[PATCH 4.4 02/86] usb: xhci: fix timeout for transition from RExit to U0

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aaron Ma <aaron.ma@xxxxxxxxxxxxx>

commit a5baeaeabcca3244782a9b6382ebab6f8a58f583 upstream.

This definition is used by msecs_to_jiffies in milliseconds.
According to the comments, max rexit timeout should be 20ms.
Align with the comments to properly calculate the delay.

Verified on Sunrise Point-LP and Cannon Lake.

Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Aaron Ma <aaron.ma@xxxxxxxxxxxxx>
Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/usb/host/xhci-hub.c |    4 ++--
 drivers/usb/host/xhci.h     |    2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -790,7 +790,7 @@ static u32 xhci_get_port_status(struct u
 			time_left = wait_for_completion_timeout(
 					&bus_state->rexit_done[wIndex],
 					msecs_to_jiffies(
-						XHCI_MAX_REXIT_TIMEOUT));
+						XHCI_MAX_REXIT_TIMEOUT_MS));
 			spin_lock_irqsave(&xhci->lock, flags);
 
 			if (time_left) {
@@ -804,7 +804,7 @@ static u32 xhci_get_port_status(struct u
 			} else {
 				int port_status = readl(port_array[wIndex]);
 				xhci_warn(xhci, "Port resume took longer than %i msec, port status = 0x%x\n",
-						XHCI_MAX_REXIT_TIMEOUT,
+						XHCI_MAX_REXIT_TIMEOUT_MS,
 						port_status);
 				status |= USB_PORT_STAT_SUSPEND;
 				clear_bit(wIndex, &bus_state->rexit_ports);
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1490,7 +1490,7 @@ struct xhci_bus_state {
  * It can take up to 20 ms to transition from RExit to U0 on the
  * Intel Lynx Point LP xHCI host.
  */
-#define	XHCI_MAX_REXIT_TIMEOUT	(20 * 1000)
+#define	XHCI_MAX_REXIT_TIMEOUT_MS	20
 
 static inline unsigned int hcd_index(struct usb_hcd *hcd)
 {