[PATCH] clk: qcom: Move to menuconfig and reduce lines

From: Stephen Boyd
Date: Wed Nov 21 2018 - 16:01:26 EST

We duplicate the 'depends on' in almost every Kconfig here, and it's
getting out of hand now that we have tens of options for various SoC
drivers here. Let's clean it up a little by making a menuconfig for a
submenu and adding an if wrapper around the driver section.

Cc: Taniya Das <tdas@xxxxxxxxxxxxxx>
Signed-off-by: Stephen Boyd <sboyd@xxxxxxxxxx>
---
drivers/clk/qcom/Kconfig | 39 +++++----------------------------------
1 file changed, 5 insertions(+), 34 deletions(-)

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index a611531df115..1977f40f4bec 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -9,16 +9,17 @@ config QCOM_GDSC
config QCOM_RPMCC
bool

-config COMMON_CLK_QCOM
+menuconfig COMMON_CLK_QCOM
tristate "Support for Qualcomm's clock controllers"
depends on OF
depends on ARCH_QCOM || COMPILE_TEST
select REGMAP_MMIO
select RESET_CONTROLLER

+if COMMON_CLK_QCOM
+
config QCOM_A53PLL
tristate "MSM8916 A53 PLL"
- depends on COMMON_CLK_QCOM
default ARCH_QCOM
help
Support for the A53 PLL on MSM8916 devices. It provides
@@ -28,7 +29,6 @@ config QCOM_A53PLL

config QCOM_CLK_APCS_MSM8916
tristate "MSM8916 APCS Clock Controller"
- depends on COMMON_CLK_QCOM
depends on QCOM_APCS_IPC || COMPILE_TEST
default ARCH_QCOM
help
@@ -39,7 +39,6 @@ config QCOM_CLK_APCS_MSM8916

config QCOM_CLK_RPM
tristate "RPM based Clock Controller"
- depends on COMMON_CLK_QCOM && MFD_QCOM_RPM
select QCOM_RPMCC
help
The RPM (Resource Power Manager) is a dedicated hardware engine for
@@ -52,7 +51,6 @@ config QCOM_CLK_RPM

config QCOM_CLK_SMD_RPM
tristate "RPM over SMD based Clock Controller"
- depends on COMMON_CLK_QCOM && QCOM_SMD_RPM
select QCOM_RPMCC
help
The RPM (Resource Power Manager) is a dedicated hardware engine for
@@ -65,7 +63,6 @@ config QCOM_CLK_SMD_RPM

config QCOM_CLK_RPMH
tristate "RPMh Clock Driver"
- depends on COMMON_CLK_QCOM && QCOM_RPMH
help
RPMh manages shared resources on some Qualcomm Technologies, Inc.
SoCs. It accepts requests from other hardware subsystems via RSC.
@@ -75,7 +72,6 @@ config QCOM_CLK_RPMH
config APQ_GCC_8084
tristate "APQ8084 Global Clock Controller"
select QCOM_GDSC
- depends on COMMON_CLK_QCOM
help
Support for the global clock controller on apq8084 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -85,7 +81,6 @@ config APQ_MMCC_8084
tristate "APQ8084 Multimedia Clock Controller"
select APQ_GCC_8084
select QCOM_GDSC
- depends on COMMON_CLK_QCOM
help
Support for the multimedia clock controller on apq8084 devices.
Say Y if you want to support multimedia devices such as display,
@@ -93,7 +88,6 @@ config APQ_MMCC_8084

config IPQ_GCC_4019
tristate "IPQ4019 Global Clock Controller"
- depends on COMMON_CLK_QCOM
help
Support for the global clock controller on ipq4019 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -101,7 +95,6 @@ config IPQ_GCC_4019

config IPQ_GCC_806X
tristate "IPQ806x Global Clock Controller"
- depends on COMMON_CLK_QCOM
help
Support for the global clock controller on ipq806x devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -110,7 +103,6 @@ config IPQ_GCC_806X
config IPQ_LCC_806X
tristate "IPQ806x LPASS Clock Controller"
select IPQ_GCC_806X
- depends on COMMON_CLK_QCOM
help
Support for the LPASS clock controller on ipq806x devices.
Say Y if you want to use audio devices such as i2s, pcm,
@@ -118,7 +110,6 @@ config IPQ_LCC_806X

config IPQ_GCC_8074
tristate "IPQ8074 Global Clock Controller"
- depends on COMMON_CLK_QCOM
help
Support for global clock controller on ipq8074 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -127,7 +118,6 @@ config IPQ_GCC_8074

config MSM_GCC_8660
tristate "MSM8660 Global Clock Controller"
- depends on COMMON_CLK_QCOM
help
Support for the global clock controller on msm8660 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -136,7 +126,6 @@ config MSM_GCC_8660
config MSM_GCC_8916
tristate "MSM8916 Global Clock Controller"
select QCOM_GDSC
- depends on COMMON_CLK_QCOM
help
Support for the global clock controller on msm8916 devices.
Say Y if you want to use devices such as UART, SPI i2c, USB,
@@ -144,7 +133,6 @@ config MSM_GCC_8916

config MSM_GCC_8960
tristate "APQ8064/MSM8960 Global Clock Controller"
- depends on COMMON_CLK_QCOM
help
Support for the global clock controller on apq8064/msm8960 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -153,7 +141,6 @@ config MSM_GCC_8960
config MSM_LCC_8960
tristate "APQ8064/MSM8960 LPASS Clock Controller"
select MSM_GCC_8960
- depends on COMMON_CLK_QCOM
help
Support for the LPASS clock controller on apq8064/msm8960 devices.
Say Y if you want to use audio devices such as i2s, pcm,
@@ -161,7 +148,6 @@ config MSM_LCC_8960

config MDM_GCC_9615
tristate "MDM9615 Global Clock Controller"
- depends on COMMON_CLK_QCOM
help
Support for the global clock controller on mdm9615 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -170,7 +156,6 @@ config MDM_GCC_9615
config MDM_LCC_9615
tristate "MDM9615 LPASS Clock Controller"
select MDM_GCC_9615
- depends on COMMON_CLK_QCOM
help
Support for the LPASS clock controller on mdm9615 devices.
Say Y if you want to use audio devices such as i2s, pcm,
@@ -179,7 +164,6 @@ config MDM_LCC_9615
config MSM_MMCC_8960
tristate "MSM8960 Multimedia Clock Controller"
select MSM_GCC_8960
- depends on COMMON_CLK_QCOM
help
Support for the multimedia clock controller on msm8960 devices.
Say Y if you want to support multimedia devices such as display,
@@ -188,7 +172,6 @@ config MSM_MMCC_8960
config MSM_GCC_8974
tristate "MSM8974 Global Clock Controller"
select QCOM_GDSC
- depends on COMMON_CLK_QCOM
help
Support for the global clock controller on msm8974 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -198,7 +181,6 @@ config MSM_MMCC_8974
tristate "MSM8974 Multimedia Clock Controller"
select MSM_GCC_8974
select QCOM_GDSC
- depends on COMMON_CLK_QCOM
help
Support for the multimedia clock controller on msm8974 devices.
Say Y if you want to support multimedia devices such as display,
@@ -206,7 +188,6 @@ config MSM_MMCC_8974

config MSM_GCC_8994
tristate "MSM8994 Global Clock Controller"
- depends on COMMON_CLK_QCOM
help
Support for the global clock controller on msm8994 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -215,7 +196,6 @@ config MSM_GCC_8994
config MSM_GCC_8996
tristate "MSM8996 Global Clock Controller"
select QCOM_GDSC
- depends on COMMON_CLK_QCOM
help
Support for the global clock controller on msm8996 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -225,7 +205,6 @@ config MSM_MMCC_8996
tristate "MSM8996 Multimedia Clock Controller"
select MSM_GCC_8996
select QCOM_GDSC
- depends on COMMON_CLK_QCOM
help
Support for the multimedia clock controller on msm8996 devices.
Say Y if you want to support multimedia devices such as display,
@@ -233,7 +212,6 @@ config MSM_MMCC_8996

config MSM_GCC_8998
tristate "MSM8998 Global Clock Controller"
- depends on COMMON_CLK_QCOM
help
Support for the global clock controller on msm8998 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -241,7 +219,6 @@ config MSM_GCC_8998

config QCS_GCC_404
tristate "QCS404 Global Clock Controller"
- depends on COMMON_CLK_QCOM
help
Support for the global clock controller on QCS404 devices.
Say Y if you want to use multimedia devices or peripheral
@@ -249,7 +226,6 @@ config QCS_GCC_404

config SDM_CAMCC_845
tristate "SDM845 Camera Clock Controller"
- depends on COMMON_CLK_QCOM
select SDM_GCC_845
help
Support for the camera clock controller on SDM845 devices.
@@ -258,7 +234,6 @@ config SDM_CAMCC_845
config SDM_GCC_660
tristate "SDM660 Global Clock Controller"
select QCOM_GDSC
- depends on COMMON_CLK_QCOM
help
Support for the global clock controller on SDM660 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -267,7 +242,6 @@ config SDM_GCC_660
config SDM_GCC_845
tristate "SDM845 Global Clock Controller"
select QCOM_GDSC
- depends on COMMON_CLK_QCOM
help
Support for the global clock controller on SDM845 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -275,7 +249,6 @@ config SDM_GCC_845

config SDM_VIDEOCC_845
tristate "SDM845 Video Clock Controller"
- depends on COMMON_CLK_QCOM
select SDM_GCC_845
select QCOM_GDSC
help
@@ -286,7 +259,6 @@ config SDM_VIDEOCC_845
config SDM_DISPCC_845
tristate "SDM845 Display Clock Controller"
select SDM_GCC_845
- depends on COMMON_CLK_QCOM
help
Support for the display clock controller on Qualcomm Technologies, Inc
SDM845 devices.
@@ -304,7 +276,6 @@ config SPMI_PMIC_CLKDIV

config QCOM_HFPLL
tristate "High-Frequency PLL (HFPLL) Clock Controller"
- depends on COMMON_CLK_QCOM
help
Support for the high-frequency PLLs present on Qualcomm devices.
Say Y if you want to support CPU frequency scaling on devices
@@ -312,7 +283,6 @@ config QCOM_HFPLL

config KPSS_XCC
tristate "KPSS Clock Controller"
- depends on COMMON_CLK_QCOM
help
Support for the Krait ACC and GCC clock controllers. Say Y
if you want to support CPU frequency scaling on devices such
@@ -320,8 +290,9 @@ config KPSS_XCC

config KRAITCC
tristate "Krait Clock Controller"
- depends on COMMON_CLK_QCOM && ARM
select KRAIT_CLOCKS
help
Support for the Krait CPU clocks on Qualcomm devices.
Say Y if you want to support CPU frequency scaling.
+
+endif
--
Sent by a computer through tubes