RE: [PATCHv2 3/6] PCI: layerscape: Add the EP mode support

[Xiaowei Bao]

Hi Lorenzo,

-----Original Message-----
From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx> 
Sent: 2018年11月30日 18:55
To: Xiaowei Bao <xiaowei.bao@xxxxxxx>
Cc: bhelgaas@xxxxxxxxxx; robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx; shawnguo@xxxxxxxxxx; Leo Li <leoyang.li@xxxxxxx>; kishon@xxxxxx; arnd@xxxxxxxx; gregkh@xxxxxxxxxxxxxxxxxxx; M.h. Lian <minghuan.lian@xxxxxxx>; Mingkai Hu <mingkai.hu@xxxxxxx>; Roy Zang <roy.zang@xxxxxxx>; kstewart@xxxxxxxxxxxxxxxxxxx; cyrille.pitchen@xxxxxxxxxxxxxxxxxx; pombredanne@xxxxxxxx; shawn.lin@xxxxxxxxxxxxxx; niklas.cassel@xxxxxxxx; linux-pci@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linuxppc-dev@xxxxxxxxxxxxxxxx
Subject: Re: [PATCHv2 3/6] PCI: layerscape: Add the EP mode support

On Mon, Nov 05, 2018 at 04:46:50PM +0800, Xiaowei Bao wrote:
> Add the EP mode support.
> 
> Signed-off-by: Xiaowei Bao <xiaowei.bao@xxxxxxx>
> ---
> v2:
>  - Add the SoC specific compatibles.
> 
>  .../devicetree/bindings/pci/layerscape-pci.txt     |    3 +++
>  1 files changed, 3 insertions(+), 0 deletions(-)

Wrong commit $SUBJECT, this is not PCI code, it is a DT binding update, I will have a look at the rest of the series to see if I can update this patch or you will do it with the next respin.

Lorenzo
[Xiaowei Bao] HI Lorenzo, thanks a lot, I will send V3 patch to modify the commits. 

> diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt 
> b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> index 66df1e8..9c090c7 100644
> --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> @@ -13,12 +13,15 @@ information.
>  
>  Required properties:
>  - compatible: should contain the platform identifier such as:
> +  RC mode:
>          "fsl,ls1021a-pcie", "snps,dw-pcie"
>          "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie"
>          "fsl,ls2088a-pcie"
>          "fsl,ls1088a-pcie"
>          "fsl,ls1046a-pcie"
>          "fsl,ls1012a-pcie"
> +  EP mode:
> +        "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
>  - reg: base addresses and lengths of the PCIe controller register blocks.
>  - interrupts: A list of interrupt outputs of the controller. Must contain an
>    entry for each entry in the interrupt-names property.
> --
> 1.7.1
>