u..%u\n",
> > + __func__, c->delivery_system,
> > fe->ops.tuner_ops.info.frequency_min_hz,
> > fe->ops.tuner_ops.info.frequency_max_hz);
> >
> > if (!desc->initdata)
> > fe->ops.tuner_ops.init = NULL;
>
>
> I will as soon as it will be ready.

FWIW, a test kernel with this patch is being built in the same OBS repo,
home:tiwai:bsc1116374. It'll be ready in an hour or so.

Takashi

Next message: Vivek Gautam: "[PATCH 1/1] drm: msm: Replace dma_map_sg with dma_sync_sg*"
Previous message: Uwe Kleine-König: "Re: [RCF PATCH,v2,2/2] pwm: imx: Configure output to GPIO in disabled state"
In reply to: stakanov: "Re: DVB-S PCI card regression on 4.19 / 4.20"
Next in thread: Mauro Carvalho Chehab: "Re: DVB-S PCI card regression on 4.19 / 4.20"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]