Re: [PATCH 5/5] i2c: mediatek: Add i2c compatible for MediaTek MT8183

From: Sean Wang
Date: Tue Dec 04 2018 - 00:49:42 EST

Next message: H. Peter Anvin: "Re: [PATCH] x86/boot: clear rsdp address in boot_params for broken loaders"
Previous message: Chanwoo Choi: "Re: [PATCH v2 2/5] devfreq: add support for suspend/resume of a devfreq device"
In reply to: qii.wang: "[PATCH 5/5] i2c: mediatek: Add i2c compatible for MediaTek MT8183"
Next in thread: qii.wang: "[PATCH 2/5] i2c: mediatek: remove useless code and replace definitions"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

<qii.wang@xxxxxxxxxxxx> æ 2018å12æ3æ éä äå5:34åéï
>
> From: qii wang <qii.wang@xxxxxxxxxxxx>
>
> Add i2c compatible for MT8183. Compare to 2712 i2c controller, MT8183 has
> different registers, offsets, clock, and multi-user function.
>
> Signed-off-by: qii wang <qii.wang@xxxxxxxxxxxx>
> ---
> drivers/i2c/busses/i2c-mt65xx.c | 136 +++++++++++++++++++++++++++++++++++++--
> 1 file changed, 130 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
> index 428ac99..6b979ab 100644
> --- a/drivers/i2c/busses/i2c-mt65xx.c
> +++ b/drivers/i2c/busses/i2c-mt65xx.c
> @@ -35,17 +35,23 @@
> #include <linux/slab.h>
>
> #define I2C_RS_TRANSFER (1 << 4)
> +#define I2C_ARB_LOST (1 << 3)

it seems no one refers to the macro in the patch so it should be
better to be removed

> #define I2C_HS_NACKERR (1 << 2)
> #define I2C_ACKERR (1 << 1)
> #define I2C_TRANSAC_COMP (1 << 0)
> #define I2C_TRANSAC_START (1 << 0)
> +#define I2C_RESUME_ARBIT (1 << 1)
> #define I2C_RS_MUL_CNFG (1 << 15)
> #define I2C_RS_MUL_TRIG (1 << 14)
> +#define I2C_HS_TIME_EN (1 << 7)
> #define I2C_DCM_DISABLE 0x0000
> #define I2C_IO_CONFIG_OPEN_DRAIN 0x0003
> #define I2C_IO_CONFIG_PUSH_PULL 0x0000
> #define I2C_SOFT_RST 0x0001
> #define I2C_FIFO_ADDR_CLR 0x0001
> +#define I2C_FIFO_ADDR_CLRH 0x0002
> +#define I2C_FIFO_ADDR_CLR_MCH 0x0004
> +#define I2C_HFIFO_DATA 0x8208
> #define I2C_DELAY_LEN 0x0002
> #define I2C_ST_START_CON 0x8001
> #define I2C_FS_START_CON 0x1800
> @@ -76,6 +82,8 @@
> #define I2C_CONTROL_DIR_CHANGE (0x1 << 4)
> #define I2C_CONTROL_ACKERR_DET_EN (0x1 << 5)
> #define I2C_CONTROL_TRANSFER_LEN_CHANGE (0x1 << 6)
> +#define I2C_CONTROL_DMAACK_EN (0x1 << 8)
> +#define I2C_CONTROL_ASYNC_MODE (0x1 << 9)
> #define I2C_CONTROL_WRAPPER (0x1 << 0)
>
> #define I2C_DRV_NAME "i2c-mt65xx"
> @@ -130,6 +138,15 @@ enum I2C_REGS_OFFSET {
> OFFSET_DEBUGCTRL,
> OFFSET_TRANSFER_LEN_AUX,
> OFFSET_CLOCK_DIV,
> + /* MT8183 only regs */
> + OFFSET_LTIMING,
> + OFFSET_DATA_TIMING,
> + OFFSET_MCU_INTR,
> + OFFSET_HW_TIMEOUT,
> + OFFSET_HFIFO_DATA,
> + OFFSET_HFIFO_STAT,
> + OFFSET_MULTI_DMA,
> + OFFSET_ROLLBACK,
> };
>
> static const u16 mt_i2c_regs_v1[] = {
> @@ -159,6 +176,39 @@ enum I2C_REGS_OFFSET {
> [OFFSET_CLOCK_DIV] = 0x70,
> };
>
> +static const u16 mt_i2c_regs_v2[] = {
> + [OFFSET_DATA_PORT] = 0x0,
> + [OFFSET_SLAVE_ADDR] = 0x4,
> + [OFFSET_INTR_MASK] = 0x8,
> + [OFFSET_INTR_STAT] = 0xc,
> + [OFFSET_CONTROL] = 0x10,
> + [OFFSET_TRANSFER_LEN] = 0x14,
> + [OFFSET_TRANSAC_LEN] = 0x18,
> + [OFFSET_DELAY_LEN] = 0x1c,
> + [OFFSET_TIMING] = 0x20,
> + [OFFSET_START] = 0x24,
> + [OFFSET_EXT_CONF] = 0x28,
> + [OFFSET_LTIMING] = 0x2c,
> + [OFFSET_HS] = 0x30,
> + [OFFSET_IO_CONFIG] = 0x34,
> + [OFFSET_FIFO_ADDR_CLR] = 0x38,
> + [OFFSET_DATA_TIMING] = 0x3c,
> + [OFFSET_MCU_INTR] = 0x40,
> + [OFFSET_TRANSFER_LEN_AUX] = 0x44,
> + [OFFSET_CLOCK_DIV] = 0x48,
> + [OFFSET_HW_TIMEOUT] = 0x4c,
> + [OFFSET_SOFTRESET] = 0x50,
> + [OFFSET_HFIFO_DATA] = 0x70,
> + [OFFSET_DEBUGSTAT] = 0xe0,
> + [OFFSET_DEBUGCTRL] = 0xe8,
> + [OFFSET_FIFO_STAT] = 0xf4,
> + [OFFSET_FIFO_THRESH] = 0xf8,
> + [OFFSET_HFIFO_STAT] = 0xfc,
> + [OFFSET_DCM_EN] = 0xf88,
> + [OFFSET_MULTI_DMA] = 0xf8c,
> + [OFFSET_ROLLBACK] = 0xf98,
> +};
> +
> struct mtk_i2c_compatible {
> const struct i2c_adapter_quirks *quirks;
> const u16 *regs;
> @@ -168,6 +218,7 @@ struct mtk_i2c_compatible {
> unsigned char aux_len_reg: 1;
> unsigned char support_33bits: 1;
> unsigned char timing_adjust: 1;
> + unsigned char dma_sync: 1;
> };
>
> struct mtk_i2c {
> @@ -181,8 +232,11 @@ struct mtk_i2c {
> struct clk *clk_main; /* main clock for i2c bus */
> struct clk *clk_dma; /* DMA clock for i2c via DMA */
> struct clk *clk_pmic; /* PMIC clock for i2c from PMIC */
> + struct clk *clk_arb; /* Arbitrator clock for i2c */
> bool have_pmic; /* can use i2c pins from PMIC */
> bool use_push_pull; /* IO config push-pull mode */
> + bool share_i3c; /* share i3c IP*/
> + u32 ch_offset; /* i2c multi-user channel offset */
>
> u16 irq_stat; /* interrupt status */
> unsigned int clk_src_div;
> @@ -190,6 +244,7 @@ struct mtk_i2c {
> enum mtk_trans_op op;
> u16 timing_reg;
> u16 high_speed_reg;
> + u16 ltiming_reg;
> unsigned char auto_restart;
> bool ignore_restart_irq;
> const struct mtk_i2c_compatible *dev_comp;
> @@ -216,6 +271,7 @@ struct mtk_i2c {
> .aux_len_reg = 1,
> .support_33bits = 1,
> .timing_adjust = 1,
> + .dma_sync = 0,
> };
>
> static const struct mtk_i2c_compatible mt6577_compat = {
> @@ -227,6 +283,7 @@ struct mtk_i2c {
> .aux_len_reg = 0,
> .support_33bits = 0,
> .timing_adjust = 0,
> + .dma_sync = 0,
> };
>
> static const struct mtk_i2c_compatible mt6589_compat = {
> @@ -238,6 +295,7 @@ struct mtk_i2c {
> .aux_len_reg = 0,
> .support_33bits = 0,
> .timing_adjust = 0,
> + .dma_sync = 0,
> };
>
> static const struct mtk_i2c_compatible mt7622_compat = {
> @@ -249,6 +307,7 @@ struct mtk_i2c {
> .aux_len_reg = 1,
> .support_33bits = 0,
> .timing_adjust = 0,
> + .dma_sync = 0,
> };
>
> static const struct mtk_i2c_compatible mt8173_compat = {
> @@ -259,6 +318,18 @@ struct mtk_i2c {
> .aux_len_reg = 1,
> .support_33bits = 1,
> .timing_adjust = 0,
> + .dma_sync = 0,
> +};
> +
> +static const struct mtk_i2c_compatible mt8183_compat = {
> + .regs = mt_i2c_regs_v2,
> + .pmic_i2c = 0,
> + .dcm = 0,
> + .auto_restart = 1,
> + .aux_len_reg = 1,
> + .support_33bits = 1,
> + .timing_adjust = 1,
> + .dma_sync = 1,
> };
>
> static const struct of_device_id mtk_i2c_of_match[] = {
> @@ -267,19 +338,20 @@ struct mtk_i2c {
> { .compatible = "mediatek,mt6589-i2c", .data = &mt6589_compat },
> { .compatible = "mediatek,mt7622-i2c", .data = &mt7622_compat },
> { .compatible = "mediatek,mt8173-i2c", .data = &mt8173_compat },
> + { .compatible = "mediatek,mt8183-i2c", .data = &mt8183_compat },
> {}
> };
> MODULE_DEVICE_TABLE(of, mtk_i2c_of_match);
>
> static u16 mtk_i2c_readw(struct mtk_i2c *i2c, enum I2C_REGS_OFFSET reg)
> {
> - return readw(i2c->base + i2c->dev_comp->regs[reg]);
> + return readw(i2c->base + i2c->ch_offset + i2c->dev_comp->regs[reg]);
> }
>
> static void mtk_i2c_writew(struct mtk_i2c *i2c, u16 val,
> enum I2C_REGS_OFFSET reg)
> {
> - writew(val, i2c->base + i2c->dev_comp->regs[reg]);
> + writew(val, i2c->base + i2c->ch_offset + i2c->dev_comp->regs[reg]);
> }
>
> static int mtk_i2c_clock_enable(struct mtk_i2c *i2c)
> @@ -299,8 +371,18 @@ static int mtk_i2c_clock_enable(struct mtk_i2c *i2c)
> if (ret)
> goto err_pmic;
> }
> +
> + if (i2c->clk_arb) {
> + ret = clk_prepare_enable(i2c->clk_arb);
> + if (ret)
> + goto err_arb;
> + }
> +
> return 0;
>
> +err_arb:
> + if (i2c->have_pmic)
> + clk_disable_unprepare(i2c->clk_pmic);
> err_pmic:
> clk_disable_unprepare(i2c->clk_main);
> err_main:
> @@ -311,6 +393,9 @@ static int mtk_i2c_clock_enable(struct mtk_i2c *i2c)
>
> static void mtk_i2c_clock_disable(struct mtk_i2c *i2c)
> {
> + if (i2c->clk_arb)
> + clk_disable_unprepare(i2c->clk_arb);
> +
> if (i2c->have_pmic)
> clk_disable_unprepare(i2c->clk_pmic);
>
> @@ -333,11 +418,23 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
> if (i2c->dev_comp->dcm)
> mtk_i2c_writew(i2c, I2C_DCM_DISABLE, OFFSET_DCM_EN);
>
> - if (i2c->dev_comp->timing_adjust)
> + if (i2c->ch_offset)
> + writew(I2C_RESUME_ARBIT, i2c->base +
> + i2c->dev_comp->regs[OFFSET_START]);
> +
> + if (i2c->dev_comp->timing_adjust && i2c->share_i3c) {
> + mtk_i2c_writew(i2c, (I2C_DEFAULT_CLK_DIV - 1) |
> + (I2C_DEFAULT_CLK_DIV - 1) << 8,
> + OFFSET_CLOCK_DIV);
> + i2c->high_speed_reg |= I2C_HS_TIME_EN;
> + } else {
> mtk_i2c_writew(i2c, I2C_DEFAULT_CLK_DIV - 1, OFFSET_CLOCK_DIV);
> + }
>
> mtk_i2c_writew(i2c, i2c->timing_reg, OFFSET_TIMING);
> mtk_i2c_writew(i2c, i2c->high_speed_reg, OFFSET_HS);
> + if (i2c->dev_comp->regs == mt_i2c_regs_v2)
> + mtk_i2c_writew(i2c, i2c->ltiming_reg, OFFSET_LTIMING);
>
> /* If use i2c pin from PMIC mt6397 side, need set PATH_DIR first */
> if (i2c->have_pmic)
> @@ -345,6 +442,9 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
>
> control_reg = I2C_CONTROL_ACKERR_DET_EN |
> I2C_CONTROL_CLK_EXT_EN | I2C_CONTROL_DMA_EN;
> + if (i2c->dev_comp->dma_sync)
> + control_reg |= I2C_CONTROL_DMAACK_EN | I2C_CONTROL_ASYNC_MODE;
> +
> mtk_i2c_writew(i2c, control_reg, OFFSET_CONTROL);
> mtk_i2c_writew(i2c, I2C_DELAY_LEN, OFFSET_DELAY_LEN);
>
> @@ -434,6 +534,8 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
> unsigned int clk_src;
> unsigned int step_cnt;
> unsigned int sample_cnt;
> + unsigned int l_step_cnt;
> + unsigned int l_sample_cnt;
> unsigned int target_speed;
> int ret;
>
> @@ -443,11 +545,11 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
> if (target_speed > MAX_FS_MODE_SPEED) {
> /* Set master code speed register */
> ret = mtk_i2c_calculate_speed(i2c, clk_src, MAX_FS_MODE_SPEED,
> - &step_cnt, &sample_cnt);
> + &l_step_cnt, &l_sample_cnt);
> if (ret < 0)
> return ret;
>
> - i2c->timing_reg = (sample_cnt << 8) | step_cnt;
> + i2c->timing_reg = (l_sample_cnt << 8) | l_step_cnt;
>
> /* Set the high speed mode register */
> ret = mtk_i2c_calculate_speed(i2c, clk_src, target_speed,
> @@ -457,6 +559,8 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
>
> i2c->high_speed_reg = I2C_TIME_DEFAULT_VALUE |
> (sample_cnt << 12) | (step_cnt << 8);
> + i2c->ltiming_reg = (l_sample_cnt << 6) | l_step_cnt |
> + (sample_cnt << 12) | (step_cnt << 9);
> } else {
> ret = mtk_i2c_calculate_speed(i2c, clk_src, target_speed,
> &step_cnt, &sample_cnt);
> @@ -467,6 +571,8 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
>
> /* Disable the high speed transaction */
> i2c->high_speed_reg = I2C_TIME_CLR_VALUE;
> +
> + i2c->ltiming_reg = (sample_cnt << 6) | step_cnt;
> }
>
> return 0;
> @@ -483,6 +589,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
> u16 addr_reg;
> u16 start_reg;
> u16 control_reg;
> + u16 fifo_clr_reg;
> u16 restart_flag = 0;
> u32 reg_4g_mode;
> u8 *dma_rd_buf = NULL;
> @@ -521,7 +628,15 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
> mtk_i2c_writew(i2c, restart_flag | I2C_HS_NACKERR | I2C_ACKERR |
> I2C_TRANSAC_COMP, OFFSET_INTR_STAT);
>
> - mtk_i2c_writew(i2c, I2C_FIFO_ADDR_CLR, OFFSET_FIFO_ADDR_CLR);

There's a missing initialization to fifo_clr_reg here, I guess
fifo_clr_reg = I2C_FIFO_ADDR_CLR should be necessarily made here;

> + if (i2c->share_i3c)
> + fifo_clr_reg = I2C_FIFO_ADDR_CLR | I2C_FIFO_ADDR_CLRH;

fifo_clr_reg |= I2C_FIFO_ADDR_CLRH baed on initialized value

> + if (i2c->ch_offset)
> + fifo_clr_reg = I2C_FIFO_ADDR_CLR | I2C_FIFO_ADDR_CLR_MCH;

and then fifo_clr_reg |= I2C_FIFO_ADDR_CLR_MCH;

> +
> + mtk_i2c_writew(i2c, fifo_clr_reg, OFFSET_FIFO_ADDR_CLR);
> +
> + if ((i2c->speed_hz > MAX_FS_MODE_SPEED) && i2c->share_i3c)
> + mtk_i2c_writew(i2c, I2C_HFIFO_DATA, OFFSET_HFIFO_DATA);
>
> /* Enable interrupt */
> mtk_i2c_writew(i2c, restart_flag | I2C_HS_NACKERR | I2C_ACKERR |
> @@ -817,6 +932,11 @@ static int mtk_i2c_parse_dt(struct device_node *np, struct mtk_i2c *i2c)
> if (i2c->clk_src_div == 0)
> return -EINVAL;
>
> + ret = of_property_read_u32(np, "ch-offset", &i2c->ch_offset);

if ch-offset is a vendor-specific property, it should be better to add
a vendor prefix

> + if (ret < 0)
> + i2c->ch_offset = 0;
> +
> + i2c->share_i3c = of_property_read_bool(np, "mediatek,share-i3c");
> i2c->have_pmic = of_property_read_bool(np, "mediatek,have-pmic");
> i2c->use_push_pull =
> of_property_read_bool(np, "mediatek,use-push-pull");
> @@ -884,6 +1004,10 @@ static int mtk_i2c_probe(struct platform_device *pdev)
> return PTR_ERR(i2c->clk_dma);
> }
>
> + i2c->clk_arb = devm_clk_get(&pdev->dev, "arb");
> + if (IS_ERR(i2c->clk_arb))
> + i2c->clk_arb = NULL;
> +
> clk = i2c->clk_main;
> if (i2c->have_pmic) {
> i2c->clk_pmic = devm_clk_get(&pdev->dev, "pmic");
> --
> 1.7.9.5
>
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

Next message: H. Peter Anvin: "Re: [PATCH] x86/boot: clear rsdp address in boot_params for broken loaders"
Previous message: Chanwoo Choi: "Re: [PATCH v2 2/5] devfreq: add support for suspend/resume of a devfreq device"
In reply to: qii.wang: "[PATCH 5/5] i2c: mediatek: Add i2c compatible for MediaTek MT8183"
Next in thread: qii.wang: "[PATCH 2/5] i2c: mediatek: remove useless code and replace definitions"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]