RE: [RFC PATCH v2 04/15] usb:cdns3: Driver initialization code.

From: Pawel Laszczak
Date: Sun Nov 25 2018 - 07:36:37 EST

Hi Roger

>On 18/11/18 12:09, Pawel Laszczak wrote:
>> Patch adds core.c and core.h file that implements initialization
>> of platform driver and adds function responsible for selecting,
>> switching and running appropriate Device/Host mode.
>>
>> Signed-off-by: Pawel Laszczak <pawell@xxxxxxxxxxx>
>> ---
>> drivers/usb/cdns3/Makefile | 2 +
>> drivers/usb/cdns3/core.c | 413 +++++++++++++++++++++++++++++++++++++
>> drivers/usb/cdns3/core.h | 100 +++++++++
>> 3 files changed, 515 insertions(+)
>> create mode 100644 drivers/usb/cdns3/core.c
>> create mode 100644 drivers/usb/cdns3/core.h
>>
>> diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
>> index dcdd62003c6a..02d25b23c5d3 100644
>> --- a/drivers/usb/cdns3/Makefile
>> +++ b/drivers/usb/cdns3/Makefile
>> @@ -1,3 +1,5 @@
>> +obj-$(CONFIG_USB_CDNS3) += cdns3.o
>> obj-$(CONFIG_USB_CDNS3_PCI_WRAP) += cdns3-pci.o
>>
>> +cdns3-y := core.o
>> cdns3-pci-y := cdns3-pci-wrap.o
>> diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
>> new file mode 100644
>> index 000000000000..f9055d4da67f
>> --- /dev/null
>> +++ b/drivers/usb/cdns3/core.c
>> @@ -0,0 +1,413 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Cadence USBSS DRD Driver.
>> + *
>> + * Copyright (C) 2018 Cadence.
>> + *
>> + * Author: Peter Chen <peter.chen@xxxxxxx>
>> + * Pawel Laszczak <pawell@xxxxxxxxxxx>
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/kernel.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/io.h>
>> +#include <linux/pm_runtime.h>
>> +
>> +#include "gadget.h"
>> +#include "core.h"
>> +
>> +static inline struct cdns3_role_driver *cdns3_get_current_role_driver(struct cdns3 *cdns)
>> +{
>> + WARN_ON(cdns->role >= CDNS3_ROLE_END || !cdns->roles[cdns->role]);
>> + return cdns->roles[cdns->role];
>> +}
>> +
>> +static inline int cdns3_role_start(struct cdns3 *cdns, enum cdns3_roles role)
>> +{
>> + int ret;
>> +
>> + if (role >= CDNS3_ROLE_END)
>
>WARN_ON()?
I agree.
>
>> + return 0;
>> +
>> + if (!cdns->roles[role])
>> + return -ENXIO;
>> +
>> + mutex_lock(&cdns->mutex);
>> + cdns->role = role;
>> + ret = cdns->roles[role]->start(cdns);
>> + mutex_unlock(&cdns->mutex);
>> + return ret;
>> +}
>> +
>> +static inline void cdns3_role_stop(struct cdns3 *cdns)
>> +{
>> + enum cdns3_roles role = cdns->role;
>> +
>> + if (role == CDNS3_ROLE_END)
>
>WARN_ON(role >= CNDS3_ROLE_END) ?
I agree
>
>> + return;
>> +
>> + mutex_lock(&cdns->mutex);
>> + cdns->roles[role]->stop(cdns);
>> + cdns->role = CDNS3_ROLE_END;
>
>Why change the role here? You are just stopping the role not changing it.
>I think cdns->role should remain unchanged, so we can call cdns3_role_start()
>if required without error.

This line is unnecessary.

>
>> + mutex_unlock(&cdns->mutex);
>> +}
>> +
>> +static enum cdns3_roles cdns3_get_role(struct cdns3 *cdns)
>> +{
>> + if (cdns->roles[CDNS3_ROLE_HOST] && cdns->roles[CDNS3_ROLE_GADGET]) {
>> + //TODO: implements selecting device/host mode
>> + return CDNS3_ROLE_HOST;
>> + }
>> + return cdns->roles[CDNS3_ROLE_HOST]
>> + ? CDNS3_ROLE_HOST
>> + : CDNS3_ROLE_GADGET;
>
>Why not just
> return cdns->role;
>
>I'm wondering if we really need this function

TODO will look likie:
if (cdns3_is_host(cdns))
return CDNS3_ROLE_HOST;
if (cdns3_is_device(cdns))
return CDNS3_ROLE_GADGET;

Function selects initial role. Before invoking it the role is unknown.
I think that function name should be changed because current name can be misleading.

I will change it to cdns3_get_initial_role.
.
>> +}
>
>> +
>> +/**
>> + * cdns3_core_init_role - initialize role of operation
>> + * @cdns: Pointer to cdns3 structure
>> + *
>> + * Returns 0 on success otherwise negative errno
>> + */
>> +static int cdns3_core_init_role(struct cdns3 *cdns)
>> +{
>> + struct device *dev = cdns->dev;
>> + enum usb_dr_mode dr_mode;
>> +
>> + dr_mode = usb_get_dr_mode(dev);
>> + cdns->role = CDNS3_ROLE_END;
>> +
>> + /*
>> + * If driver can't read mode by means of usb_get_dr_mdoe function then
>> + * chooses mode according with Kernel configuration. This setting
>> + * can be restricted later depending on strap pin configuration.
>> + */
>> + if (dr_mode == USB_DR_MODE_UNKNOWN) {
>> + if (IS_ENABLED(CONFIG_USB_CDNS3_HOST) &&
>> + IS_ENABLED(CONFIG_USB_CDNS3_GADGET))
>> + dr_mode = USB_DR_MODE_OTG;
>> + else if (IS_ENABLED(CONFIG_USB_CDNS3_HOST))
>> + dr_mode = USB_DR_MODE_HOST;
>> + else if (IS_ENABLED(CONFIG_USB_CDNS3_GADGET))
>> + dr_mode = USB_DR_MODE_PERIPHERAL;
>> + }
>> +
>> + if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
>> + //TODO: implements host initialization
>
> /* TODO: Add host role */ ?
>
>> + }
>> +
>> + if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
>> + //TODO: implements device initialization
>
> /* TODO: Add device role */ ?
>
>> + }
>> +
>> + if (!cdns->roles[CDNS3_ROLE_HOST] && !cdns->roles[CDNS3_ROLE_GADGET]) {
>> + dev_err(dev, "no supported roles\n");
>> + return -ENODEV;
>> + }
>> +
>> + cdns->dr_mode = dr_mode;
>> + return 0;
>> +}
>> +
>> +/**
>> + * cdns3_irq - interrupt handler for cdns3 core device
>> + *
>> + * @irq: irq number for cdns3 core device
>> + * @data: structure of cdns3
>> + *
>> + * Returns IRQ_HANDLED or IRQ_NONE
>> + */
>> +static irqreturn_t cdns3_irq(int irq, void *data)
>> +{
>> + struct cdns3 *cdns = data;
>> + irqreturn_t ret = IRQ_NONE;
>> +
>> + /* Handle device/host interrupt */
>> + if (cdns->role != CDNS3_ROLE_END)
>
>Is it because of this that you need to set role to END at role_stop?
>I think it is better to add a state variable to struct cdns3_role_driver, so we can
>check if it is active or stopped.
>
>e.g.
> if (cdns3_get_current_role_driver(cdns)->state == CDNS3_ROLE_STATE_ACTIVE)

Ok, I will do it in this way.
>> + ret = cdns3_get_current_role_driver(cdns)->irq(cdns);
>> +
>> + return ret;
>> +}
>> +
>> +static void cdns3_remove_roles(struct cdns3 *cdns)
>
>Should this be called cdns3_exit_roles() to be opposite of cdns3_init_roles()?

Sounds better.
I also change cdns3_host_remove to cdns3_host_exit and
cdns3_gadget_remove to cdns3_gadget_exit.
>
>> +{
>> + //TODO: implements this function
>> +}
>
>> +
>> +static int cdns3_do_role_switch(struct cdns3 *cdns, enum cdns3_roles role)
>> +{
>> + enum cdns3_roles current_role;
>> + int ret = 0;
>> +
>> + current_role = cdns->role;
>> +
>> + if (role == CDNS3_ROLE_END)
>> + return 0;
>
>role == END looks like error state. and it should never happen.
>WARN here?

Ok, will be changed.
>
>> +
>> + dev_dbg(cdns->dev, "Switching role");
>> +
>
>Don't you have to stop the previous role before starting the new role?
>
>> + ret = cdns3_role_start(cdns, role);
>> + if (ret) {
>> + /* Back to current role */
>> + dev_err(cdns->dev, "set %d has failed, back to %d\n",
>> + role, current_role);
>> + ret = cdns3_role_start(cdns, current_role);
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +/**
>> + * cdns3_role_switch - work queue handler for role switch
>> + *
>> + * @work: work queue item structure
>> + *
>> + * Handles below events:
>> + * - Role switch for dual-role devices
>> + * - CDNS3_ROLE_GADGET <--> CDNS3_ROLE_END for peripheral-only devices
>> + */
>> +static void cdns3_role_switch(struct work_struct *work)
>> +{
>> + enum cdns3_roles role = CDNS3_ROLE_END;
>> + struct cdns3 *cdns;
>> + bool device, host;
>> +
>> + cdns = container_of(work, struct cdns3, role_switch_wq);
>> +
>> + //TODO: implements this functions.
>> + //host = cdns3_is_host(cdns);
>> + //device = cdns3_is_device(cdns);
>> + host = 1;
>> + device = 0;
>> +
>> + if (host)
>> + role = CDNS3_ROLE_HOST;
>> + else if (device)
>> + role = CDNS3_ROLE_GADGET;
>> +
>> + if (cdns->desired_dr_mode == cdns->current_dr_mode &&
>> + cdns->role == role)
>> + return;
>> +
>
>I think all the below code can be moved to cdns3_do_role_switch().

Yes, I agree with you. cdns3_role_stop should be in cdns3_do_role_switch.

>> + pm_runtime_get_sync(cdns->dev);
>> + cdns3_role_stop(cdns);
>> +
>> + if (host) {
>> + if (cdns->roles[CDNS3_ROLE_HOST])
>> + cdns3_do_role_switch(cdns, CDNS3_ROLE_HOST);
>> + pm_runtime_put_sync(cdns->dev);
>> + return;
>> + }
>> +
>> + if (device)
>> + cdns3_do_role_switch(cdns, CDNS3_ROLE_GADGET);
>> + else
>> + cdns3_do_role_switch(cdns, CDNS3_ROLE_END);
>> +
>> + pm_runtime_put_sync(cdns->dev);
>> +}
>> +
>> +/**
>> + * cdns3_probe - probe for cdns3 core device
>> + * @pdev: Pointer to cdns3 core platform device
>> + *
>> + * Returns 0 on success otherwise negative errno
>> + */
>> +static int cdns3_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct resource *res;
>> + struct cdns3 *cdns;
>> + void __iomem *regs;
>> + int ret;
>> +
>> + cdns = devm_kzalloc(dev, sizeof(*cdns), GFP_KERNEL);
>> + if (!cdns)
>> + return -ENOMEM;
>> +
>> + cdns->dev = dev;
>> +
>> + platform_set_drvdata(pdev, cdns);
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
>> + if (!res) {
>> + dev_err(dev, "missing IRQ\n");
>> + return -ENODEV;
>> + }
>> + cdns->irq = res->start;
>> +
>> + /*
>> + * Request memory region
>> + * region-0: xHCI
>> + * region-1: Peripheral
>> + * region-2: OTG registers
>> + */
>
>The memory region order is different from the dt-binding.
>There it is OTG, host(xhci), device (peripheral).

I corrected dt-binding.
>
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + regs = devm_ioremap_resource(dev, res);
>> +
>> + if (IS_ERR(regs))
>> + return PTR_ERR(regs);
>> + cdns->xhci_regs = regs;
>> + cdns->xhci_res = res;
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
>> + regs = devm_ioremap_resource(dev, res);
>> + if (IS_ERR(regs))
>> + return PTR_ERR(regs);
>> + cdns->dev_regs = regs;
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
>> + regs = devm_ioremap_resource(dev, res);
>> + if (IS_ERR(regs))
>> + return PTR_ERR(regs);
>> + cdns->otg_regs = regs;
>> +
>> + mutex_init(&cdns->mutex);
>> +
>> + cdns->phy = devm_phy_get(dev, "cdns3,usbphy");
>
>"cdns3,usbphy" is not documented in dt-binding.

I assume that I should add to dt-binding (cdns3-usb.txt) something like:
- phys: reference to the USB PHY
- phy-names: name of the USB PHY, should be " cdns3,usbphy "

>
>> + if (IS_ERR(cdns->phy)) {
>> + dev_info(dev, "no generic phy found\n");
>> + cdns->phy = NULL;
>> + /*
>> + * fall through here!
>> + * if no generic phy found, phy init
>> + * should be done under boot!
>> + */
>
>No you shouldn't fall through always if it is an error condition.
>Something like this should work better.
>
> if (IS_ERR(cnds->phy)) {
> ret = PTR_ERR(cdns->phy);
> if (ret == -ENOSYS || ret == -ENODEV) {
> cdns->phy = NULL;
> } else if (ret == -EPROBE_DEFER) {
> return ret;
> } else {
> dev_err(dev, "no phy found\n");
> goto err0;
> }
> }
>
>So if PHY was provided in DT, and PHY support/drivers is present
>and error condition means something is wrong and we have to error out.
>
>> + } else {
>> + phy_init(cdns->phy);
>> + }
>
>You can do phy_init() outside the else.
>
Thank you for explanation. I will correct this.
>> +
>> + ret = cdns3_core_init_role(cdns);
>> + if (ret)
>> + goto err1;
>> +
>> + INIT_WORK(&cdns->role_switch_wq, cdns3_role_switch);
>> + if (ret)
>> + goto err2;
>> +
>> + if (ret)
>> + goto err2;
>> +
>> + cdns->role = cdns3_get_role(cdns);
>
>I think this should move to cd I'll have a some though on ns3_core_init_role().

Ok, I will do it.
>
>> +
>> + ret = devm_request_irq(dev, cdns->irq, cdns3_irq, IRQF_SHARED,
>> + dev_name(dev), cdns);
>> +
>> + if (ret)
>> + goto err2;
>
>How about moving request_irq to before cdsn3_core_init_role()?
>
>Then you can move cdns3_role_start() as well to core_init_role().
I'll give it some though on it, but probably I will probably have to change little other function..
So the new order should look like this:

cdns3_drd_init
devm_request_irq
cdns3_core_init_role, cdns3_get_role, cdns3_role_start

>
>> +
>> + ret = cdns3_role_start(cdns, cdns->role);
>> + if (ret) {
>> + dev_err(dev, "can't start %s role\n",
>> + cdns3_get_current_role_driver(cdns)->name);
>> + goto err2;
>> + }
>> +
>> + device_set_wakeup_capable(dev, true);
>> + pm_runtime_set_active(dev);
>> + pm_runtime_enable(dev);
>> +
>> + /*
>> + * The controller needs less time between bus and controller suspend,
>> + * and we also needs a small delay to avoid frequently entering low
>> + * power mode.
>> + */
>> + pm_runtime_set_autosuspend_delay(dev, 20);
>> + pm_runtime_mark_last_busy(dev);
>> + pm_runtime_use_autosuspend(dev);
>> + dev_dbg(dev, "Cadence USB3 core: probe succeed\n");
>> +
>> + return 0;
>> +
>> +err2:
>> + cdns3_remove_roles(cdns);
>> +err1:
>
>phy_exit() ?
I will add.
>
>> + return ret;
>> +}
>> +
>> +/**
>> + * cdns3_remove - unbind drd driver and clean up
>> + * @pdev: Pointer to Linux platform device
>> + *
>> + * Returns 0 on success otherwise negative errno
>> + */
>> +static int cdns3_remove(struct platform_device *pdev)
>> +{
>> + struct cdns3 *cdns = platform_get_drvdata(pdev);
>> +
>> + pm_runtime_get_sync(&pdev->dev);
>> + pm_runtime_disable(&pdev->dev);
>> + pm_runtime_put_noidle(&pdev->dev);
>> + cdns3_remove_roles(cdns);
>
>phy_exit() ?
I will add.
>
>> +
>> + return 0;
>> +}
>> +
>> +#ifdef CONFIG_OF
>> +static const struct of_device_id of_cdns3_match[] = {
>> + { .compatible = "cdns,usb3" },
>> + { },
>> +};
>> +MODULE_DEVICE_TABLE(of, of_cdns3_match);
>> +#endif
>> +
>> +#ifdef CONFIG_PM
>> +
>> +#ifdef CONFIG_PM_SLEEP
>> +static int cdns3_suspend(struct device *dev)
>> +{
>> + //TODO: implements this function
>> + return 0;
>> +}
>> +
>> +static int cdns3_resume(struct device *dev)
>> +{
>> + //TODO: implements this function
>> + return 0;
>> +}
>> +#endif /* CONFIG_PM_SLEEP */
>> +static int cdns3_runtime_suspend(struct device *dev)
>> +{ //TODO: implements this function
>> + return 0;
>> +}
>> +
>> +static int cdns3_runtime_resume(struct device *dev)
>> +{
>> + //TODO: implements this function
>> + return 0;
>> +}
>> +#endif /* CONFIG_PM */
>> +
>> +static const struct dev_pm_ops cdns3_pm_ops = {
>> + SET_SYSTEM_SLEEP_PM_OPS(cdns3_suspend, cdns3_resume)
>> + SET_RUNTIME_PM_OPS(cdns3_runtime_suspend, cdns3_runtime_resume, NULL)
>> +};
>> +
>> +static struct platform_driver cdns3_driver = {
>> + .probe = cdns3_probe,
>> + .remove = cdns3_remove,
>> + .driver = {
>> + .name = "cdns-usb3",
>> + .of_match_table = of_match_ptr(of_cdns3_match),
>> + .pm = &cdns3_pm_ops,
>> + },
>> +};
>> +
>> +static int __init cdns3_driver_platform_register(void)
>> +{
>> + return platform_driver_register(&cdns3_driver);
>> +}
>> +module_init(cdns3_driver_platform_register);
>> +
>> +static void __exit cdns3_driver_platform_unregister(void)
>> +{
>> + platform_driver_unregister(&cdns3_driver);
>> +}
>> +module_exit(cdns3_driver_platform_unregister);
>> +
>> +MODULE_ALIAS("platform:cdns3");
>> +MODULE_AUTHOR("Pawel Laszczak <pawell@xxxxxxxxxxx>");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_DESCRIPTION("Cadence USB3 DRD Controller Driver");
>> diff --git a/drivers/usb/cdns3/core.h b/drivers/usb/cdns3/core.h
>> new file mode 100644
>> index 000000000000..7c8204fe4d3d
>> --- /dev/null
>> +++ b/drivers/usb/cdns3/core.h
>> @@ -0,0 +1,100 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Cadence USBSS DRD Driver.
>> + *
>> + * Copyright (C) 2017 NXP
>> + * Copyright (C) 2018 Cadence.
>> + *
>> + * Authors: Peter Chen <peter.chen@xxxxxxx>
>> + * Pawel Laszczak <pawell@xxxxxxxxxxx>
>> + */
>> +#include <linux/usb/otg.h>
>> +
>> +#ifndef __LINUX_CDNS3_CORE_H
>> +#define __LINUX_CDNS3_CORE_H
>> +
>> +struct cdns3;
>> +enum cdns3_roles {
>> + CDNS3_ROLE_HOST = 0,
>> + CDNS3_ROLE_GADGET,
>> + CDNS3_ROLE_END,
>> +};
>> +
>> +/**
>> + * struct cdns3_role_driver - host/gadget role driver
>> + * @start: start this role
>> + * @stop: stop this role
>> + * @suspend: suspend callback for this role
>> + * @resume: resume callback for this role
>> + * @irq: irq handler for this role
>> + * @name: role name string (host/gadget)
>> + */
>> +struct cdns3_role_driver {
>> + int (*start)(struct cdns3 *cdns);
>> + void (*stop)(struct cdns3 *cdns);
>> + int (*suspend)(struct cdns3 *cdns, bool do_wakeup);
>> + int (*resume)(struct cdns3 *cdns, bool hibernated);
>> + irqreturn_t (*irq)(struct cdns3 *cdns);
>> + const char *name;
>> +};
>> +
>> +#define CDNS3_NUM_OF_CLKS 5
>> +/**
>> + * struct cdns3 - Representation of Cadence USB3 DRD controller.
>> + * @dev: pointer to Cadence device struct
>> + * @xhci_regs: pointer to base of xhci registers
>> + * @xhci_res: the resource for xhci
>> + * @dev_regs: pointer to base of dev registers
>> + * @otg_regs: pointer to base of otg registers
>> + * @irq: irq number for controller
>> + * @roles: array of supported roles for this controller
>> + * @role: current role
>> + * @host_dev: the child host device pointer for cdns3 core
>> + * @gadget_dev: the child gadget device pointer for cdns3 core
>> + * @usb: phy for this controller
>> + * @role_switch_wq: work queue item for role switch
>> + * @in_lpm: the controller in low power mode
>> + * @wakeup_int: the wakeup interrupt
>> + * @mutex: the mutex for concurrent code at driver
>> + * @dr_mode: supported mode of operation it can be only Host, only Device
>> + * or OTG mode that allow to switch between Device and Host mode.
>> + * This field based on hardware configuration and cant't be changed.
>
>But dr_mode can be forced in device-tree. So it isn't really only hardware configuration.
Right, I added dr_mode to dt-binding , so we have STRAP bits in registers and additionally
optional dr_mode in device-tree. Driver should take into account this two options.
I will remove this line.

>
>> + * @current_dr_role: current mode of operation when in dual-role mode
>> + * @desired_dr_role: desired mode of operation when in dual-role mode.
>> + * This value can be changed during runtime.
>> + * Available options depends on dr_mode:
>> + * dr_mode | desired_dr_role and current_dr_role
>> + * ----------------------------------------------------------------
>> + * USB_DR_MODE_HOST | only USB_DR_MODE_HOST
>> + * USB_DR_MODE_PERIPHERAL | only USB_DR_MODE_PERIPHERAL
>> + * USB_DR_MODE_OTG | only USB_DR_MODE_HOST
>> + * USB_DR_MODE_OTG | only USB_DR_MODE_PERIPHERAL
>> + * USB_DR_MODE_OTG | USB_DR_MODE_OTG
>
>Do you need to update the right hand side to reflect ROLEs instead of MODE?

I see that there are incorrect name. There should be mode instead role.
In structure below the names are correct.
>
>> + *
>> + * Desired_dr_role can be changed by means of debugfs.
>> + * @root: debugfs root folder pointer
>> + */
>> +struct cdns3 {
>> + struct device *dev;
>> + void __iomem *xhci_regs;
>> + struct resource *xhci_res;
>> + struct cdns3_usb_regs __iomem *dev_regs;
>> + struct cdns3_otg_regs *otg_regs;
>> + int irq;
>> + struct cdns3_role_driver *roles[CDNS3_ROLE_END];
>> + enum cdns3_roles role;
>> + struct device *host_dev;
>> + struct device *gadget_dev;
>> + struct phy *phy;
>> + struct work_struct role_switch_wq;
>> + int in_lpm:1;
>> + int wakeup_int:1;
>> + /* mutext used in workqueue*/
>> + struct mutex mutex;
>> + enum usb_dr_mode dr_mode;
>> + enum usb_dr_mode current_dr_mode;
>> + enum usb_dr_mode desired_dr_mode;
>> + struct dentry *root;
>> +};
>> +
>> +#endif /* __LINUX_CDNS3_CORE_H */
>>
>
>cheers,
>-roger
>--
>Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
>Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

Thank for all your comments,
Cheers,
Pawel