[PATCH v5 3/8] clk: lochnagar: Add initial binding documentation

[Charles Keepax]

Lochnagar is an evaluation and development board for Cirrus
Logic Smart CODEC and Amp devices. It allows the connection of
most Cirrus Logic devices on mini-cards, as well as allowing
connection of various application processor systems to provide a
full evaluation platform. This driver supports the board
controller chip on the Lochnagar board.

Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
---
 .../devicetree/bindings/clock/cirrus,lochnagar.txt | 89 ++++++++++++++++++++++
 1 file changed, 89 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt

diff --git a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt
new file mode 100644
index 000000000000..c1b5478d5432
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt
@@ -0,0 +1,89 @@
+Cirrus Logic Lochnagar Audio Development Board
+
+Lochnagar is an evaluation and development board for Cirrus Logic
+Smart CODEC and Amp devices. It allows the connection of most Cirrus
+Logic devices on mini-cards, as well as allowing connection of
+various application processor systems to provide a full evaluation
+platform.  Audio system topology, clocking and power can all be
+controlled through the Lochnagar, allowing the device under test
+to be used in a variety of possible use cases.
+
+This binding document describes the binding for the clock portion of
+the driver.
+
+Also see these documents for generic binding information:
+  [1] Clock : ../clock/clock-bindings.txt
+
+And these for relevant defines:
+  [2] include/dt-bindings/clock/lochnagar.h
+
+This binding must be part of the Lochnagar MFD binding:
+  [3] ../mfd/cirrus,lochnagar.txt
+
+Required properties:
+
+  - compatible : One of the following strings:
+                 "cirrus,lochnagar1-clk"
+                 "cirrus,lochnagar2-clk"
+
+  - #clock-cells : Must be 1. The first cell indicates the clock
+    number, see [2] for available clocks and [1].
+
+Optional properties:
+
+  - clocks : Must contain an entry for each clock in clock-names.
+  - clock-names : May contain entries for each of the following
+    clocks:
+     - ln-cdc-clkout : Output clock from CODEC card.
+     - ln-dsp-clkout : Output clock from DSP card.
+     - ln-gf-mclk1,ln-gf-mclk2,ln-gf-mclk3,ln-gf-mclk4 : Optional
+       input audio clocks from host system.
+     - ln-psia1-mclk, ln-psia2-mclk : Optional input audio clocks from
+       external connector.
+     - ln-spdif-clkout : Optional input audio clock from SPDIF.
+     - ln-adat-clkout : Optional input audio clock from ADAT.
+     - ln-pmic-32k : On board fixed regulator.
+     - ln-clk-12m : On board fixed regulator.
+     - ln-clk-11m : On board fixed regulator.
+     - ln-clk-24m : On board fixed regulator.
+     - ln-clk-22m : On board fixed regulator.
+     - ln-usb-clk-24m : On board fixed regulator.
+     - ln-usb-clk-12m : On board fixed regulator.
+
+  - assigned-clocks : A list of Lochnagar clocks to be reparented, see
+    [2] for available clocks.
+  - assigned-clock-parents : Parents to be assigned to the clocks
+    listed in "assigned-clocks".
+
+Optional sub-nodes:
+
+  - fixed-clock nodes may be registered for the following on board clocks:
+     - ln-pmic-32k : 32768 kHz
+     - ln-clk-12m : 12288000 kHz
+     - ln-clk-11m : 11298600 kHz
+     - ln-clk-24m : 24576000 kHz
+     - ln-clk-22m : 22579200 kHz
+     - ln-usb-clk-24m : 24576000 kHz
+     - ln-usb-clk-12m : 12288000 kHz
+
+Example:
+
+lochnagar-clk {
+	compatible = "cirrus,lochnagar2-clk";
+
+	#clock-cells = <1>;
+
+	clocks = <&clk-audio>, <&clk_pmic>;
+	clock-names = "ln-gf-mclk2", "ln-pmic-32k";
+
+	assigned-clocks = <&lochnagar-clk LOCHNAGAR_CDC_MCLK1>,
+			  <&lochnagar-clk LOCHNAGAR_CDC_MCLK2>;
+	assigned-clock-parents = <&clk-audio>,
+				 <&clk-pmic>;
+
+	clk-pmic: clk-pmic {
+		compatible = "fixed-clock";
+		clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+};
-- 
2.11.0