[PATCH v5 1/2] gpio: Add driver for PC Engines APU boards
From: Florian Eckert
Date: Tue Nov 27 2018 - 08:25:35 EST
Add a new device driver "gpio-apu" which will handle the GPIOs on APU2
and APU3 devices from PC Engines.
APU2 (https://pcengines.ch/schema/apu2c.pdf page 7):
- G32 is "button_reset" connected to the smd-button on the frontpanel
- G50 is "mpcie2_reset" connected to mPCIe2 reset line
- G51 is "mpcie3_reset" connected to mPCIe3 reset line
APU3 (https://pcengines.ch/schema/apu3c.pdf page 7):
- G32 is "button_reset" connected to the smd-button on the frontpanel
- G50 is "mpcie2_reset" connected to mPCIe2 reset line
- G51 is "mpcie3_reset" connected to mPCIe3 reset line
- G33 is "simswap" connected to SIM switch IC to swap the SIM between
mPCIe2 and mPCIe3 slot
Signed-off-by: Florian Eckert <fe@xxxxxxxxxx>
---
drivers/gpio/Kconfig | 7 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-apu.c | 288 ++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 296 insertions(+)
create mode 100644 drivers/gpio/gpio-apu.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 833a1b51c948..e89937f6051e 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -117,6 +117,13 @@ config GPIO_AMDPT
driver for GPIO functionality on Promontory IOHub
Require ACPI ASL code to enumerate as a platform device.
+config GPIO_APU
+ tristate "PC Engines APU2/APU3 GPIO support"
+ depends on X86
+ help
+ Say Y here to support GPIO functionality on APU2/APU3 boards
+ from PC Engines.
+
config GPIO_ASPEED
tristate "Aspeed GPIO support"
depends on (ARCH_ASPEED || COMPILE_TEST) && OF_GPIO
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 671c4477c951..9c27523fb189 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_GPIO_ALTERA) += gpio-altera.o
obj-$(CONFIG_GPIO_ALTERA_A10SR) += gpio-altera-a10sr.o
obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o
obj-$(CONFIG_GPIO_AMDPT) += gpio-amdpt.o
+obj-$(CONFIG_GPIO_APU) += gpio-apu.o
obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o
obj-$(CONFIG_GPIO_ASPEED) += gpio-aspeed.o
diff --git a/drivers/gpio/gpio-apu.c b/drivers/gpio/gpio-apu.c
new file mode 100644
index 000000000000..609972d11847
--- /dev/null
+++ b/drivers/gpio/gpio-apu.c
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: GPL-2.0
+/* PC Engines APU2/APU3 GPIO device driver
+ *
+ * Copyright (C) 2018 Florian Eckert <fe@xxxxxxxxxx>
+ */
+
+#include <linux/bits.h>
+#include <linux/dmi.h>
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#define APU_FCH_ACPI_MMIO_BASE 0xFED80000
+#define APU_FCH_GPIO_BASE (APU_FCH_ACPI_MMIO_BASE + 0x1500)
+#define APU_GPIO_BIT_RD 16
+#define APU_GPIO_BIT_WR 22
+#define APU_GPIO_BIT_DIR 23
+
+struct apu_gpio_pdata {
+ struct gpio_chip chip;
+ unsigned long *offset; /* base register offset */
+ void __iomem **addr; /* remapped iomem addresses */
+ spinlock_t lock; /* lock register access */
+};
+
+static struct platform_device *apu_gpio_pdev;
+
+/* APU2 */
+static unsigned long apu2_gpio_offset[] = {
+ APU_FCH_GPIO_BASE + 89 * sizeof(u32),
+ APU_FCH_GPIO_BASE + 67 * sizeof(u32),
+ APU_FCH_GPIO_BASE + 66 * sizeof(u32),
+};
+static const char * const apu2_gpio_names[] = {
+ "button_reset",
+ "mpcie2_reset",
+ "mpcie3_reset",
+};
+
+/* APU3 */
+static unsigned long apu3_gpio_offset[] = {
+ APU_FCH_GPIO_BASE + 89 * sizeof(u32),
+ APU_FCH_GPIO_BASE + 67 * sizeof(u32),
+ APU_FCH_GPIO_BASE + 66 * sizeof(u32),
+ APU_FCH_GPIO_BASE + 90 * sizeof(u32),
+};
+static const char * const apu3_gpio_names[] = {
+ "button_reset",
+ "mpcie2_reset",
+ "mpcie3_reset",
+ "simswap",
+};
+
+static int gpio_apu_get_dir(struct gpio_chip *chip, unsigned int offset)
+{
+ u32 val;
+ struct apu_gpio_pdata *apu_gpio = gpiochip_get_data(chip);
+
+ spin_lock(&apu_gpio->lock);
+
+ val = ~ioread32(apu_gpio->addr[offset]);
+
+ spin_unlock(&apu_gpio->lock);
+
+ return !!(val & BIT(APU_GPIO_BIT_DIR));
+}
+
+static int gpio_apu_dir_in(struct gpio_chip *chip, unsigned int offset)
+{
+ u32 val;
+ struct apu_gpio_pdata *apu_gpio = gpiochip_get_data(chip);
+
+ spin_lock(&apu_gpio->lock);
+
+ val = ioread32(apu_gpio->addr[offset]);
+ val &= ~BIT(APU_GPIO_BIT_DIR);
+ iowrite32(val, apu_gpio->addr[offset]);
+
+ spin_unlock(&apu_gpio->lock);
+
+ return 0;
+}
+
+static int gpio_apu_dir_out(struct gpio_chip *chip, unsigned int offset,
+ int value)
+{
+ u32 val;
+ struct apu_gpio_pdata *apu_gpio = gpiochip_get_data(chip);
+
+ spin_lock(&apu_gpio->lock);
+
+ val = ioread32(apu_gpio->addr[offset]);
+ val |= BIT(APU_GPIO_BIT_DIR);
+ iowrite32(val, apu_gpio->addr[offset]);
+
+ spin_unlock(&apu_gpio->lock);
+
+ return 0;
+}
+
+static int gpio_apu_get_data(struct gpio_chip *chip, unsigned int offset)
+{
+ u32 val;
+ struct apu_gpio_pdata *apu_gpio = gpiochip_get_data(chip);
+
+ spin_lock(&apu_gpio->lock);
+
+ val = ioread32(apu_gpio->addr[offset]);
+
+ spin_unlock(&apu_gpio->lock);
+
+ return !!(val & BIT(APU_GPIO_BIT_RD));
+}
+
+static void gpio_apu_set_data(struct gpio_chip *chip, unsigned int offset,
+ int value)
+{
+ u32 val;
+ struct apu_gpio_pdata *apu_gpio = gpiochip_get_data(chip);
+
+ spin_lock(&apu_gpio->lock);
+
+ val = ioread32(apu_gpio->addr[offset]);
+ if (value)
+ val |= BIT(APU_GPIO_BIT_WR);
+ else
+ val &= ~BIT(APU_GPIO_BIT_WR);
+ iowrite32(val, apu_gpio->addr[offset]);
+
+ spin_unlock(&apu_gpio->lock);
+}
+
+static const struct dmi_system_id apu2_gpio_dmi_table[] __initconst = {
+ /* PC Engines APU2 with "Legacy" bios < 4.0.8 */
+ {
+ .ident = "apu2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
+ DMI_MATCH(DMI_BOARD_NAME, "APU2")
+ }
+ },
+ /* PC Engines APU2 with "Legacy" bios >= 4.0.8 */
+ {
+ .ident = "apu2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
+ DMI_MATCH(DMI_BOARD_NAME, "apu2")
+ }
+ },
+ /* PC Engines APU2 with "Mainline" bios */
+ {
+ .ident = "apu2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
+ DMI_MATCH(DMI_BOARD_NAME, "PC Engines apu2")
+ }
+ },
+ {}
+}
+MODULE_DEVICE_TABLE(dmi, apu2_gpio_dmi_table);
+
+static const struct dmi_system_id apu3_gpio_dmi_table[] __initconst = {
+ /* PC Engines APU3 with "Legacy" bios < 4.0.8 */
+ {
+ .ident = "apu3",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
+ DMI_MATCH(DMI_BOARD_NAME, "APU3")
+ }
+ },
+ /* PC Engines APU3 with "Legacy" bios >= 4.0.8 */
+ {
+ .ident = "apu3",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
+ DMI_MATCH(DMI_BOARD_NAME, "apu3")
+ }
+ },
+ /* PC Engines APU3 with "Mainline" bios */
+ {
+ .ident = "apu3",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
+ DMI_MATCH(DMI_BOARD_NAME, "PC Engines apu3")
+ }
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(dmi, apu3_gpio_dmi_table);
+
+static int __init apu_gpio_probe(struct platform_device *pdev)
+{
+ unsigned int i;
+ struct apu_gpio_pdata *apu_gpio;
+
+ apu_gpio = devm_kzalloc(&pdev->dev, sizeof(*apu_gpio), GFP_KERNEL);
+ if (!apu_gpio)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, apu_gpio);
+ spin_lock_init(&apu_gpio->lock);
+
+ apu_gpio->chip.label = KBUILD_MODNAME;
+ apu_gpio->chip.base = 20;
+ apu_gpio->chip.get_direction = gpio_apu_get_dir;
+ apu_gpio->chip.direction_input = gpio_apu_dir_in;
+ apu_gpio->chip.direction_output = gpio_apu_dir_out;
+ apu_gpio->chip.get = gpio_apu_get_data;
+ apu_gpio->chip.set = gpio_apu_set_data;
+
+ if (dmi_check_system(apu3_gpio_dmi_table)) {
+ apu_gpio->addr = devm_kzalloc(&pdev->dev,
+ sizeof(apu3_gpio_offset),
+ GFP_KERNEL);
+
+ if (!apu_gpio->addr)
+ return -ENOMEM;
+
+ apu_gpio->offset = apu3_gpio_offset;
+ apu_gpio->chip.names = apu3_gpio_names;
+ apu_gpio->chip.ngpio = ARRAY_SIZE(apu3_gpio_offset);
+ for (i = 0; i < ARRAY_SIZE(apu3_gpio_offset); i++) {
+ apu_gpio->addr[i] = devm_ioremap(&pdev->dev,
+ apu_gpio->offset[i], sizeof(u32));
+ if (!apu_gpio->addr[i])
+ return -ENOMEM;
+ }
+ } else if (dmi_check_system(apu2_gpio_dmi_table)) {
+ apu_gpio->addr = devm_kzalloc(&pdev->dev,
+ sizeof(apu2_gpio_offset),
+ GFP_KERNEL);
+
+ if (!apu_gpio->addr)
+ return -ENOMEM;
+
+ apu_gpio->offset = apu2_gpio_offset;
+ apu_gpio->chip.names = apu2_gpio_names;
+ apu_gpio->chip.ngpio = ARRAY_SIZE(apu2_gpio_offset);
+ for (i = 0; i < ARRAY_SIZE(apu2_gpio_offset); i++) {
+ apu_gpio->addr[i] = devm_ioremap(&pdev->dev,
+ apu_gpio->offset[i], sizeof(u32));
+ if (!apu_gpio->addr[i])
+ return -ENOMEM;
+ }
+ }
+
+ return devm_gpiochip_add_data(&pdev->dev, &apu_gpio->chip, apu_gpio);
+}
+
+static struct platform_driver apu_gpio_driver = {
+ .driver = {
+ .name = KBUILD_MODNAME,
+ },
+ .probe = apu_gpio_probe,
+};
+
+static int __init apu_gpio_init(void)
+{
+ if (!(dmi_check_system(apu2_gpio_dmi_table)) &&
+ !(dmi_check_system(apu3_gpio_dmi_table))) {
+ pr_err("No PC Engines board detected\n");
+ return -ENODEV;
+ }
+
+ apu_gpio_pdev = platform_device_register_simple(KBUILD_MODNAME,
+ -1, NULL, 0);
+ if (IS_ERR(apu_gpio_pdev))
+ return PTR_ERR(apu_gpio_pdev);
+
+
+ return platform_driver_register(&apu_gpio_driver);
+}
+
+static void __exit apu_gpio_exit(void)
+{
+ platform_device_unregister(apu_gpio_pdev);
+ platform_driver_unregister(&apu_gpio_driver);
+}
+
+module_init(apu_gpio_init);
+module_exit(apu_gpio_exit);
+
+MODULE_AUTHOR("Florian Eckert");
+MODULE_DESCRIPTION("PC Engines APU2/APU3 family GPIO driver");
+MODULE_LICENSE("GPL v2");
--
2.11.0