[PATCH 3/3] iio: adc: stm32-adc: switch off running adc when going to low power

From: Fabrice Gasnier
Date: Tue Nov 20 2018 - 05:13:47 EST


Switch off ADC when going to low power mode, in case it has been left
running in buffer mode. Then re-enable it when resuming.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
---
drivers/iio/adc/stm32-adc.c | 79 ++++++++++++++++++++++++++++++++++++---------
1 file changed, 63 insertions(+), 16 deletions(-)

diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index 32c9c61..2a9891c 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -1518,7 +1518,7 @@ static int stm32_adc_dma_start(struct iio_dev *indio_dev)
return 0;
}

-static int stm32_adc_buffer_postenable(struct iio_dev *indio_dev)
+static int __stm32_adc_buffer_postenable(struct iio_dev *indio_dev)
{
struct stm32_adc *adc = iio_priv(indio_dev);
struct device *dev = indio_dev->dev.parent;
@@ -1542,10 +1542,6 @@ static int stm32_adc_buffer_postenable(struct iio_dev *indio_dev)
goto err_clr_trig;
}

- ret = iio_triggered_buffer_postenable(indio_dev);
- if (ret < 0)
- goto err_stop_dma;
-
/* Reset adc buffer index */
adc->bufi = 0;

@@ -1556,9 +1552,6 @@ static int stm32_adc_buffer_postenable(struct iio_dev *indio_dev)

return 0;

-err_stop_dma:
- if (adc->dma_chan)
- dmaengine_terminate_all(adc->dma_chan);
err_clr_trig:
stm32_adc_set_trig(indio_dev, NULL);
err_pm_put:
@@ -1568,20 +1561,30 @@ static int stm32_adc_buffer_postenable(struct iio_dev *indio_dev)
return ret;
}

-static int stm32_adc_buffer_predisable(struct iio_dev *indio_dev)
+static int stm32_adc_buffer_postenable(struct iio_dev *indio_dev)
+{
+ int ret;
+
+ ret = iio_triggered_buffer_postenable(indio_dev);
+ if (ret < 0)
+ return ret;
+
+ ret = __stm32_adc_buffer_postenable(indio_dev);
+ if (ret < 0)
+ iio_triggered_buffer_predisable(indio_dev);
+
+ return ret;
+}
+
+static void __stm32_adc_buffer_predisable(struct iio_dev *indio_dev)
{
struct stm32_adc *adc = iio_priv(indio_dev);
struct device *dev = indio_dev->dev.parent;
- int ret;

adc->cfg->stop_conv(adc);
if (!adc->dma_chan)
stm32_adc_conv_irq_disable(adc);

- ret = iio_triggered_buffer_predisable(indio_dev);
- if (ret < 0)
- dev_err(&indio_dev->dev, "predisable failed\n");
-
if (adc->dma_chan)
dmaengine_terminate_all(adc->dma_chan);

@@ -1590,6 +1593,17 @@ static int stm32_adc_buffer_predisable(struct iio_dev *indio_dev)

pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
+}
+
+static int stm32_adc_buffer_predisable(struct iio_dev *indio_dev)
+{
+ int ret;
+
+ __stm32_adc_buffer_predisable(indio_dev);
+
+ ret = iio_triggered_buffer_predisable(indio_dev);
+ if (ret < 0)
+ dev_err(&indio_dev->dev, "predisable failed\n");

return ret;
}
@@ -2013,6 +2027,40 @@ static int stm32_adc_remove(struct platform_device *pdev)
return 0;
}

+#if defined(CONFIG_PM_SLEEP)
+static int stm32_adc_suspend(struct device *dev)
+{
+ struct stm32_adc *adc = dev_get_drvdata(dev);
+ struct iio_dev *indio_dev = iio_priv_to_dev(adc);
+
+ if (iio_buffer_enabled(indio_dev))
+ __stm32_adc_buffer_predisable(indio_dev);
+
+ return pm_runtime_force_suspend(dev);
+}
+
+static int stm32_adc_resume(struct device *dev)
+{
+ struct stm32_adc *adc = dev_get_drvdata(dev);
+ struct iio_dev *indio_dev = iio_priv_to_dev(adc);
+ int ret;
+
+ ret = pm_runtime_force_resume(dev);
+ if (ret < 0)
+ return ret;
+
+ if (!iio_buffer_enabled(indio_dev))
+ return 0;
+
+ ret = stm32_adc_update_scan_mode(indio_dev,
+ indio_dev->active_scan_mask);
+ if (ret < 0)
+ return ret;
+
+ return __stm32_adc_buffer_postenable(indio_dev);
+}
+#endif
+
#if defined(CONFIG_PM)
static int stm32_adc_runtime_suspend(struct device *dev)
{
@@ -2026,8 +2074,7 @@ static int stm32_adc_runtime_resume(struct device *dev)
#endif

static const struct dev_pm_ops stm32_adc_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
- pm_runtime_force_resume)
+ SET_SYSTEM_SLEEP_PM_OPS(stm32_adc_suspend, stm32_adc_resume)
SET_RUNTIME_PM_OPS(stm32_adc_runtime_suspend, stm32_adc_runtime_resume,
NULL)
};
--
1.9.1