[PATCH v5 13/17] clk: sunxi-ng: add support for suniv F1C100s SoC
From: Mesih Kilinc
Date: Wed Nov 28 2018 - 17:35:31 EST
The suniv F1C100s SoC (the chip in some new F-series products of
Allwinner)
has a CCU which seems to be a stripped version of the CCU in SoCs after
sun6i.
Add support for the CCU.
Signed-off-by: Mesih Kilinc <mesihkilinc@xxxxxxxxx>
Acked-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
---
drivers/clk/sunxi-ng/Kconfig | 5 +
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c | 541 +++++++++++++++++++++++++++++++
drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h | 34 ++
4 files changed, 581 insertions(+)
create mode 100644 drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c
create mode 100644 drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 826674d..429ea4a 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -6,6 +6,11 @@ config SUNXI_CCU
if SUNXI_CCU
+config SUNIV_F1C100S_CCU
+ bool "Support for the Allwinner newer F1C100s CCU"
+ default MACH_SUNIV
+ depends on MACH_SUNIV || COMPILE_TEST
+
config SUN50I_A64_CCU
bool "Support for the Allwinner A64 CCU"
default ARM64 && ARCH_SUNXI
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 4945470..4c7bee8 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -21,6 +21,7 @@ obj-y += ccu_nm.o
obj-y += ccu_mp.o
# SoC support
+obj-$(CONFIG_SUNIV_F1C100S_CCU) += ccu-suniv-f1c100s.o
obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-a64.o
obj-$(CONFIG_SUN50I_H6_CCU) += ccu-sun50i-h6.o
obj-$(CONFIG_SUN50I_H6_R_CCU) += ccu-sun50i-h6-r.o
diff --git a/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c b/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c
new file mode 100644
index 0000000..d4bc1b8
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c
@@ -0,0 +1,541 @@
+/*
+ * Copyright (c) 2016 Icenowy Zheng <icenowy@xxxxxxx>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-suniv-f1c100s.h"
+
+static struct ccu_nkmp pll_cpu_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+
+ .n = _SUNXI_CCU_MULT(8, 5),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .m = _SUNXI_CCU_DIV(0, 2),
+ /* MAX is guessed by the BSP table */
+ .p = _SUNXI_CCU_DIV_MAX(16, 2, 4),
+
+ .common = {
+ .reg = 0x000,
+ .hw.init = CLK_HW_INIT("pll-cpu", "osc24M",
+ &ccu_nkmp_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+/*
+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
+ * the base (2x, 4x and 8x), and one variable divider (the one true
+ * pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names
+ */
+#define SUNIV_PLL_AUDIO_REG 0x008
+
+static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
+ "osc24M", 0x008,
+ 8, 7, /* N */
+ 0, 5, /* M */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ CLK_SET_RATE_UNGATE);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video_clk, "pll-video",
+ "osc24M", 0x010,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ CLK_SET_RATE_UNGATE);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
+ "osc24M", 0x018,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ CLK_SET_RATE_UNGATE);
+
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr0_clk, "pll-ddr",
+ "osc24M", 0x020,
+ 8, 5, /* N */
+ 4, 2, /* K */
+ 0, 2, /* M */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ CLK_IS_CRITICAL);
+
+static struct ccu_nk pll_periph_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .n = _SUNXI_CCU_MULT(8, 5),
+ .common = {
+ .reg = 0x028,
+ .hw.init = CLK_HW_INIT("pll-periph", "osc24M",
+ &ccu_nk_ops, 0),
+ },
+};
+
+static const char * const cpu_parents[] = { "osc32k", "osc24M",
+ "pll-cpu", "pll-cpu" };
+static SUNXI_CCU_MUX(cpu_clk, "cpu", cpu_parents,
+ 0x050, 16, 2, CLK_IS_CRITICAL | CLK_SET_RATE_PARENT);
+
+static const char * const ahb_parents[] = { "osc32k", "osc24M",
+ "cpu", "pll-periph" };
+static const struct ccu_mux_var_prediv ahb_predivs[] = {
+ { .index = 3, .shift = 6, .width = 2 },
+};
+static struct ccu_div ahb_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+ .mux = {
+ .shift = 12,
+ .width = 2,
+
+ .var_predivs = ahb_predivs,
+ .n_var_predivs = ARRAY_SIZE(ahb_predivs),
+ },
+
+ .common = {
+ .reg = 0x054,
+ .features = CCU_FEATURE_VARIABLE_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("ahb",
+ ahb_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct clk_div_table apb_div_table[] = {
+ { .val = 0, .div = 2 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 4 },
+ { .val = 3, .div = 8 },
+ { /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb_clk, "apb", "ahb",
+ 0x054, 8, 2, apb_div_table, 0);
+
+static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "ahb",
+ 0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb",
+ 0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb",
+ 0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "ahb",
+ 0x060, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb",
+ 0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb",
+ 0x060, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb",
+ 0x060, BIT(24), 0);
+
+static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "ahb",
+ 0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_lcd_clk, "bus-lcd", "ahb",
+ 0x064, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_deinterlace_clk, "bus-deinterlace", "ahb",
+ 0x064, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_csi_clk, "bus-csi", "ahb",
+ 0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_tvd_clk, "bus-tvd", "ahb",
+ 0x064, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_tve_clk, "bus-tve", "ahb",
+ 0x064, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_de_be_clk, "bus-de-be", "ahb",
+ 0x064, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_de_fe_clk, "bus-de-fe", "ahb",
+ 0x064, BIT(14), 0);
+
+static SUNXI_CCU_GATE(bus_codec_clk, "bus-codec", "apb",
+ 0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb",
+ 0x068, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_ir_clk, "bus-ir", "apb",
+ 0x068, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_rsb_clk, "bus-rsb", "apb",
+ 0x068, BIT(3), 0);
+static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb",
+ 0x068, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb",
+ 0x068, BIT(16), 0);
+static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb",
+ 0x068, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb",
+ 0x068, BIT(18), 0);
+static SUNXI_CCU_GATE(bus_pio_clk, "bus-pio", "apb",
+ 0x068, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb",
+ 0x068, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb",
+ 0x068, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb",
+ 0x068, BIT(22), 0);
+
+static const char * const mod0_default_parents[] = { "osc24M", "pll-periph" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_PHASE(mmc0_sample_clk, "mmc0_sample", "mmc0",
+ 0x088, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc0_output_clk, "mmc0_output", "mmc0",
+ 0x088, 8, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_PHASE(mmc1_sample_clk, "mmc1_sample", "mmc1",
+ 0x08c, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc1_output_clk, "mmc1_output", "mmc1",
+ 0x08c, 8, 3, 0);
+
+static const char * const i2s_spdif_parents[] = { "pll-audio-8x",
+ "pll-audio-4x",
+ "pll-audio-2x",
+ "pll-audio" };
+
+static SUNXI_CCU_MUX_WITH_GATE(i2s_clk, "i2s", i2s_spdif_parents,
+ 0x0b0, 16, 2, BIT(31), 0);
+
+static SUNXI_CCU_MUX_WITH_GATE(spdif_clk, "spdif", i2s_spdif_parents,
+ 0x0b4, 16, 2, BIT(31), 0);
+
+/* The BSP header file has a CIR_CFG, but no mod clock uses this definition */
+
+static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M",
+ 0x0cc, BIT(8), 0);
+
+static SUNXI_CCU_GATE(dram_ve_clk, "dram-ve", "pll-ddr",
+ 0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi_clk, "dram-csi", "pll-ddr",
+ 0x100, BIT(1), 0);
+static SUNXI_CCU_GATE(dram_deinterlace_clk, "dram-deinterlace",
+ "pll-ddr", 0x100, BIT(2), 0);
+static SUNXI_CCU_GATE(dram_tvd_clk, "dram-tvd", "pll-ddr",
+ 0x100, BIT(3), 0);
+static SUNXI_CCU_GATE(dram_de_fe_clk, "dram-de-fe", "pll-ddr",
+ 0x100, BIT(24), 0);
+static SUNXI_CCU_GATE(dram_de_be_clk, "dram-de-be", "pll-ddr",
+ 0x100, BIT(26), 0);
+
+static const char * const de_parents[] = { "pll-video", "pll-periph" };
+static const u8 de_table[] = { 0, 2, };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(de_be_clk, "de-be",
+ de_parents, de_table,
+ 0x104, 0, 4, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(de_fe_clk, "de-fe",
+ de_parents, de_table,
+ 0x10c, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const tcon_parents[] = { "pll-video", "pll-video-2x" };
+static const u8 tcon_table[] = { 0, 2, };
+static SUNXI_CCU_MUX_TABLE_WITH_GATE(tcon_clk, "tcon",
+ tcon_parents, tcon_table,
+ 0x118, 24, 3, BIT(31),
+ CLK_SET_RATE_PARENT);
+
+static const char * const deinterlace_parents[] = { "pll-video",
+ "pll-video-2x" };
+static const u8 deinterlace_table[] = { 0, 2, };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(deinterlace_clk, "deinterlace",
+ deinterlace_parents, deinterlace_table,
+ 0x11c, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const tve_clk2_parents[] = { "pll-video",
+ "pll-video-2x" };
+static const u8 tve_clk2_table[] = { 0, 2, };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(tve_clk2_clk, "tve-clk2",
+ tve_clk2_parents, tve_clk2_table,
+ 0x120, 0, 4, 24, 3, BIT(31), 0);
+static SUNXI_CCU_M_WITH_GATE(tve_clk1_clk, "tve-clk1", "tve-clk2",
+ 0x120, 8, 1, BIT(15), 0);
+
+static const char * const tvd_parents[] = { "pll-video", "osc24M",
+ "pll-video-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(tvd_clk, "tvd", tvd_parents,
+ 0x124, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const csi_parents[] = { "pll-video", "osc24M" };
+static const u8 csi_table[] = { 0, 5, };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi_clk, "csi", csi_parents, csi_table,
+ 0x120, 0, 4, 8, 3, BIT(15), 0);
+
+/*
+ * TODO: BSP says the parent is pll-audio, however common sense and experience
+ * told us it should be pll-ve. pll-ve is totally not used in BSP code.
+ */
+static SUNXI_CCU_GATE(ve_clk, "ve", "pll-audio", 0x13c, BIT(31), 0);
+
+static SUNXI_CCU_GATE(codec_clk, "codec", "pll-audio", 0x140, BIT(31), 0);
+
+static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M", 0x144, BIT(31), 0);
+
+static struct ccu_common *suniv_ccu_clks[] = {
+ &pll_cpu_clk.common,
+ &pll_audio_base_clk.common,
+ &pll_video_clk.common,
+ &pll_ve_clk.common,
+ &pll_ddr0_clk.common,
+ &pll_periph_clk.common,
+ &cpu_clk.common,
+ &ahb_clk.common,
+ &apb_clk.common,
+ &bus_dma_clk.common,
+ &bus_mmc0_clk.common,
+ &bus_mmc1_clk.common,
+ &bus_dram_clk.common,
+ &bus_spi0_clk.common,
+ &bus_spi1_clk.common,
+ &bus_otg_clk.common,
+ &bus_ve_clk.common,
+ &bus_lcd_clk.common,
+ &bus_deinterlace_clk.common,
+ &bus_csi_clk.common,
+ &bus_tve_clk.common,
+ &bus_tvd_clk.common,
+ &bus_de_be_clk.common,
+ &bus_de_fe_clk.common,
+ &bus_codec_clk.common,
+ &bus_spdif_clk.common,
+ &bus_ir_clk.common,
+ &bus_rsb_clk.common,
+ &bus_i2s0_clk.common,
+ &bus_i2c0_clk.common,
+ &bus_i2c1_clk.common,
+ &bus_i2c2_clk.common,
+ &bus_pio_clk.common,
+ &bus_uart0_clk.common,
+ &bus_uart1_clk.common,
+ &bus_uart2_clk.common,
+ &mmc0_clk.common,
+ &mmc0_sample_clk.common,
+ &mmc0_output_clk.common,
+ &mmc1_clk.common,
+ &mmc1_sample_clk.common,
+ &mmc1_output_clk.common,
+ &i2s_clk.common,
+ &spdif_clk.common,
+ &usb_phy0_clk.common,
+ &dram_ve_clk.common,
+ &dram_csi_clk.common,
+ &dram_deinterlace_clk.common,
+ &dram_tvd_clk.common,
+ &dram_de_fe_clk.common,
+ &dram_de_be_clk.common,
+ &de_be_clk.common,
+ &de_fe_clk.common,
+ &tcon_clk.common,
+ &deinterlace_clk.common,
+ &tve_clk2_clk.common,
+ &tve_clk1_clk.common,
+ &tvd_clk.common,
+ &csi_clk.common,
+ &ve_clk.common,
+ &codec_clk.common,
+ &avs_clk.common,
+};
+
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+ "pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+ "pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+ "pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
+ "pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_video_2x_clk, "pll-video-2x",
+ "pll-video", 1, 2, 0);
+
+static struct clk_hw_onecell_data suniv_hw_clks = {
+ .hws = {
+ [CLK_PLL_CPU] = &pll_cpu_clk.common.hw,
+ [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
+ [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
+ [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
+ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
+ [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
+ [CLK_PLL_VIDEO] = &pll_video_clk.common.hw,
+ [CLK_PLL_VIDEO_2X] = &pll_video_2x_clk.hw,
+ [CLK_PLL_VE] = &pll_ve_clk.common.hw,
+ [CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw,
+ [CLK_PLL_PERIPH] = &pll_periph_clk.common.hw,
+ [CLK_CPU] = &cpu_clk.common.hw,
+ [CLK_AHB] = &ahb_clk.common.hw,
+ [CLK_APB] = &apb_clk.common.hw,
+ [CLK_BUS_DMA] = &bus_dma_clk.common.hw,
+ [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
+ [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
+ [CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
+ [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
+ [CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
+ [CLK_BUS_OTG] = &bus_otg_clk.common.hw,
+ [CLK_BUS_VE] = &bus_ve_clk.common.hw,
+ [CLK_BUS_LCD] = &bus_lcd_clk.common.hw,
+ [CLK_BUS_DEINTERLACE] = &bus_deinterlace_clk.common.hw,
+ [CLK_BUS_CSI] = &bus_csi_clk.common.hw,
+ [CLK_BUS_TVD] = &bus_tvd_clk.common.hw,
+ [CLK_BUS_TVE] = &bus_tve_clk.common.hw,
+ [CLK_BUS_DE_BE] = &bus_de_be_clk.common.hw,
+ [CLK_BUS_DE_FE] = &bus_de_fe_clk.common.hw,
+ [CLK_BUS_CODEC] = &bus_codec_clk.common.hw,
+ [CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
+ [CLK_BUS_IR] = &bus_ir_clk.common.hw,
+ [CLK_BUS_RSB] = &bus_rsb_clk.common.hw,
+ [CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
+ [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
+ [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
+ [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
+ [CLK_BUS_PIO] = &bus_pio_clk.common.hw,
+ [CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
+ [CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
+ [CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
+ [CLK_MMC0] = &mmc0_clk.common.hw,
+ [CLK_MMC0_SAMPLE] = &mmc0_sample_clk.common.hw,
+ [CLK_MMC0_OUTPUT] = &mmc0_output_clk.common.hw,
+ [CLK_MMC1] = &mmc1_clk.common.hw,
+ [CLK_MMC1_SAMPLE] = &mmc1_sample_clk.common.hw,
+ [CLK_MMC1_OUTPUT] = &mmc1_output_clk.common.hw,
+ [CLK_I2S] = &i2s_clk.common.hw,
+ [CLK_SPDIF] = &spdif_clk.common.hw,
+ [CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
+ [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
+ [CLK_DRAM_CSI] = &dram_csi_clk.common.hw,
+ [CLK_DRAM_DEINTERLACE] = &dram_deinterlace_clk.common.hw,
+ [CLK_DRAM_TVD] = &dram_tvd_clk.common.hw,
+ [CLK_DRAM_DE_FE] = &dram_de_fe_clk.common.hw,
+ [CLK_DRAM_DE_BE] = &dram_de_be_clk.common.hw,
+ [CLK_DE_BE] = &de_be_clk.common.hw,
+ [CLK_DE_FE] = &de_fe_clk.common.hw,
+ [CLK_TCON] = &tcon_clk.common.hw,
+ [CLK_DEINTERLACE] = &deinterlace_clk.common.hw,
+ [CLK_TVE2_CLK] = &tve_clk2_clk.common.hw,
+ [CLK_TVE1_CLK] = &tve_clk1_clk.common.hw,
+ [CLK_TVD] = &tvd_clk.common.hw,
+ [CLK_CSI] = &csi_clk.common.hw,
+ [CLK_VE] = &ve_clk.common.hw,
+ [CLK_CODEC] = &codec_clk.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ },
+ .num = CLK_NUMBER,
+};
+
+static struct ccu_reset_map suniv_ccu_resets[] = {
+ [RST_USB_PHY0] = { 0x0cc, BIT(0) },
+
+ [RST_BUS_DMA] = { 0x2c0, BIT(6) },
+ [RST_BUS_MMC0] = { 0x2c0, BIT(8) },
+ [RST_BUS_MMC1] = { 0x2c0, BIT(9) },
+ [RST_BUS_DRAM] = { 0x2c0, BIT(14) },
+ [RST_BUS_SPI0] = { 0x2c0, BIT(20) },
+ [RST_BUS_SPI1] = { 0x2c0, BIT(21) },
+ [RST_BUS_OTG] = { 0x2c0, BIT(24) },
+ [RST_BUS_VE] = { 0x2c4, BIT(0) },
+ [RST_BUS_LCD] = { 0x2c4, BIT(4) },
+ [RST_BUS_DEINTERLACE] = { 0x2c4, BIT(5) },
+ [RST_BUS_CSI] = { 0x2c4, BIT(8) },
+ [RST_BUS_TVD] = { 0x2c4, BIT(9) },
+ [RST_BUS_TVE] = { 0x2c4, BIT(10) },
+ [RST_BUS_DE_BE] = { 0x2c4, BIT(12) },
+ [RST_BUS_DE_FE] = { 0x2c4, BIT(14) },
+ [RST_BUS_CODEC] = { 0x2d0, BIT(0) },
+ [RST_BUS_SPDIF] = { 0x2d0, BIT(1) },
+ [RST_BUS_IR] = { 0x2d0, BIT(2) },
+ [RST_BUS_RSB] = { 0x2d0, BIT(3) },
+ [RST_BUS_I2S0] = { 0x2d0, BIT(12) },
+ [RST_BUS_I2C0] = { 0x2d0, BIT(16) },
+ [RST_BUS_I2C1] = { 0x2d0, BIT(17) },
+ [RST_BUS_I2C2] = { 0x2d0, BIT(18) },
+ [RST_BUS_UART0] = { 0x2d0, BIT(20) },
+ [RST_BUS_UART1] = { 0x2d0, BIT(21) },
+ [RST_BUS_UART2] = { 0x2d0, BIT(22) },
+};
+
+static const struct sunxi_ccu_desc suniv_ccu_desc = {
+ .ccu_clks = suniv_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(suniv_ccu_clks),
+
+ .hw_clks = &suniv_hw_clks,
+
+ .resets = suniv_ccu_resets,
+ .num_resets = ARRAY_SIZE(suniv_ccu_resets),
+};
+
+static struct ccu_pll_nb suniv_pll_cpu_nb = {
+ .common = &pll_cpu_clk.common,
+ /* copy from pll_cpu_clk */
+ .enable = BIT(31),
+ .lock = BIT(28),
+};
+
+static struct ccu_mux_nb suniv_cpu_nb = {
+ .common = &cpu_clk.common,
+ .cm = &cpu_clk.mux,
+ .delay_us = 1, /* > 8 clock cycles at 24 MHz */
+ .bypass_index = 1, /* index of 24 MHz oscillator */
+};
+
+static void __init suniv_f1c100s_ccu_setup(struct device_node *node)
+{
+ void __iomem *reg;
+ u32 val;
+
+ reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+ if (IS_ERR(reg)) {
+ pr_err("%pOF: Could not map the clock registers\n", node);
+ return;
+ }
+
+ /* Force the PLL-Audio-1x divider to 4 */
+ val = readl(reg + SUNIV_PLL_AUDIO_REG);
+ val &= ~GENMASK(19, 16);
+ writel(val | (3 << 16), reg + SUNIV_PLL_AUDIO_REG);
+
+ sunxi_ccu_probe(node, reg, &suniv_ccu_desc);
+
+ /* Gate then ungate PLL CPU after any rate changes */
+ ccu_pll_notifier_register(&suniv_pll_cpu_nb);
+
+ /* Reparent CPU during PLL CPU rate changes */
+ ccu_mux_notifier_register(pll_cpu_clk.common.hw.clk,
+ &suniv_cpu_nb);
+}
+CLK_OF_DECLARE(suniv_f1c100s_ccu, "allwinner,suniv-f1c100s-ccu",
+ suniv_f1c100s_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h b/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h
new file mode 100644
index 0000000..1da687a
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2017 Icenowy Zheng <icenowy@xxxxxxx>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _CCU_SUNIV_F1C100S_H_
+#define _CCU_SUNIV_F1C100S_H_
+
+#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
+#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
+
+#define CLK_PLL_CPU 0
+#define CLK_PLL_AUDIO_BASE 1
+#define CLK_PLL_AUDIO 2
+#define CLK_PLL_AUDIO_2X 3
+#define CLK_PLL_AUDIO_4X 4
+#define CLK_PLL_AUDIO_8X 5
+#define CLK_PLL_VIDEO 6
+#define CLK_PLL_VIDEO_2X 7
+#define CLK_PLL_VE 8
+#define CLK_PLL_DDR0 9
+#define CLK_PLL_PERIPH 10
+
+/* CPU clock is exported */
+
+#define CLK_AHB 12
+#define CLK_APB 13
+
+/* All bus gates, DRAM gates and mod clocks are exported */
+
+#define CLK_NUMBER (CLK_AVS + 1)
+
+#endif /* _CCU_SUNIV_F1C100S_H_ */
--
2.7.4