Re: [PATCH 02/15] dt-bindings: rtc: sun6i-rtc: Add compatible strings for pre-H6 variants

[Maxime Ripard]

On Wed, Nov 28, 2018 at 05:29:59PM +0800, Chen-Yu Tsai wrote:
> While doing Bluetooth enablement for various boards based on various
> Allwinner SoCs, minor differences in the RTC modules were found. These
> include a lack of an external clock output (A31), different internal
> oscillator frequencies (H3/H5/A64/V3/V3s), different regulator voltage
> settings (H5/H6), and the presence of miscellaneous registers unrelated
> to the RTC (A64/R40/H5/H6). The datasheet also describes different number
> of registers for non-volatile storage, though based on actual experiments
> the actual number is the same across the board.
> 
> This patch adds a list of all pre-H6 variants, grouped by the internal
> oscillator's clock rate, regulator settings, and the presence of the
> external clock output. Combinations are introduced for the variants that
> have miscellaneous registers.
> 
> The RTC block in the H6 also handles the 24 MHz DCXO. This will require
> more device tree binding changes and will be done later.
> 
> Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>

Acked-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Attachment: signature.asc
Description: PGP signature