[PATCH v4] debugobjects: scale the static pool size
From: Qian Cai
Date: Tue Nov 20 2018 - 21:12:35 EST
The current value of the early boot static pool size is not big enough
for systems with large number of CPUs with timer or/and workqueue
objects selected. As the results, systems have 60+ CPUs with both timer
and workqueue objects enabled could trigger "ODEBUG: Out of memory.
ODEBUG disabled". Hence, fixed it by computing it according to
CONFIG_NR_CPUS and CONFIG_DEBUG_OBJECTS_* options.
Signed-off-by: Qian Cai <cai@xxxxxx>
---
Changes since v3:
* style fixes
Changes since v2:
* Made the calculation easier to read suggested by longman@xxxxxxxxxxx
Changes since v1:
* Removed the CONFIG_NR_CPUS check since it is always defined.
* Introduced a minimal default pool size to start with. Otherwise, the pool
size would be too low for systems only with a small number of CPUs.
* Adjusted the scale factors according to data.
lib/debugobjects.c | 81 ++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 79 insertions(+), 2 deletions(-)
diff --git a/lib/debugobjects.c b/lib/debugobjects.c
index 70935ed91125..140571aa483c 100644
--- a/lib/debugobjects.c
+++ b/lib/debugobjects.c
@@ -23,9 +23,81 @@
#define ODEBUG_HASH_BITS 14
#define ODEBUG_HASH_SIZE (1 << ODEBUG_HASH_BITS)
-#define ODEBUG_POOL_SIZE 1024
+#define ODEBUG_DEFAULT_POOL 512
#define ODEBUG_POOL_MIN_LEVEL 256
+/*
+ * Some debug objects are allocated during the early boot. Enabling some options
+ * like timers or workqueue objects may increase the size required significantly
+ * with large number of CPUs. For example (as today, 20 Nov. 2018),
+ *
+ * No. CPUs x 2 (worker pool) objects:
+ *
+ * start_kernel
+ * workqueue_init_early
+ * init_worker_pool
+ * init_timer_key
+ * debug_object_init
+ *
+ * No. CPUs objects (CONFIG_HIGH_RES_TIMERS):
+ *
+ * sched_init
+ * hrtick_rq_init
+ * hrtimer_init
+ *
+ * CONFIG_DEBUG_OBJECTS_WORK:
+ * No. CPUs x 6 (workqueue) objects:
+ *
+ * workqueue_init_early
+ * alloc_workqueue
+ * __alloc_workqueue_key
+ * alloc_and_link_pwqs
+ * init_pwq
+ *
+ * Also, plus No. CPUs objects:
+ *
+ * perf_event_init
+ * __init_srcu_struct
+ * init_srcu_struct_fields
+ * init_srcu_struct_nodes
+ * __init_work
+ *
+ * Increase the number a bit more in case the implmentatins are changed in the
+ * future, as it is better to avoid OOM than spending a bit more kernel memory
+ * that will/can be freed.
+ *
+ * With all debug objects config options selected except the workqueue and the
+ * timers, kernel reports,
+ * 64-CPU: ODEBUG: 4 of 4 active objects replaced
+ * 256-CPU: ODEBUG: 4 of 4 active objects replaced
+ *
+ * all the options except the workqueue:
+ * 64-CPU: ODEBUG: 466 of 466 active objects replaced
+ * 256-CPU: ODEBUG: 1810 of 1810 active objects replaced
+ *
+ * all the options except the timers:
+ * 64-CPU: ODEBUG: 652 of 652 active objects replaced
+ * 256-CPU: ODEBUG: 2572 of 2572 active objects replaced
+ *
+ * all the options:
+ * 64-CPU: ODEBUG: 1114 of 1114 active objects replaced
+ * 256-CPU: ODEBUG: 4378 of 4378 active objects replaced
+ */
+#ifdef CONFIG_DEBUG_OBJECTS_WORK
+#define ODEBUG_WORK_PCPU_CNT 10
+#else
+#define ODEBUG_WORK_PCPU_CNT 0
+#endif /* CONFIG_DEBUG_OBJECTS_WORK */
+
+#ifdef CONFIG_DEBUG_OBJECTS_TIMERS
+#define ODEBUG_TIMERS_PCPU_CNT 10
+#else
+#define ODEBUG_TIMERS_PCPU_CNT 0
+#endif /* CONFIG_DEBUG_OBJECTS_TIMERS */
+
+#define ODEBUG_POOL_SIZE (ODEBUG_DEFAULT_POOL + CONFIG_NR_CPUS * \
+ (ODEBUG_TIMERS_PCPU_CNT + ODEBUG_WORK_PCPU_CNT))
+
#define ODEBUG_CHUNK_SHIFT PAGE_SHIFT
#define ODEBUG_CHUNK_SIZE (1 << ODEBUG_CHUNK_SHIFT)
#define ODEBUG_CHUNK_MASK (~(ODEBUG_CHUNK_SIZE - 1))
@@ -58,8 +130,13 @@ static int debug_objects_fixups __read_mostly;
static int debug_objects_warnings __read_mostly;
static int debug_objects_enabled __read_mostly
= CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT;
+/*
+ * This is only used after replaced static objects, so no need to scale it to
+ * use the early boot static pool size and it has already been scaled according
+ * to actual No. CPUs in the box within debug_objects_mem_init().
+ */
static int debug_objects_pool_size __read_mostly
- = ODEBUG_POOL_SIZE;
+ = ODEBUG_DEFAULT_POOL;
static int debug_objects_pool_min_level __read_mostly
= ODEBUG_POOL_MIN_LEVEL;
static struct debug_obj_descr *descr_test __read_mostly;
--
2.17.2 (Apple Git-113)