[GIT PULL] SCSI fixes for 4.20-rc3
From: James Bottomley
Date: Thu Nov 22 2018 - 00:34:17 EST
Two small fixes. The qla2xxx is a regression from 4.18 and the ufs one
is a device enablement fix.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes
The short changelog is:
Bill Kuzeja (1):
scsi: qla2xxx: Timeouts occur on surprise removal of QLogic adapter
Wei Li (1):
scsi: ufs: Fix hynix ufs bug with quirk on hi36xx SoC
And the diffstat:
drivers/scsi/qla2xxx/qla_os.c | 10 ++++++++--
drivers/scsi/ufs/ufs-hisi.c | 9 +++++++++
drivers/scsi/ufs/ufs_quirks.h | 6 ++++++
drivers/scsi/ufs/ufshcd.c | 2 ++
4 files changed, 25 insertions(+), 2 deletions(-)
With full diff below.
James
---
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 20c85eed1a75..b658b9a5eb1e 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1749,7 +1749,7 @@ qla2x00_loop_reset(scsi_qla_host_t *vha)
static void
__qla2x00_abort_all_cmds(struct qla_qpair *qp, int res)
{
- int cnt;
+ int cnt, status;
unsigned long flags;
srb_t *sp;
scsi_qla_host_t *vha = qp->vha;
@@ -1799,10 +1799,16 @@ __qla2x00_abort_all_cmds(struct qla_qpair *qp, int res)
if (!sp_get(sp)) {
spin_unlock_irqrestore
(qp->qp_lock_ptr, flags);
- qla2xxx_eh_abort(
+ status = qla2xxx_eh_abort(
GET_CMD_SP(sp));
spin_lock_irqsave
(qp->qp_lock_ptr, flags);
+ /*
+ * Get rid of extra reference caused
+ * by early exit from qla2xxx_eh_abort
+ */
+ if (status == FAST_IO_FAIL)
+ atomic_dec(&sp->ref_count);
}
}
sp->done(sp, res);
diff --git a/drivers/scsi/ufs/ufs-hisi.c b/drivers/scsi/ufs/ufs-hisi.c
index 46df707e6f2c..452e19f8fb47 100644
--- a/drivers/scsi/ufs/ufs-hisi.c
+++ b/drivers/scsi/ufs/ufs-hisi.c
@@ -20,6 +20,7 @@
#include "unipro.h"
#include "ufs-hisi.h"
#include "ufshci.h"
+#include "ufs_quirks.h"
static int ufs_hisi_check_hibern8(struct ufs_hba *hba)
{
@@ -390,6 +391,14 @@ static void ufs_hisi_set_dev_cap(struct ufs_hisi_dev_params *hisi_param)
static void ufs_hisi_pwr_change_pre_change(struct ufs_hba *hba)
{
+ if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_VS_DEBUGSAVECONFIGTIME) {
+ pr_info("ufs flash device must set VS_DebugSaveConfigTime 0x10\n");
+ /* VS_DebugSaveConfigTime */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xD0A0), 0x10);
+ /* sync length */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x1556), 0x48);
+ }
+
/* update */
ufshcd_dme_set(hba, UIC_ARG_MIB(0x15A8), 0x1);
/* PA_TxSkip */
diff --git a/drivers/scsi/ufs/ufs_quirks.h b/drivers/scsi/ufs/ufs_quirks.h
index 71f73d1d1ad1..5d2dfdb41a6f 100644
--- a/drivers/scsi/ufs/ufs_quirks.h
+++ b/drivers/scsi/ufs/ufs_quirks.h
@@ -131,4 +131,10 @@ struct ufs_dev_fix {
*/
#define UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME (1 << 8)
+/*
+ * Some UFS devices require VS_DebugSaveConfigTime is 0x10,
+ * enabling this quirk ensure this.
+ */
+#define UFS_DEVICE_QUIRK_HOST_VS_DEBUGSAVECONFIGTIME (1 << 9)
+
#endif /* UFS_QUIRKS_H_ */
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 27db55b0ca7f..f1c57cd33b5b 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -231,6 +231,8 @@ static struct ufs_dev_fix ufs_fixups[] = {
UFS_FIX(UFS_VENDOR_SKHYNIX, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ),
UFS_FIX(UFS_VENDOR_SKHYNIX, UFS_ANY_MODEL,
UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME),
+ UFS_FIX(UFS_VENDOR_SKHYNIX, "hB8aL1" /*H28U62301AMR*/,
+ UFS_DEVICE_QUIRK_HOST_VS_DEBUGSAVECONFIGTIME),
END_FIX
};