[PATCH] treewide: fix spelling mistake: "lenght" -> "length"
From: Matteo Croce
Date: Fri Nov 30 2018 - 20:10:45 EST
Really not a big issue, but can be irritating when searching for the
"length" word can't find the code you're looking for.
Signed-off-by: Matteo Croce <mcroce@xxxxxxxxxx>
---
Documentation/devicetree/bindings/usb/s3c2410-usb.txt | 2 +-
arch/powerpc/include/asm/hvsi.h | 2 +-
block/blk-core.c | 2 +-
drivers/clk/samsung/clk.h | 2 +-
drivers/gpu/drm/amd/include/atombios.h | 2 +-
drivers/gpu/drm/omapdrm/dss/hdmi4_core.c | 2 +-
drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h | 2 +-
drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c | 2 +-
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h | 2 +-
drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 2 +-
drivers/pinctrl/pinctrl-amd.c | 2 +-
drivers/scsi/be2iscsi/be_cmds.c | 2 +-
drivers/scsi/lpfc/lpfc_debugfs.c | 4 ++--
drivers/staging/comedi/drivers/usbduxfast.c | 2 +-
drivers/usb/gadget/udc/aspeed-vhub/epn.c | 2 +-
drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.c | 2 +-
include/net/cfg80211.h | 2 +-
kernel/sysctl.c | 2 +-
sound/soc/qcom/qdsp6/q6asm.c | 2 +-
tools/perf/util/hist.c | 2 +-
20 files changed, 21 insertions(+), 21 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/s3c2410-usb.txt b/Documentation/devicetree/bindings/usb/s3c2410-usb.txt
index e45b38ce2986..26c85afd0b53 100644
--- a/Documentation/devicetree/bindings/usb/s3c2410-usb.txt
+++ b/Documentation/devicetree/bindings/usb/s3c2410-usb.txt
@@ -4,7 +4,7 @@ OHCI
Required properties:
- compatible: should be "samsung,s3c2410-ohci" for USB host controller
- - reg: address and lenght of the controller memory mapped region
+ - reg: address and length of the controller memory mapped region
- interrupts: interrupt number for the USB OHCI controller
- clocks: Should reference the bus and host clocks
- clock-names: Should contain two strings
diff --git a/arch/powerpc/include/asm/hvsi.h b/arch/powerpc/include/asm/hvsi.h
index 3fdc54df63c9..464a7519ed64 100644
--- a/arch/powerpc/include/asm/hvsi.h
+++ b/arch/powerpc/include/asm/hvsi.h
@@ -64,7 +64,7 @@ struct hvsi_priv {
unsigned int inbuf_len; /* data in input buffer */
unsigned char inbuf[HVSI_INBUF_SIZE];
unsigned int inbuf_cur; /* Cursor in input buffer */
- unsigned int inbuf_pktlen; /* packet lenght from cursor */
+ unsigned int inbuf_pktlen; /* packet length from cursor */
atomic_t seqno; /* packet sequence number */
unsigned int opened:1; /* driver opened */
unsigned int established:1; /* protocol established */
diff --git a/block/blk-core.c b/block/blk-core.c
index deb56932f8c4..17ec34eb389a 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -653,7 +653,7 @@ void blk_queue_bypass_start(struct request_queue *q)
/*
* Queues start drained. Skip actual draining till init is
- * complete. This avoids lenghty delays during queue init which
+ * complete. This avoids lengthy delays during queue init which
* can happen many times during boot.
*/
if (blk_queue_init_done(q)) {
diff --git a/drivers/clk/samsung/clk.h b/drivers/clk/samsung/clk.h
index c3f309d7100d..9cfaca5fbcdb 100644
--- a/drivers/clk/samsung/clk.h
+++ b/drivers/clk/samsung/clk.h
@@ -26,7 +26,7 @@ struct samsung_clk_provider {
void __iomem *reg_base;
struct device *dev;
spinlock_t lock;
- /* clk_data must be the last entry due to variable lenght 'hws' array */
+ /* clk_data must be the last entry due to variable length 'hws' array */
struct clk_hw_onecell_data clk_data;
};
diff --git a/drivers/gpu/drm/amd/include/atombios.h b/drivers/gpu/drm/amd/include/atombios.h
index 7931502fa54f..8ba21747b40a 100644
--- a/drivers/gpu/drm/amd/include/atombios.h
+++ b/drivers/gpu/drm/amd/include/atombios.h
@@ -4106,7 +4106,7 @@ typedef struct _ATOM_LCD_MODE_CONTROL_CAP
typedef struct _ATOM_FAKE_EDID_PATCH_RECORD
{
UCHAR ucRecordType;
- UCHAR ucFakeEDIDLength; // = 128 means EDID lenght is 128 bytes, otherwise the EDID length = ucFakeEDIDLength*128
+ UCHAR ucFakeEDIDLength; // = 128 means EDID length is 128 bytes, otherwise the EDID length = ucFakeEDIDLength*128
UCHAR ucFakeEDIDString[1]; // This actually has ucFakeEdidLength elements.
} ATOM_FAKE_EDID_PATCH_RECORD;
diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi4_core.c b/drivers/gpu/drm/omapdrm/dss/hdmi4_core.c
index 813ba42f2753..e384b95ad857 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi4_core.c
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi4_core.c
@@ -708,7 +708,7 @@ int hdmi4_audio_config(struct hdmi_core_data *core, struct hdmi_wp_data *wp,
else
acore.i2s_cfg.justification = HDMI_AUDIO_JUSTIFY_RIGHT;
/*
- * The I2S input word length is twice the lenght given in the IEC-60958
+ * The I2S input word length is twice the length given in the IEC-60958
* status word. If the word size is greater than
* 20 bits, increment by one.
*/
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
index dcf6e27cc16f..d8085ce579f4 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
@@ -36,7 +36,7 @@
#define BRCMF_DCMD_MEDLEN 1536
#define BRCMF_DCMD_MAXLEN 8192
-/* IOCTL from host to device are limited in lenght. A device can only handle
+/* IOCTL from host to device are limited in length. A device can only handle
* ethernet frame size. This limitation is to be applied by protocol layer.
*/
#define BRCMF_TX_IOCTL_MAX_MSG_SIZE (ETH_FRAME_LEN+ETH_FCS_LEN)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
index 9095b830ae4d..aff88ec9c1d7 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
@@ -46,7 +46,7 @@ enum nvram_parser_state {
* @state: current parser state.
* @data: input buffer being parsed.
* @nvram: output buffer with parse result.
- * @nvram_len: lenght of parse result.
+ * @nvram_len: length of parse result.
* @line: current line.
* @column: current column in line.
* @pos: byte offset in input buffer.
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h
index 816f80ea925b..31f3e8e83a21 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h
@@ -266,7 +266,7 @@ struct brcmf_event {
* @status: status information.
* @reason: reason code.
* @auth_type: authentication type.
- * @datalen: lenght of event data buffer.
+ * @datalen: length of event data buffer.
* @addr: ether address.
* @ifname: interface name.
* @ifidx: interface index.
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
index a4308c6e72d7..0b7d977510c8 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
@@ -508,7 +508,7 @@ static void brcmf_usb_rx_complete(struct urb *urb)
skb = req->skb;
req->skb = NULL;
- /* zero lenght packets indicate usb "failure". Do not refill */
+ /* zero length packets indicate usb "failure". Do not refill */
if (urb->status != 0 || !urb->actual_length) {
brcmu_pkt_buf_free_skb(skb);
brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL);
diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c
index 67718b0f978d..d58d4f88d041 100644
--- a/drivers/pinctrl/pinctrl-amd.c
+++ b/drivers/pinctrl/pinctrl-amd.c
@@ -489,7 +489,7 @@ static int amd_gpio_irq_set_type(struct irq_data *d, unsigned int type)
/*
* If WAKE_INT_MASTER_REG.MaskStsEn is set, a software write to the
* debounce registers of any GPIO will block wake/interrupt status
- * generation for *all* GPIOs for a lenght of time that depends on
+ * generation for *all* GPIOs for a length of time that depends on
* WAKE_INT_MASTER_REG.MaskStsLength[11:0]. During this period the
* INTERRUPT_ENABLE bit will read as 0.
*
diff --git a/drivers/scsi/be2iscsi/be_cmds.c b/drivers/scsi/be2iscsi/be_cmds.c
index 0a6972ee94d7..ea042c1fc70d 100644
--- a/drivers/scsi/be2iscsi/be_cmds.c
+++ b/drivers/scsi/be2iscsi/be_cmds.c
@@ -963,7 +963,7 @@ int beiscsi_cmd_q_destroy(struct be_ctrl_info *ctrl, struct be_queue_info *q,
* @ctrl: ptr to ctrl_info
* @cq: Completion Queue
* @dq: Default Queue
- * @lenght: ring size
+ * @length: ring size
* @entry_size: size of each entry in DEFQ
* @is_header: Header or Data DEFQ
* @ulp_num: Bind to which ULP
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 34d311a7dbef..eb61b000b826 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -3967,7 +3967,7 @@ lpfc_idiag_queacc_write(struct file *file, const char __user *buf,
* lpfc_idiag_drbacc_read_reg - idiag debugfs read a doorbell register
* @phba: The pointer to hba structure.
* @pbuffer: The pointer to the buffer to copy the data to.
- * @len: The lenght of bytes to copied.
+ * @len: The length of bytes to copied.
* @drbregid: The id to doorbell registers.
*
* Description:
@@ -4177,7 +4177,7 @@ lpfc_idiag_drbacc_write(struct file *file, const char __user *buf,
* lpfc_idiag_ctlacc_read_reg - idiag debugfs read a control registers
* @phba: The pointer to hba structure.
* @pbuffer: The pointer to the buffer to copy the data to.
- * @len: The lenght of bytes to copied.
+ * @len: The length of bytes to copied.
* @drbregid: The id to doorbell registers.
*
* Description:
diff --git a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c
index e18c0723b760..b91fe9fe1bdb 100644
--- a/drivers/staging/comedi/drivers/usbduxfast.c
+++ b/drivers/staging/comedi/drivers/usbduxfast.c
@@ -61,7 +61,7 @@
#define USBDUXFASTSUB_CPUCS 0xE600
/*
- * max lenghth of the transfer-buffer for software upload
+ * max lengthh of the transfer-buffer for software upload
*/
#define TB_LEN 0x2000
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/epn.c b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
index 4a28e3fbeb0b..83340f4fdc6e 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/epn.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
@@ -120,7 +120,7 @@ static void ast_vhub_epn_handle_ack(struct ast_vhub_ep *ep)
/* No current DMA ongoing */
req->active = false;
- /* Grab lenght out of HW */
+ /* Grab length out of HW */
len = VHUB_EP_DMA_TX_SIZE(stat);
/* If not using DMA, copy data out if needed */
diff --git a/drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.c b/drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.c
index fa72e735dad2..d146793dd044 100644
--- a/drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.c
+++ b/drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.c
@@ -712,7 +712,7 @@ int hdmi4_audio_config(struct hdmi_core_data *core, struct hdmi_wp_data *wp,
else
acore.i2s_cfg.justification = HDMI_AUDIO_JUSTIFY_RIGHT;
/*
- * The I2S input word length is twice the lenght given in the IEC-60958
+ * The I2S input word length is twice the length given in the IEC-60958
* status word. If the word size is greater than
* 20 bits, increment by one.
*/
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 1fa41b7a1be3..00dfc1db0cde 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -5320,7 +5320,7 @@ void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid,
* @dev: network device
* @macaddr: the MAC address of the new candidate
* @ie: information elements advertised by the peer candidate
- * @ie_len: lenght of the information elements buffer
+ * @ie_len: length of the information elements buffer
* @gfp: allocation flags
*
* This function notifies cfg80211 that the mesh peer candidate has been
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 5fc724e4e454..8106bae68388 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -191,7 +191,7 @@ extern int no_unaligned_warning;
* file position 0 and the value must be fully contained in the buffer
* sent to the write syscall. If dealing with strings respect the file
* position, but restrict this to the max length of the buffer, anything
- * passed the max lenght will be ignored. Multiple writes will append
+ * passed the max length will be ignored. Multiple writes will append
* to the buffer.
*
* These write modes control how current file position affects the behavior of
diff --git a/sound/soc/qcom/qdsp6/q6asm.c b/sound/soc/qcom/qdsp6/q6asm.c
index e1cfa846a1dc..33cf0f1a9946 100644
--- a/sound/soc/qcom/qdsp6/q6asm.c
+++ b/sound/soc/qcom/qdsp6/q6asm.c
@@ -1189,7 +1189,7 @@ EXPORT_SYMBOL_GPL(q6asm_open_read);
* q6asm_write_async() - non blocking write
*
* @ac: audio client pointer
- * @len: lenght in bytes
+ * @len: length in bytes
* @msw_ts: timestamp msw
* @lsw_ts: timestamp lsw
* @wflags: flags associated with write
diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c
index 828cb9794c76..8aad8330e392 100644
--- a/tools/perf/util/hist.c
+++ b/tools/perf/util/hist.c
@@ -1160,7 +1160,7 @@ void hist_entry__delete(struct hist_entry *he)
/*
* If this is not the last column, then we need to pad it according to the
- * pre-calculated max lenght for this column, otherwise don't bother adding
+ * pre-calculated max length for this column, otherwise don't bother adding
* spaces because that would break viewing this with, for instance, 'less',
* that would show tons of trailing spaces when a long C++ demangled method
* names is sampled.
--
2.19.1