Re: DVB-S PCI card regression on 4.19 / 4.20

From: Takashi Iwai
Date: Tue Nov 27 2018 - 11:03:28 EST


On Tue, 27 Nov 2018 16:58:58 +0100,
stakanov wrote:
>
> In data martedà 27 novembre 2018 13:49:46 CET, Mauro Carvalho Chehab ha
> scritto:
> > Hi Stakanov,
> >
> > Em Tue, 27 Nov 2018 11:02:57 +0100
> >
> > stakanov <stakanov@xxxxxxxxxx> escreveu:
> > > In data lunedà 26 novembre 2018 14:31:09 CET, Takashi Iwai ha scritto:
> > > > On Fri, 23 Nov 2018 18:26:25 +0100,
> > > >
> > > > Mauro Carvalho Chehab wrote:
> > > > > Takashi,
> > > > >
> > > > > Could you please produce a Kernel for Stakanov to test
> > > > > with the following patches:
> > > > >
> > > > > https://patchwork.linuxtv.org/patch/53044/
> > > > > https://patchwork.linuxtv.org/patch/53045/
> > > > > https://patchwork.linuxtv.org/patch/53046/
> > > > > https://patchwork.linuxtv.org/patch/53128/
> > > >
> > > > Sorry for the late reaction. Now it's queued to OBS
> > > > home:tiwai:bsc1116374-2 repo. It'll be ready in an hour or so.
> > > > It's based on 4.20-rc4.
> > > >
> > > > Stakanov, please give it a try later.
> > > >
> > > >
> > > > thanks,
> > > >
> > > > Takashi
> > >
> > > O.K. this unbricks partially the card.
> >
> > From the logs, the Kernel is now working as expected.
> >
> > > Now hotbird does search and does sync
> > > on all channels. Quality is very good. Astra still does interrupt the
> > > search immediately and does not receive a thing. So it is a 50% brick
> > > still, but it is a huge progress compared to before.
> >
> > As I said before, you need to tell Kaffeine what's the LNBf that you're
> > using. The LNBf is a physical device[1] that it is installed on your
> > satellite dish. There's no way to auto-detect the model you actually have,
> > so you need to provide this information to the digital TV software you're
> > using.
> >
> > [1] It looks like this:
> > https://upload.wikimedia.org/wikipedia/commons/thumb/8/8c/Astra_lnb.jpg/
> 240
> > px-Astra_lnb.jpg
> >
> > The "Universal" one is for an old universal model sold in Europe about
> > 15 years ago. It doesn't support all transponders found on an Astra
> > satellite.
> >
> > For those, you need to use the LNBf that it is known as "Astra 1E"[2].
> >
> > [2] The name is there just for historical reasons. The actual Astra 1E
> > satellite was retired, but another satellite occupies the same orbital
> > position (19.2ÂE), and they keep adding/retiring satellites there as
> > needed (https://en.wikipedia.org/wiki/Astra_19.2%C2%B0E).
> >
> > As I pointed you on a past e-mail, when you set the DVB-S board on
> > Kaffeine, you should have explicitly set it.
> >
> > If you start Kaffeine in English:
> >
> > $ LANG=C kaffeine
> >
> > You'll see it at the following menu:
> >
> > Television -> Configure Television -> Device 0
> >
> > (assuming that your device is device 0)
> >
> > There, you need to tell that you'll be using a DiSEqC swith. It
> > will then allow you to select up to 4 satellite sources. Once you
> > set a source, it will allow you to edit the LNB <n> Settings
> > (where <n> will be 1 to 4). Clicking there, it will present you
> > a menu with all known LNBf models. Astra 1E is the third option[3].
> >
> > [3] yeah, on a separate discussion, we should likely rename "Astra 1E"
> > to just "Astra", and place it as the first option. I'll do such change,
> > but it will be at v4l-utils package (libdvbv5) and it will probably
> > take some time until distros start packaging the new version, even
> > if we add it to the stable branch.
> >
> > > I paste the output of the directory below, unfortunately the opensuse
> > > paste
> > > does not work currently so I try here, sorry if this is long.
> > >
> > > Content of the directory 99-media.conf created following the indications
> > > (please bear in mind that I have also another card installed (Hauppauge
> > > 5525) although it was not branched to the sat cable and i did change the
> > > settings in Kaffeine to use only the technisat. But my understanding is
> > > limited if this may give "noise" in the output, so I thought to underline
> > > it, just FYI.
> > > Output:
> > Looks ok to me.
> >
> > > [ 649.009548] cx23885 0000:03:00.0: invalid short VPD tag 01 at offset 1
> > > [ 649.011439] r8169 0000:06:00.0: invalid short VPD tag 00 at offset 1
> >
> > Those two above are weird... It seems to be related to some issue that
> > the PCI core detected:
> >
> > drivers/pci/vpd.c: pci_warn(dev, "invalid %s VPD tag
> > %02x at offset %zu",
> >
> > I've no idea what they mean, nor if you'll face any issues related to it.
> >
> > Thanks,
> > Mauro
> The two are known annoyances especially the cx23885 complaining in the logs
> about a "wrong revision". But as they AFAIK do not cause major issues or
> havoc, it is not a problem, at least for me.
> Now, the card suddenly works. The only thing you have to do (limited to this
> technisat PCI card, not applicable to the Hauppauge PCI-e mounted on the same
> machine) is to set the "square" to high voltage, limited for Astra. Hotbird
> scans better without this, with "no setting send" as I do for the Hauppauge as
> well.
> This must be something weird related to our sat dish.
>
> But the GOOD news is: yes now you made it! The card works. And yes, you should
> really rename ASTRA E setting. Maybe also be more clear or give some hint in
> kaffeine when hovering over it, about how to set it, for some reason it came
> straightforward to me to click on the right radio button to select the type of
> satellite, but I did not understand, nor did suspect, I would be able to set,
> or that I would have to set the left button (must be a cultural deformation,
> or whatever). Once you told me about I did find it, but in my very limited
> experience, I think that could be enhanced.
>
> So congratulations. It works and now I am officially even more impressed about
> Linux and the spirit behind it. Compliments and thank you all for your work
> and time!

Good to hear that now everything nailed down.
So, the patch
https://patchwork.linuxtv.org/patch/53128/
is needed in addition to
https://patchwork.linuxtv.org/patch/53044/
?

If so, Mauro, please don't forget to put Fixes and stable tags, so
that both will be backported to stable trees.

Meanwhile I'll backport it to openSUSE kernels so that the issue will
be fixed in the next kernel update.


Thanks!

Takashi