[PATCH v2 0/7] drm/msm/dsi: Get PHY ref clocks from the DT

[Matthias Kaehlcke]

The MSM DSI PHY drivers currently hardcode the name and the rate of
the PHY ref clock. Get the ref clock from the device tree instead.

Note: testing of this series was limited to SDM845 and the 10nm PHY

Major changes in v2:
- apply to all MSM DSI PHY drivers, not only 10nm

Matthias Kaehlcke (7):
  dt-bindings: msm/dsi: Add ref clock for PHYs
  drm/msm/dsi: 14nm PHY: Get ref clock from the DT
  drm/msm/dsi: 28nm 8960 PHY: Get ref clock from the DT
  arm64: dts: qcom: msm8916: Set 'xo_board' as ref clock of the DSI PHY
  drm/msm/dsi: 28nm PHY: Get ref clock from the DT
  arm64: dts: sdm845: Set 'bi_tcxo' as ref clock of the DSI PHYs
  drm/msm/dsi: 10nm PHY: Get ref clock from the DT

 .../devicetree/bindings/display/msm/dsi.txt   |  1 +
 arch/arm64/boot/dts/qcom/msm8916.dtsi         |  5 ++--
 arch/arm64/boot/dts/qcom/sdm845.dtsi          | 10 ++++---
 drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c    | 13 ++++++++-
 drivers/gpu/drm/msm/dsi/pll/dsi_pll_14nm.c    | 16 ++++++++--
 drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c    | 29 +++++++++++++------
 .../gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c   | 17 +++++++++--
 7 files changed, 69 insertions(+), 22 deletions(-)

-- 
2.20.0.rc0.387.gc7a69e6b6c-goog