Re: [PATCH 01/17] dt-bindings: remoteproc: Add TI PRUSS bindings

[Tony Lindgren]

Hi,

* Roger Quadros <rogerq@xxxxxx> [181122 11:39]:
> From: Suman Anna <s-anna@xxxxxx>
> +Example:
> +========
> +1.	/* AM33xx PRU-ICSS */
> +	pruss_soc_bus: pruss_soc_bus@4a326004 {
> +		compatible = "ti,am3356-pruss-soc-bus";
> +		ti,hwmods = "pruss";
> +		reg = <0x4a326004 0x4>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;

The top level interconnect target module driver should be just ti-sysc
as documented in Documentation/devicetree/bindings/bus/ti-sysc.txt.
AFAIK there is nothing PRU specific there. So let's not add yet
another custom interconnect target module handling code to deal with.

I also posted a patch a while back for using reset-simple with
ti-sysc as "[PATCHv2] reset: ti-rstctrl: use the reset-simple driver".

> +			pruss_cfg: cfg@4a326000 {
> +				compatible = "syscon";
> +				reg = <0x4a326000 0x2000>;
> +			};
> +
> +			pruss_iep: iep@4a32e000 {
> +				compatible = "syscon";
> +				reg = <0x4a32e000 0x31c>;
> +			};
> +
> +			pruss_mii_rt: mii_rt@4a332000 {
> +				compatible = "syscon";
> +				reg = <0x4a332000 0x58>;
> +			};

Hmm what are these syscon register actually doing? Sseems like
they should be just handled by a phy driver nowadays?

Other than that the binding looks OK to me. Good to finally
see some activity in getting the PRU support merged :)

Regards,

Tony